Repair / maintenance of DG Sets Voltage Stabilizers crane services of incinerators washing mahines Air Compressor and allied items of ACCS under GE (N) Ahmednagar

Amount

Inspection, maintenance and servicing of DG sets of the following capacities including alternator, electric panel board connection to DG Set for routine check ('A' check) of DG set for smooth functioning and carriying out maintenance ect complete all as specified and directed by Engineer-in-Charge :- Monthly Service (a) Checking engine oil level and topping up as and when required NOTE : Oil shall be measured and paid separately (b) Checking and adjusting the belt for tension and replacemnt of belt NOTE: Belt shall be measured and paid separately (c) Checking of oil bath air cleaner level (d) Checking of exhaust system for leakage (e) Draining of sediment from fuel filter and fuel tank (f) Cleaning of air cleaner element. Note : Replacement of Air Cleaner shall be measured and paid separately. (g) Checking engine alternator coupling, mounting bolts and alignment. (h) Tighting all nut, bolts, in alternator terminal block. (j) Checking of alternator carbon brush and connections in alternator

(k) Checking and tighting of all connection in DC control wiring. (m) Checking and recording oil pressure, water and oil temperature (n) Checking anti vibration mounting and replacement if required. NOTE: Anti vibration pad shall be measured and paid separately. (o) Checking throttle linkage (p) Checking battery for cell test, electrolyte level, gravity and topping up to required level (q) Routine check / repair work of panel, switch, MCCB, main switch, all contactor, engine control unit.

a) 320 KVA MAKE: CATERPILLAR Model 3406 B DITA

b) 110 / 125 KVA MAKE: Cummmins Model NT 495 G / Kirloskar Model 6R1080 TA.

c) 160 KVA Make: Greaves Model TBDV6 MK - I

d) 63.5 KVA MAKE: Greaves Model 3 YDC MK -III / Kirloskar Model 4R104OT

e) 15 KVA MAKE: Kirloskar Model HA 294 / Greaves Model 2 YDA

f) 40 KVA MAKE: Kirloskar Model HA 494 TC / 4R1040 / Greaves 4 YD

g) 20 / 30 KVA MAKE: Greaves Model 2/3 YWA MK-5 / Kirloskar model HA394

h) 10 / 7.5 KVA MAKE: Kirloskar Model TA 2 S-II

`B' CHECK ONCE IN SIX MONTH OR 250 HRS RUNNING OF DG SET WHICHEVER IS EARLIER Material and labour required for inspection, maintenance, servicing of DG Sets of following capacities, including items covered in `B' of DG set for smooth functioning and carriying out maintenance complete as per OEM instructions etc completed all as specified and directed by Engineer-in-Charge :- (a) Repeat the activities of 'A' check (b) Replacing lubricant oil Note:- Lub Oil are Paid separately. (c) Replacing lubricant oil filter element with `O' ring (d) Replacing fuel filter element (e) Replacing coolant (f) Replacing Governer oil NOTES : i) `B' check kit, coolant shall be measured and paid seperately under relevant item. ii) Lubricant oil shall be measured and paid separately under relevant item.

a) 320 KVA MAKE: CATERPILLAR Model 3406 B DITA

b) 110 / 125 KVA MAKE: Cummmins Model NT 495 G / Kirloskar Model 6R1080 TA.

c) 160 KVA MAKE: Greaves Model TBDV6 MK - I

d) 63.5 KVA MAKE: Greaves Model 3 YDC MK -III / Kirloskar Model 4R104OT

e) 15 KVA MAKE: Kirloskar Model HA 294 / Greaves Model 2 YDA

f) 40 KVA MAKE: Kirloskar Model HA 494 TC / 4R1040 / Greaves 4 YD

g) 20 / 30 KVA MAKE: Greaves Model 2/3 YWA MK-5 / Kirloskar model HA394

h) 10 / 7.5 KVA MAKE: Kirloskar Model TA 2 S-I

Supply only B' Check Kit for DG sets of following capacities:- Note : It Includes to Oil filter (1.00 Ltr/0.5 ltr), Diesel filter , by pass element

