repairs to wooden and steel furniture items including bed hard charpoy ip hard top at navy and coast guard stations under ge navy lakshadweep

Amount

Repairs To Sofa Set 4/5 seater( FD-281) by Removing of worn out upholstery together with U Foam, Supplying and fixing new U- foam cushion (ISI Marked) 40 Density of size as per Drg including long cloth lining inside and new tapestry cloth cover as per sample of approved shade duly stitched and provided with nylon zip. The cost of tapestry shall not be less than Rs 360/- per running mtr. Note:-(Each cushion with tapestry cover shall be measured and paid as one unit) Make of foam cushion:-Sleepwell/Dunlop/Featherlite/Kurlon. Make of Tapestry cloth:-Dedecor/Raymonds/Bombay Dyeing.

Repairs To sofa set 4/5 seater( FD-281) by Removing the existing broken/damaged arms and S&F new arms of existing size and shape, made out of well seasoned first class teak wood, including polishing to glossy finish,etc complete,all as directed and shown on Drg. Note:-(i)Each arm will be measured and paid as one unit. (ii)Tightening of sofa frame wherever required shall be deemed to be included in the rate quoted. Make of polish:-Sheenlac/Tower/Naidu.

Repairs To sofa set 4/5 seater( FD-281) by Removing the existing broken/damaged legs and S&F new legs of existing size and shape, made out of well seasoned first class teak wood, including polishing to glossy finish,etc complete,all as directed and shown on Drg. Note:-(i)Each leg will be measured and paid as one unit. (ii)Tightening of sofa frame wherever required shall be deemed to be included in the rate quoted. Make of polish:-Shenlac/Tower/Naidu.

Repairs To Sofa Set single Seater (FD-281/373) by Removing the existing broken/damaged front and rear rails and S&F new long rails of single seater sofa of existing size and shape, made out of well seasoned first class teak wood, including polishing to glossy finish,etc complete,all as directed and shown on Drg. Note:-(i)Each rail will be measured and paid as one unit. (ii)Tightening of sofa frame wherever required shall be deemed to be included in the rate quoted. Make of polish:-Shenlac/Tower/Naidu.

Repairs to sofa set 4/5 seater( FD-281) by Removing the existing broken/damaged battens and S&F new battens ofexisting size and shape, made out of well seasoned first class teak wood, including polishing to glossy finish,etc complete,all as directed and shown on Drg. Note:-(i)Each batten will be measured and paid as one unit. (ii)Tightening of sofa frame wherever required shall be deemed to be included in the rate quoted. Make of polish:-Shenlac/Tower/Naidu.

Prepare the existing surface of wooden furniture of any description by applying sand paper, removing the stains and filling the bore holes, cracks by putting bees wax and chalk powder etc, and apply french polish to the exposed surface. Polishing shall be uniform and shall be glossy finish for sofa set FD-281complete all as directed by Engr-in-Charge.

Removing of worn out tapestry cloth and supply of new tapestry cloth for cushions of 40 D size as per existing pattern duly stitched along with zip facility .Tapestry cover shall be approved by Engg-in-Charge. The cost of tapestry shall not be less than Rs 360/- per running mtr.

Removing of old unserviceable plastic cane of chair dining (FD-16(M)/228/279), Chair easy (FD-17(M)/201/229), Chair writing(FD-20(M)/202 /250/280), and recaning with approved quality cane plastic 2mm/3mm/4mm, after tightning the loose chairs/stool and french polishing to the structures of chair all as specified and as directed by Engineer-in-Charge. Make of cane plastic : Godrej/Maharastra plastic.

Repairs to Chair Dining by removing the Side rail of seat frame unserviceable wooden members and providing new first class hard wood (teak) members, including french polishing and as shown on drg(FD-228/279)complete all as specified and as directed .

All as per item No. 9 here in before but Rear Rail of Seat frame.

All as per item No. 9 here in before but Front Rail of Seat frame

All as per item No. 9 here in before but Front Leg

All as per item No. 9 here in before but Rear leg

All as per item No. 9 here in before but bottom Stiffner (Seat) Note:- Three Nos of stiffners measured as one unit

All as per item No. 9 here in before but Stiffner (Centre) Note:- Three Nos of stiffners measured as one unit

Repairs to Chair Writing by removing Side Rail of Seat Frame and providing new first class hard wood (teak) members, including french polishing and as shown on drg(FD-250/280)complete all as specified and as directed .

All as per item No. 16 here in before but Rear Rail of Seat frame

All as per item No. 16 here in before but Front Rail of Seat frame

All as per item No. 16 here in before but Front Leg

All as per item No. 16 here in before but Rear leg

All as per item No. 16 here in before but Back Rest

All as per item No. 16 here in before but Arm rest stiffner

All as per item No. 16 here in before but bottom Stiffner (Seat). Note:- Three Nos of stiffners measured as one unit

Repairs to Chair Easy by removing the Side rail of seat frame and providing new first class hard wood (teak) members, including french polishing and as shown on drawing(FD-229) complete all as specified and as directed .

All as per item No. 24 here in before but Rear Rail of Seat frame

All as per item No. 24 here in before but Front Rail of Seat frame

All as per item No. 24 here in before but Front Leg

All as per item No. 24 here in before but Rear leg

All as per item No. 24 here in before but Arm Rest

All as per item No. 24 here in before but Side Rail of Back Rest

All as per item No. 24 here in before but Upper Rail of Back Rest

All as per item No. 24 here in before but Lower Rail of Back Rest

Repairs to table dinning 8 persons (FD 273) by Removing the existing unserviceable damaged top and tightining of the frame including S&F top with a new prelaminated particle board 18mm thick, ISI mark with 4mm thick teak wood edging all round complete all as specified and shown on drgs. Make of particle board: Bhutan Bd/Novapan/Eco BD.

Repairs to table dinning 8 persons (FD 273) by Removing UNSV legs and S&F new legs of existing size made to shape from well seasoned first class teak wood duly polished as specified on drg and as directed by Engr-in-Charge.

Repairs to table dinning 8 persons (FD 273) by Removing UNSV long rail and S&F new long rail of existing size made to shape from well seasoned first class teak wood duly polished as specified on drg and as directed by Engr-in-Charge.

Repairs to table dinning 8 persons (FD 273) by Removing UNSV short rail and S&F new short rail of existing size made to shape from well seasoned first class teak wood duly polished as specified on drg and as directed by Engr-in-Charge.

Repairs to table dinning 8 persons (FD 273) by Removing UNSV wooden corner bracket and S&F new bracket of existing size made to shape from well seasoned first class teak wood duly polished as specified on drg and as directed by Engr-in-Charge.

Repairs to Table Bedside by removing the damaged sides and providing new sides made out of 18mm thick prelaminated particle board and providing new members, including french polishing to the structure of Table Bedside and as shown on drawing (FD/E6/MAP/15(R)) complete all as specified and as directed .

All as per item No.38 here in before but Back made out of 12mm thick commercial plywood

All as per item No. 38 here in before but Top / Shelves made out of 12mm thick prelaminated particle board

All as per item No. 38 here in before but Knobs

Repair to peg table (FD 384/277) by Removing the existing unserviceable top and tightning of the frame and S&F new top of prelaminated particle board 18mm ISI mark with 4mm thick teak wood edging all round all as specified and shown on drgs. Make of BD: Bhutan Bd/Novapan/Eco BD.

Repairs to peg table (FD 384/277) by Removing UNSV legs and S&F new legs of existing size made to shape from well seasoned first class teak wood duly polished as specified on drg and as directed by Engr-in-Charge.

Repairs to peg table (FD 384/277) by Removing UNSV long rail and S&F new long rail of existing size made to shape from well seasoned first class teak wood duly polished as specified on drg and as directed by Engr-in-Charge.

Repairs to peg table (FD 384/277) by Removing UNSV short rail and S&F new short rail of existing size made to shape from well seasoned first class teak wood duly polished as specified on drg and as directed by Engr-in-Charge.

Repairs to Table 900x600x760mm with drawer by Removing the existing unserviceable table top and S&F new top of prelaminated particle board 18mm thick, ISI mark with 4mm thick teak wood edging all round as shown on drawing (FD-283) complete all as specified and as directed. Make of BD: Bhutan Bd/Novapan/Eco BD. .