(a) DG Set 320 KVA, Auto Simulator Model No 4AB3015/D2, Make CaterPillar

b) DG Set 160 KVA, CHQ, Model No-TBDV6 MK-I, Make Greaves

c) DG Set 100/110/125 KVA (i) DG Set 100 KVA, AC Record Model No, NT 495 G, Make Cummins (ii )DG Set 100 KVA, SAW office, Model No KG 225L, Make Kirlosker (iii) DG Set 100 KVA , Armament wing, Model No KG 225L, Make Kirlosker (iv) DG Set 110 KVA , MH, Model No 4 AB 250/H2 , Make Cummins (v) DG Set 100 KVA, NFS, Model No AL6DTIG1, Make Ashok Leyland

d) DG Set 63.5 KVA i) DG Set 63 KVA , Sadle Back, Model No-4R1040T, Kirlosker (ii) DG Set 63 KVA , AC Record, Model No-4R1040T, Kirlosker (iii) DG Set 63.5 KVA , Student officer Mess, Model No-3YDC MK3, Greaves (iv) DG Set 63.5 KVA , Bhingar Nala, Model No-NRF225/2, Greaves

e) DG Set 40 KVA (i) DG Set 40 KVA, Snob Height, Model No-NB200M, Kirlosker (ii) DG Set 40 KVA, Armament wing, Model No-KG20051, Kirlosker (iii) DG Set 40 KVA, KK Range ,Model No-KG20051, Kirlosker (iv) DG Set 40 KVA, KK Range ,Model No - S3804, cummins (v) DG Set 40 KVA , Signal Centre, Model-KG20051, Kirlosker (vi) DG Set 40 KVA , A & E Regt, Model No- KG 2R 160M,Kirlosker, HA-494

DG Set 20/25/30KVA (i)DG Set 30 KVA , Station HQ, Model No-KG 1884C, Kirlosker (ii) DG 25 KVA, AC Depot, Model No-NB1801, Greaves (iii) DG 25 KVA, New KLP Sub Stn, KG 184B, Kirlosker (iv) DG 25 KVA , MDC, Model No-3R1040T G1, Kirlosker (v) DG 20 KVA, Armament wing HA394, Kirlosker (vi) DG 20 Kva, kk Range, Model No-G2S160-SG,Greaves (vii) DG 20KVA ,DMR Simulator, model No-GATG-339 Greaves

g) DG Set 15 KVA (i) DG Set 15 KVA, 33 KV Substation, Model No-G-15/ANB), Kirlosker (ii) DG Set 15 KVA , TTSE, Model No NB 1805 Greaves (iii) DG 15 KVA, BTR, Model No-2YWA, Greaves

h) DG Set 10/7.5 KVA (i) DG Set 10 KVA , Exchange, Model No-TA2SR2, Kirlosker (ii) DG Set 7.5 KVA , Stn Officer Mess, Model No-4D62/3,Kirlosker

Disconnecting all the connections from alternator of DG Set of Capacity 110 KVA removing the alternator from foundations , transporting to workshop, dismaintling completely including starter, roter, removing rotor and bearing clening all the parts with thinner and varnishing completely with F class varnishing, applaying expoxy coating, reassembling , dynamically balancing the alternator transporting and fixing on frame and reallignment within tolerance limit , connecting the alternator with all connections and testing on load etc completed all as specified and directed by Engineer-in-Charge

All as per Item No 29 (here-in-before) but 62.5 KVA

All as per Item No 29 (here-in-before) but 40 KVA

All as per Item No 29 (here-in-before) but 25 KVA DG Set

All as per Item No 29 (here-in-before) but 15/20 KVA DG Set

M & L for replacement of defective spare parts of DG Sets of capacity 320 KVA, Model : 4AB 315/D2 Make : Caterpillar including connecting and testing etc completed all as specified and directed by Engineer-in-Charge

(a) Radiator Hose Pipe Set

(b) Air filter (inner & Outer)

(c ) Oil pressure gauge

(d) Anti vibration Pad

(e ) Water Pump assembly

(f) Turbocharger repair Kit

(g) Startor Button

M & L for replacement of defective spare parts of DG Sets of capacity 160 KVA, Model : GIR 250 MB Make : Greaves including connecting and testing etc completed all as specified and directed by Engineer-in-Charge

(a) Fuel Pipe

(b) Air filter (inner & Outer)