Repairs to table (FD-283) by Removing UNSV legs and S&F new legs of existing size made to shape from well seasoned first class teak wood duly polished as specified on drg and as directed by Engr-in-Charge.

Repairs to table by Removing UNSV long rail and S&F new long rail of existing size made to shape from well seasoned first class teak wood duly polished as specified on drg and as directed by Engr-in-Charge.

Repairs to table by Removing UNSV short rail and S&F new short rail of existing size made to shape from well seasoned first class teak wood duly polished as specified on drg and as directed by Engr-in-Charge.

Repair and replacement of new drawer of table made to shape and size, front/Back and both sides shall be well sesaned teak wood duly polished with 1 No. knob as per drg and as directed by Engr-in-Charge.

Repairs to table center (FD 274) by Removing the existing unserviceable table top and tightning of the frame and S&F new top of prelaminated particle board 18mm ISI mark with 4mm thick teak wood edging all round all as specified and shown on drgs.Make of BD: Bhutan Bd/Novapan/Eco BD.

Repairs to table center (FD 274) by Removing UNSV legs from table and S&F new legs of existing size made to shape from well seasoned first class teak wood duly polished as specified on drg and as directed by Engr-in-Charge.

Repairs to table center (FD 274) by Removing UNSV long rail from table and S&F new long rail of existing size made to shape from well seasoned first class teak wood duly polished as specified on drg and as directed by Engr-in-Charge.

Repairs to table center (FD 274) by Removing UNSV short rail from table and S&F new short rail of existing size made to shape from well seasoned first class teak wood duly polished as specified on drg and as directed by Engr-in-Charge.

Repairs to Table Writing by removing the legs for Table and providing new members of first class hard wood (teak), including french polishing and as shown on drg(/FD-280/275) complete all as specified and as directed .

All as per item No.55 here in before but Removing the U/S long rail from table and S&F new top long rail of seasoned teak wood duly polished glossy finish as shown on drg

All as per item No. 55 here in before but Removing the U/S short rail from table and S&F new top short rail of seasoned teak wood duly polished glossy finish as shown on drg

All as per item No.55 here in before but Removing the U/S stiffner from table and S&F of new stiffner of seasoned teak wood duly polished glossy finish as shown on drg

All as per item No.55 here in before but Removing the U/S top from table and tightining of frame and S&F of new top of Table writing with 18mm thick pre laminated partical board ISI Marked . Edge should covered with 6mm thick teak wood beading duly polished. Make : Bhutan Bd/Novapan/Eco Bd

All as per item No.55 here in before but Removing the U/S drawer from table and replacement of drawer of table writing made to shape and size, front/Back and both side of the drawer shall be 18mm thick seasoned 2nd class hard wood (teak) duly fitted with 1 Nos knob as per drg and as directed by Engr-in-Charge.

All as per item No.55 here in before but Removing the U/S Prelaminated particle board /ply from table and S&F of pre laminated particle board 18mm thick to the front and sides and 4mm thick teak BWR plywood to the rear side of the table duly ISI Marked and polished as directed by Engr-in-Charge. Make of plywood: Kitply/Eco Bd/Century Ply. Make of BD: Bhutan Bd/Novapan/Eco BD.

All as per item No.55 here in before but Removing the U/S shutter from table and replacement of new shutter of table writing to be made of 18mm thick preleaminated particle board ISI Marked, Edges should be covered with 4mm thich teak wood beading, fixed with 18" long piano type hinges and one knob to be provided as per drg.Make of BD: Bhutan Bd/Novapan/Eco BD.

Repairs to Bed Hard (Steel) without MNF(FD/E6/MAP/08( R) by Removing Dents and Bends and welding wherever required for Bed Hard(Steel) and Scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosal spray.Preperation of bed surfaces after applying putty and red oxide primer and spray painting of bed hard with two coats of synthetic enamel paint .Colour :-Black . and as directed by Engg-in-Charge . Make for paint:-Berger/Nerolac . Note :-Bed Hard(Steel) as a whole shall be measured as single unit.

All as per item No.63 here in before but Removing existing unserviceable plywood and S&F of 12 mm thick commercial plywood BWR grade and with ISI mark conforming to IS 303 specification for Bed Hard(Steel) of size as per drawing and as directed by Engg-in-Charge. Make for plywood :Century/Archid Ply / Kitply/Green Ply/Duroply.

Repairs to Chair CB steel with Arms (FD 75M) by Removing the existing unsv seat from chair () and S&F new seat frame out of seasoned, first class hard wood teak, providing caning holes at 12.5 mm centre to centre, as shown on drawing duly painted black with synthetic enamel paint first quality, and canning/ weaving with not less than 1.8mm width plastic cane and 3mm width cane for border. Seat shall be fixed to frame with suitable bolts & nuts as per drg and as directed by Engr-in-charge. Note:- (i) Each seat shall be measured as one unit. (ii) The unit rate quoted shall be deemed to include for caning. Make for paint :- Asian Make for cane :- Maharastra plastic

All as per item No.65 here in before but but back frame of chair.

All as per item No.65 here in before Removing existing unsv teak wood arm from the chair and S&F new first class teak wood Arms made to shape and size as shown on drawing, duly polished, glossy finish etc complete all as directed Note :- Each arm shall be measured as one unit.

Repairs to Chair CB steel without Arms (FD-75M) by Removing the existing unsv seat from chair and S&F new seat frame made out of seasoned first class hard wood teak, polished with french polish, glossy finish and canning/ weaving with not less than 1.8mm width plastic cane and 3mm width for bordering . Providing Caning holes at 12.5 mm centre to centre. The seat frame shall be fixed with suitable bolts & nuts etc complete all as directed. Note:- (i) Each seat shall be measured as one unit. (ii) The unit rate quoted shall deemed to including for canning. Make for polish :- Shenlac/ Tower. Make for cane :- Maharastra plastic

All as per item No.68 above but back frame of chair.

Repairs to Almirah Large Steel (FD-1031) by Removing Dents and Bends and welding wherever required, Scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosal spray.Preperation of almirah surfaces after applying putty and red oxide primer and spray painting of almirah with two coats of synthetic enamel paint . Colour :- Royal blue/airforce blue colour for entire almirah and half white colour for doors (front side). As per sample kept in BSO office and as directed by Engg-in-Charge .Make for paint:- Asian/Berger/Nerolac Note :-Almirah as a whole shall be measured as single unit.

Repairs to Almirah Large Steel (FD-1031) by Removing the existing U/S damaged shelf and S & F shelf made out of MS sheet, 1 mm thick, bent to shape as required, welding, etc including preparing the new steel and iron surfaces and applying, two coats of Synthetic enamel paint as specified in Sl No 01 , over a coat of red oxide primer complete all as directed By Engg-in-charge Note:- Each shelf will be measured as one unit. Make for sheet :- Rinl /Sail / Tisco.Make for paint:- Asian/Berger/Nerolac

Repairs to Almirah Medium Steel (FD-1032) by Removing Dents and Bends and welding wherever required, Scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosal spray.Preperation of almirah surfaces after applying putty and red oxide primer and spray painting of almirah with two coats of synthetic enamel paint . Colour :- Royal blue/airforce blue colour for entire almirah and half white colour for doors (front side). As per sample kept in BSO office and as directed by Engg-in-Charge . Make for paint:- Asian/Berger/Nerolac Note :-Almirah as a whole shall be measured as single unit.

Repairs to Almirah Medium Steel (FD-1032) by Removing the existing U/S damaged shelf and S & F shelf made out of MS sheet, 1 mm thick, bent to shape as required, welding, etc including preparing the new steel and iron surfaces and applying, two coats of Synthetic enamel paint as specified in Sl No 01 , over a coat of red oxide primer complete all as directed By Engg-in-charge Note:- Each shelf will be measured as one unit. Make for sheet :- Rinl /Sail / Tisco.Make for paint:- Asian/Berger/Nerolac

Repairs to Almirah by Removing the unserviceable locks from Almirah and S&F new steel locks (6 lever brass) for Almirah large/Med steel of approved quality with duplicate keys all as directed by Engg-in-charge Make :-Godrej/Sheel/Harrison

Removing and replacing unserviceable handle with new 100 mm chromium plated handle of approved quality for Almirah large/Med steel all as directed by Engr-in-charge. Make : Godrej/Sheel

Repairs to Book Case Steel (FD-1028) by Removing the steel shutters and refixing the same after repair of dents and bents including sliding arrangements for book case all as directed. Note:- Each shutter shall be measured as one unit.