(c ) V Belt

(d) Water Pump Kit

(e ) Volt meter

(f) Amp Metre

M & L for replacement of defective spare parts of DG Sets of capacity 125 KVA, Model : CALED 80 Make : Greaves including connecting and testing etc completed all as specified and directed by Engineer-in-Charge

(a) Air filter

(b) V belt

© Fuel Pipe

(d) Battery terminals

(e ) Battery Lead (Red & Black)

M & L for replacement of defective spare parts of DG Sets of capacity 100 KVA, Model : KG 225L Make :Kirlosker including connecting and testing etc completed all as specified and directed by Engineer-in-Charge

(a) Air filter inner Cat No: 6H 411 02 0. 00

(b) Air filter assembly, Cat Part No : 6H411 10. 0 .00

© Batterty Lead

(d) V Belt

(e ) Engine RPM Cum Hrs Meter

(f) Oil Seal

(g) Binjo bolt for pipe

M & L for replacement of defective spare parts of DG Sets of capacity 100 KVA, Model : NT 495G Make :Cummins including connecting and testing etc completed all as specified and directed by Engineer-in-Charge

(a) Air filter Inner

(b) Turbo charger repair Kit

(c )Water Pump Assembly

M & L for replacement of defective spare parts of DG Sets of capacity 63 KVA, Model :KG 225S and Type 4R 1040T Make :Kirlosker including connecting and testing etc completed all as specified and directed by Engineer-in-Charge

(a) Air Filter

(b) V Belt

(c) Battery Lead

(d) Battery terminals

(f) Ferq Meter

(g) Hose Pipe Set

M & L for replacement of defective spare parts of DG Sets of capacity 63 KVA, Model GIR 20OSL & NRF 225/2 Make :Greaves including connecting and testing etc completed all as specified and directed by Engineer-in-Charge

Oil Pressure gauge

RPM Gauge

Amp Metre

Set of Coupling

Oil Seal

M & L for replacement of defective spare parts of DG Sets of capacity 40 KVA,Type 4R 1040 Make :Kirlosker including connecting and testing etc completed all as specified and directed by Engineer-in-Charge

Air filter

V Belt

M & L For welding / brazing of silencer pipe of of DG Set

M & L for replacement of defective spare parts of DG Sets of capacity 40 KVA,Model- S 3804 & NB 200M Make :Greaves including connecting and testing etc completed all as specified and directed by Engineer-in-Charge

Oil Pressure gauge

RPM Gauge

Amp Metre

Engine upper Gas Kit

Air filter

M & L for replacement of defective spare parts of DG Sets of capacity 25 KVA,Model- KG- 184B Make : Kirlosker including connecting and testing etc completed all as specified and directed by Engineer-in-Charge

Hose pipe

Fuel Pipe

Air filter

M & L for replacement of defective spare parts of DG Sets of capacity 25 KVA,Model- NB 1801 Make : Greaves including connecting and testing etc completed all as specified and directed by Engineer-in-Charge

Coupling

Oil Seal

Radiator Core

Fan Belt

Fuel Pipe

Air filter assembly

M & L for replacement of Main Panel board with starting push botton , RPM Metre, Oil pressure gauge etc of DG Set 15 KVA Model No- 2YWA, Greaves etc completed all as specified and directed by Engineer-in-Charge

M & L for replacement of following parts of DG Set 15 KVA Model No- 2YWA, Greaves etc completed all as specified and directed by Engineer-in-Charge

Bty Charger alternator

Piston Set with piston ring

Dismantling of fuel injection pump assembly complete from the engine of following capacity of DG Sets , replacement of valve , washers etc assembling, calibiration, setting for proper function ,refixing and testing etc completed all as specified and directed by Engineer-in-Charge

(a) 320 KVA capacity , Auto Simulator

(b) 160 KVA Capacity , CHQ

(d) 100 KVA, MH, SAW, Armament wing, NFS

(e ) 63 KVA , Saddle back, Arjun Mess, Bhingar Nala,

(f) 40 KVA , KK Range, A&E regt, Armament wing, Snob Height,

(g) 25 KVA , Stn HQ, AC Depot,

(h) 20 KVA, Amn Dump, KK Range, DMR Simulator,Armament wing

(j) 15 KVA, TTSE, BTR, OLD 33 KV Substn

(k) 10 KVA/ 7.5 KVA Exchange and Stn Officer Mess

Dismantling of fuel injector assembly complete from the engine of following capacity of DG Sets, reconditioning/ serving, replacement of pim spiral, washers, Cup injector,retainer, Cup screwetc assembling calibiration, setting for proper function refixing and testing for:

(a) 320 KVA capacity , Auto Simulator

(b ) 125 KVA , Nagar wala Road

(c ) 100 KVA, MH, , SAW, ,NFS

(d) 63 KVA , Saddle back, Arjun Mess, Bhingar Nala,

(e) 40 KVA , KK Range, A&E regt, Armament wing, Snob Height,

(f) 25 KVA , Stn HQ,33 KV New KLP, AC Depot,

(g) 20 KVA, Amn Dump, KK Range, Armament wing

(h) 15 KVA, TTSE, BTR,

(k) 10 KVA/ 7.5 KVA Stn Officer Mess

Dismantling , removing the self startor from the engine of following capacity DG Sets , opening up , over hauling/ servicing, replacement of carbon brushes with holders assembling back, refixing and testing for proper function etc completed all as specified and directed by Engineer-in-Charge

(a) 320 KVA capacity , Auto Simulator

(c ) 125 KVA , Nagar wala Road

(d) 100 KVA, MH, AC Record, Armament wing,NFS

(e ) 63 KVA , Saddle back, Arjun Mess, Bhingar Nala,

(f) 40 KVA , KK Range, A&E regt, Armament wing, Snob Height

(g) 25 KVA , Stn HQ , AC Depot,

(h) 20 KVA, Amn Dump, KK Range, DMR Simulator,Armament wing

(j) 15 KVA, TTSE, BTR, OLD 33 KV Substn

Dismaintling, removing the alternator /dynomo of from the engine of following capacity of DG Sets , opening up over hauling servicing, replcement of carbon brushes with holders, assembling back, refixing and testing for proper function etc completed all as specified and directed by Engineer-in-Charge

(a) 320 KVA capacity , Auto Simulator

(b) 160 KVA Capacity , CHQ

(c ) 125 KVA , Nagar wala Road

(d) 100 KVA, MH, AC Record, SAW, Armament wing,NFS

(e ) 63 KVA , Saddle back, Arjun Mess, Bhingar Nala, AC Record

(f) 40 KVA , KK Range, A&E regt, Armament wing, Snob Height, Old Exchange, New Exchange

(g) 25 KVA , Stn HQ,33 KV New KLP,MDC, AC Depot,

(h) 20 KVA, Amn Dump, KK Range, DMR Simulator,Armament wing

(j) 15 KVA, TTSE, BTR, OLD 33 KV Substn

Dismaintling, radiator assembly from the engine of following capacity of DG Set by disconnecting inlet and out let connections , overhauling/ servicing the radiator , clearing, removing blockages arresting leakages, assembling back incl necessary welding brazing as required , refixing , reconnecting and testing for proper functioning etc completed all as specified and directed by Engineer-in-Charge

(a) 320 KVA capacity , Auto Simulator

(b) 160 KVA Capacity , CHQ

(d) 100 KVA, MH, AC Record, SAW, Armament wing,NFS

(e ) 63 KVA , Saddle back, Arjun Mess, AC Record

(f) 40 KVA , KK Range, New Exchange

(g) 25 KVA , Stn HQ,33 KV New KLP,MDC, AC Depot,

(h) 20 KVA, ,Armament wing

Dismaintling and removing of fuel tanks MS any size / type by disconnecting of fuel pipes connection , draining out of oil from the tank , replacement of all fuel pipe line PVC Connection with new highly transparrent PVC flexible of suitable diameter , painting of outer surfaces of DG sets including fuel tank with synthetic enamel paint , one coat after cleaning scrubing the surfaces incl wrirting by paint the capacity , marking of fuel level indicator etc complete for following DG Sets etc completed all as specified and directed by Engineer-in-Charge

(a) 320 KVA capacity , Auto Simulator

(b) 160 KVA Capacity , CHQ

(c ) 125 KVA , Nagar wala Road

(d) 100 KVA, MH, AC Record, SAW, Armament wing,NFS

(e ) 63 KVA , Saddle back, Arjun Mess, Bhingar Nala, AC Record

(f) 40 KVA , KK Range, A&E regt, Armament wing, Snob Height, Old Exchange, New Exchange

(g) 25 KVA , Stn HQ,33 KV New KLP,MDC, AC Depot,

(h) 20 KVA, Amn Dump, KK Range, DMR Simulator,Armament wing

(j) 15 KVA, TTSE, BTR, OLD 33 KV Substn

(k) 10 KVA/ 7.5 KVA Exchange and Stn Officer Mess

S & F autometic voltage regulator of following capacity etc completed all as specified and directed by Engineer-in-Charge

(a) 25 KVA to 125 KVA

Material and labour for replacement of unserviceable battery 12 V, 180 AH with maintenance free battery 12 Volt initially charged etc completed all as specified and directed by Engineer-in-Charge Make - Exide cat No FXP0-MHD1800

Supply only coolant, K cool Supper plus 50-50 Premix,

Supply only battery water with electrolyte mix

Supply only engine oil 15w40 turbo synthetic superior quality engine oil

Supply and fixing in replacement of expansion ballow for DG set upto 160KVA

M & L for replacement of Door Hinges of various capacity of DG Set

Labour only for perodical maintenance , brake down on call repairs of EOT Crane 2 Ton long travel motor , cross travel motor , gear box , control panel etc. installed at armoured static work shop including dismaintling/replacing the unserviceable spair parts at site etc completed all as specified and directed by Engineer-in-Charge Note:- Rate includes greesing, cleaning, oiling etc.

All as per Item No 173 (here-in-before) but 2.5 Tons

All as Per Item No 173 (here-in-before) but 3.5 Ton

All as per Item No 173 (here-in-before) But 10 Tons

Note For Item No 35 to 48 (a) Maintenance of cranes required to be done in every month which includes cleaning, greasing, , oiling, which ever required, checking of all electrical connections and standard maintenance as recommended by manufacturer . (b) Spare Parts replaced, Oil, Lubricants (except Grease ) required will be measured and paid separately. (c ) Load test carried out in the presence of Engr-in-Charge and users on every month after periodical maintenance (d) contractor shuld attend day to day complaint of crane regularly and maintenance shall be carried out accordingly for smooth functioning and the cost for the same shall be deemed to be include in the above quoted rates.

Supply only spare parts suitable for EOT Crane of capacity of 2.0 ton to 10 Ton.

(a) Wheel with pin shaft

(b) Ball bearing (Bearing No-6207)

(c ) MS Gear for wheel

(d) Steel wire rope multi stranded 10mm, Make Usha Martin

(e ) PVC Coated & PVC Insulated copper conductor multistranded of size 10 sqmm 4 core

(f) HRC fuse link 32 amps as per site requirement

(g) Gear box Oil EP -230

(h) Brake Oil

(j) Brake Shoe of 150mm dia

(k) Magnetic Coil

(l) Limit switch 3 phase 415 volt 50 Hz as per site requirement

(m) Four Pole Contactor Ac Three phase 415volt Amps as per Site requirement

(n) Carbon brushes for clutch for microw movement of EOT Crane

(o) Current collector complete as per existing for EOT Crane of different capacity of EOT Crane

M & L for taking down Gearbox assembly of any capacity of Crane for long travel mechanism , short travel mechanism, updown mechanism , refixing the same after over hauling completely by replacing Gear oil C-600, Gasket set , bushing etc completed all as specified and directed by Engineer-in-Charge. Note: Gear Oil is paid separately and gasket set , bushing etc include the quoted rates.