Repairs to Book Case Steel (FD-1028) by Removing and replacing the broken glass with 3mm thick new plain glass sheet shall be provided for shutter with proper packing to avoid loose fittings, including beading of first class hard wood teak, 6 mm thick, duly polished, glossy finish, for one shutter for book case steel all as directed. Make of Glass:- Modigurd / Saintgobain / Triveni / Pilkington.

Repairs to Book Case Steel (FD-1028) by Removing and replacing unserviceable handle with new bow handle of 75mm size steel chromium plated with suitable screws all as directed for one shutter of book case steel.

Repairs to Book Case Steel (FD-1028) by Removing the unserviceable locks and S&F new steel lock (6 lever brass) of approved quality with duplicate keys complete all as directed. Make : Godrej/Sheel/Harrison

Repairs to Table Office Officer/Clerk Steel (FD-1003/1004) by Removing the UNSV drawer from table and supply and fix new drawer made out of 1mm thick MS sheet made to shape, welding etc, including preparing the new steel and iron surfaces and applying, two coats of smoke grey synthetic enamel paint, first quality, over a coat of red oxide primer all as per drg and as directed by Engr-in-Charge.Note:- Each drawer will be measured as one unit. Make for sheet :- Sail /Rinl/Tisco Make for Paint/Asian/berger/Nerolac

Repairs to Table Office Officer/Clerk Steel (FD-1003/1004) by Removing the unserviceable locks and S&F new steel lock (6 lever brass) of approved quality with duplicate keys all as directed by Engr-in-charge for table office officer/table office clerk steel. Make : Godrej /Sheel/Harrison

Repairs to Table Office Clerk Steel (FD-1003/1004) by Removing the existing unsv table tops of table office clerk steel and S&F new table top with 18mm thick pre-laminated particle board, with one face decorative laminate and other balancing white, exterior grade, ISI Marked, duly fixed with 20 /19mmx 4mm thick teak wood, half round beading, duly polished, glossy finish, all round, etc complete, all as directed all as directed. Make : Eco Bd /Bhutan Bd/Novapan/Anchor

Repairs to Table Office Officer Steel (FD-1003/1004) by Removing the existing unsv table tops of table officer steel and S&F new table top with 18mm thick pre-laminated particle board, with one face decorative laminate and other balancing white, exterior grade, ISI Marked, duly fixed with 20 /19mmx 4mm thick teak wood, half round beading, duly polished, glossy finish, all round, etc complete, all as directed all as directed. Make : Eco Bd /Bhutan Bd/Novapan/Anchor

Repairs to Table Computer (FD/E6/MAP/03) by Removing unserviceable/ worn out components of Table Top and S&F the required Top along with appropriate new screws 'L' clamps and new component with beading as per the existing, 18 mm thick pre-laminated particle board, exterior grade,both side lamination, (Shade as that of component removed) and all cut ends of laminated sheet to be sealed by laminated beading as directed by Engg-in-Charge Make: . Anchor / Eco board / Bhutan Board / Archid board .

All as per item No. 84.00 above but sides of table.

All as per item No. 84.00.above but key board of table.

All as per item No.84.00 above but bottom of table.

All as per item No.84.00 above but drawer of table.

All as per item No.84.00 above but Removing unserviceable /worn out key board & drawer MS telescopic channel supply and fix new MS telescopic channel with appropriate screws and all as directed by Engg-in-Charge

All as per item No.84.00 above but Removing unserviceable /worn out lock from the drawer of table and supply and fix new brass lock to match the original all as directed by Engg-in-Charge

Removing the old existing paint and Preparing the old painted surfaces for Almirah large with shelves steel FD-1031 by sand paper and removing dents and bents and filling with putty (metal paste) painting with smoke grey colour synthetic enamel paint one coat glossy finish all as directed by Engr-in-charge

All as per item No. 91 above but Almirah med with shelves steel FD-1032

All as per item No.91 above but, Locker bed side steel FD-1029

R.K. Builders

SHREE SAI LABOUR CONTRACT CO-OPERATIVE SOCIETY LTD

AR Traders