Taking down and Material and labour for rewinding of electric motor 2HP/415,3HP/415volt,and 5HP/415 volt by using SE Copper wire same gauge and same turns incl varnishing heating, balancing etc from short travel/ long travel mechanism and refixing the same by replacing bearing, varnishing etc completed all as specified and directed by Engineer-in-Charge

Taking down and Mateerial for rewinding of electric motor 10HP/415 volt by using SE Copper wire same gauge and same turns incl varnishing heating, balancing etc from short travel/ long travel mechanism and refixing the same by replacing bearing, varnishing etc completed all as specified and directed by Engineer-in-Charge

Material for repairing to long travel shaft by replacing pedstal bearing 06 Nos, including machining work replacing nut, bolts ,washers etc completed all as specified and directed by Engineer-in-Charge Note:- Pedastal Bearing is measured and paid separately under relevant item of this BOQ

Material for repair to brake system completely by replacing brake shoe , rotor , brake liner , spring for long travel, short travel, updown mechanism etc completed all as specified and directed by Engineer-in-Charge Note:- Break shoes is measured and Paid Separately under relevant item of this BOQ

Repairs to guide wheel 4 Nos for long Travels by replacing gun metal filling , reboring and machine work with in tolerance limit etc completed all as specified and directed by Engineer-in-Charge

Material for periodical maint of oil fired incinerator of Make : HAAT Model GD-3once in three month which includes the following works etc completed all as specified and directed by Engineer-in-Charge (a) Descalling of Gap between greads (b) Descalling of combution Chamber (c ) Descalling of arch chamber (d) Descalling of stack arrester. (e ) Overhauling burner nozzel blast tube pump, diffuser etc (f) Cleaning of Diesel tank and fuel lines Note:- (i)Rate Includes for painting on Diesel Tank and writing in White Paint Date of Cleaning and capacity. (ii) contractor shuld attend day day complaint of Incenarator regularly and maintenance shall be carried out accordingly for smooth functioning and the cost for the same shall be deemed to be include in the above quoted rates.(iII) Parts are measured and Paid separately under relevant item of this BOQ

Supply Only following Parts :-

(a) Ignition electrode, Cat Part No-HTT09/83

(b) Ignition Transformer 200-6000Volt, Cat Part No-HTT09/83

© Diffuser plate, Cat Part No-HTT06/83

(d) Solenoid Valve Cat Part No-VAL 0029/5

(e ) Fuel Pump Assembly Cat Part No-HT001/9

(f) Fuel Suction Filter assembly, Cat Part No-HA2/3

(g) Combution Blower Cat No-HTT 11/83

(h) Solenoid coil for combution blower, Cat Part No-VA-0320/9

(j) Sequence Controller, Cat Part No-HTT 22/G3

M & L for periodical maint of washing Machine and Dryer DER-30 and Dryer Thumbler once in three month which includes the following works. (a) Descalling of drying chamber by descalling solution MAC (b) Oiling , Greasing of bearing of moters and shaft (c ) Laying and tighting of panel wiring with proper thinbles/ PVC Clampr (d) Overhauling of washing machine Chamber Note:- (i)Rate Includes for writing in White Paint Date of Cleaning and capacity. (ii) contractor shuld attend day day complaint of Machine regularly and maintenance shall be carried out accordingly for smooth functioning and the cost for the same shall be deemed to be include in the above quoted rates.(iII) Parts are measured and Paid separately under relevant item of this BOQ

Supply Only following Parts :-

a) V Belt size A-69

b) HRC Fuse up to 32 Amps

d) Hose pipe for Drain 1.2 Mtr Length

e) Water Solinied Valve 1''

f) Conatctor 3 Phase 63 Amps for starter of main drive moter

g) Heating Contactor

j) Electric heater

k) Idler Shaft

l) sequence Ciontroler

m) ignition Transformer

n) Air Filter Cum Regulator

O) Single Phase Prevainter

p) Drying Thumbler timer

Q) Tension Spring

r) Breaking contactor

M & L for rewinding of 3 Phase electric motor including varnishing of washing machine main drive 3 HP incl taking down and reinstalling at site incl connecting electric point and commissioning complete al as specified.

M & L for periodical maint of Air Compressor once in three month which includes the following works. (03 Nos of Air Compressor) (a) Checking the compressed air pipe for leakage. (b) Checking of V belt and repair and replace it © Oil, Greasing of bearing of moters and shaft (d) Checking of pressure valve switch for automatic control of compressor. e) Checking of non return valve of compressor and if damage repair it. f) Overhauling of compressor moter g) Tighting and cheking of panelwiring with proper thimble (h) Painting of Air compressor with with synthetic enamel paint , one coat after cleaning scrubing the surfaces incl wrirting by paint the capacity , marking of fuel level indicator etc complete as directed by Engineer in charge. Note:- (i)Rate Includes for writing in White Paint Date of Cleaning and capacity. (ii) contractor shuld attend day day complaint of Machine regularly and maintenance shall be carried out accordingly for smooth functioning and the cost for the same shall be deemed to be include in the above quoted rates.(iII) Parts are measured and Paid separately under relevant item of this BOQ

Supply Only following Parts :-

a) V Belt suitable for Air compressor to motermain drive Pully

b) Compressed Air Pipe of 10mm Dia of Heavy Duty

c) Head Gas Ket

d) Piston Ring

e) Connecting Rod

f) Oil Seal

S & F DOL Starter of Air Compressor moter Main Drive 3 HP Incl taking down and reinstalling with new starter 415 volt 50 cycle current rating 8 Amps incl connecting to electric point and commissioning etc completed all as specified and directed by Engineer-in-Charge

M & L for repair and replacement of AMF Panel for 160 KVA DG Set make : Greaves

Supply Only for replacement of following Parts :-

(a) AMF Controller

(b) Contactor 4 Pole 415 Volt 225 Amp, Make: L&T/Seimens

(c ) Bty Charger 24 Volt 20 Amp

(d ) Digital multifunctional meter for freq, Amp, Voltage, KWH

(f) Voltage Monitoring relay

M & L for periodical maint of car washing point once in three month which includes the following works. (03 Nos of car washer motor) (a) Checking the motor in regular basis. b) winding of motor Note:- (i) contractor shuld attend day day complaint of Machine regularly and maintenance shall be carried out accordingly for smooth functioning and the cost for the same shall be deemed to be include in the above quoted rates.(iII) Parts are measured and Paid separately under relevant item of this BOq

M& L for repairing of 100 KVA DG Panel (Make: Ashok Leyland) by repacing necessary electric items such as MCB, Contactor etc and rewiring all the connnections and also replace electronic panel showing parameters i.e Oil Pressure, Water Temp, RPM, Frequency, Volt Amp, starting switch etc completed all as specified and directed by Engineer-in-Charge

Material and labour for replacement of unserviceable battery 12 V, 92 AH with maintenance free battery 12 Volt initially charged etc completed all as specified and directed by Engineer-in-Charge Make - Exide

Supply and fixing in existing panel board for replacement MCCB, 4 Pole, 63 Amps , with breaking capacity 16 KA , fixed type and connecting etc complete all as specified and directed by Engineer-in-Charge MAKE: Legrand or its equvalent.in makes mentioned in list of makes in Appendix `C'

Supply and fixing in existing panel board for replacement MCCB, 4 Pole, 100 Amps , with breaking capacity 25 KA , fixed type and connecting etc complete all as specified and directed by Engineer-in-Charge MAKE: Legrand or its equvalent.in makes mentioned in list of makes in Appendix `C'

Material and labour for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick, buried vertically in ground (Each pit not less than 2.25 mtrs deep below normal ground level with top edge of plate not less than 1.50 M below normal ground level) connected to GI strip 32 x 6 mm , by means of bolts, nuts, and check nuts and washers etc encased in GI protection pipe 40 mm dia light grade pipe for protection of GI earth strip both to be provided to the extet of 7.5 meters, all as shown on electrical plate No 3 of MES SSR - 2004 Part - I, GI protection pipe buried in ground, laid under floors / plinths or mixed on walls / pole etc or concealed in walls etc; with provision of mixture of charcoal dust and common salt packed upto minimum 150 mm all around the earth plate, including PCC 1:2:4 type B-1 earth pit with M.S angle iron frame, cast iron cover with locking arrangement, with GI 20 mm dia medium grade pipe and MS funnel with wire mesh for watering arrangement, including necessary excavation and earth work in any type of soil / strata and testing on completion etc complete all as specified and directed by Engineer-in-Charge Note:- i) Cost of GI strip 32 x 6 mm and protection pipe 40 mm dia is deemmed to be included in rate quoted ii) Excavation and returning filling of Soil any type is deemed to be included in rates.

An amount of Rs 51,950.00 shall be deducted from BOQ on account of schedule of credit

ASHWAMEDH ENGINEERS

shakti engineering and electrical works

Maruti Abhiyantriki