Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.3 LAccepted-AOC 1 SADHANA SOCIETY DEV BAUG DEVBAUG BHAVNAGAR GUJARAT 364001 | BHAVNAGAR | GUJARAT | 364001 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹20.8 L+₹3.6 L (21.0%)Rejected-Finance | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹23.1 L+₹5.9 L (34.3%)Rejected-Finance | L3 | Rejected-Finance NOT BEING LOWEST | |
| 4 | L4₹25.7 L+₹8.6 L (49.8%)Rejected-Finance 1 225 5 6 SADAR BAZAR DELHI CANTT 110010 | NEW DELHI | DELHI | 110010 | L4 | Rejected-Finance NOT BEING LOWEST | |
| 5 | L5₹33.7 L+₹16.5 L (96.2%)Rejected-Finance GALI NO 2 H NO 45 2ND FLOOR NANAK VIHAR COLONY LAL KUAN GHAZIABAD UTTAR PRADESH 201009 | GHAZIABAD | GHAZIABAD | UTTAR PRADESH | 201009 | L5 | Rejected-Finance NOT BEING LOWEST |
| Sl No | Description | Qty | Unit | S.R. Constructions L3 | M/s Krishna Construction Co. L1 | A K ENGINEERING COMPANY L5 | J V ENGINEERS / JAI SINGH L2 | jain associates L6 | M P TYAGI ENGINEERS AND CONTRACTORS L4 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down carefully copper/aluminium point wiring from wooden battan or conduits (light, fan, socket or power) complete including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc. to be measured separately) and making good disturbed surfaces of walls, floor etc. | 731 | Per point | 2 ₹1,462 Lowest | 7 ₹5,117 | 65 ₹47,515 | 19 ₹13,889 | 25 ₹18,275 | 19 ₹13,889 |
| 2.00M&L point wiring with PVC insulated FRLS 1100 Volts sheathed cable 1.5 Sqmm multistranded copper conductor two run and drawing in & including rigid PVC conduit in walls and on surface conduit for Beam/Ceiling/Column portion FRLS grade terminal box of suitable thickness and with 3 mm thick hylam sheet cover as per required cutting for terminal boxes also including provision of earth wire PVC insulated FRLS 1100 Volts sheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly and making good to the disturb surfaces with cement all as specified for the following :- Note :- Point wiring drawn in existing conduit/PVC concealed conduit/as per site requirement all as specified and directed. | |||||||||
| 3.00 | (a) One light/fan/bell point controlled by one way switch (switch to be measured and paid separately) | 280 | Per point | 250 ₹70,000 | 199 ₹55,720 Lowest | 700 ₹1,96,000 | 279 ₹78,120 | 400 ₹1,12,000 | 200 ₹56,000 |
| 4.00 | (b) One 3 pin socket outlet 5 Amp independent with insulated stranded copper conductor cable 1.5 Sqmm single core and PVC insulated FRLS 1100 Volts sheathed copper conductor 1.5 Sqmm stranded conductor as earth wire connected to dolly complete ( socket and switches to be measured and paid separately). Note :- Point wiring drawn in existing conduit/PVC concealed conduit/as per site requirement all as specified and directed. | 100 | Per point | 250 ₹25,000 | 199 ₹19,900 Lowest | 700 ₹70,000 | 279 ₹27,900 | 400 ₹40,000 | 200 ₹20,000 |
| 5.00 | (c) -ditto- as above item No 4 but Same board. | 50 | Per point | 50 ₹2,500 Lowest | 59 ₹2,950 | 125 ₹6,250 | 109 ₹5,450 | 200 ₹10,000 | 200 ₹10,000 |
| 6.00 | M&L One power point with insulated stranded copper conductor cable 2.5 Sqmm single core and PVC insulated FRLS 1100 Volts sheathed copper conductor 2.5 Sqmm stranded conductor as earth wire connected to dolly complete ( socket and switches to be measured and paid separately). Note :- Point wiring drawn in existing conduit/PVC concealed conduit/as per site requirement all as specified and directed. | 55 | Per point | 280 ₹15,400 | 249 ₹13,695 Lowest | 850 ₹46,750 | 499 ₹27,445 | 550 ₹30,250 | 300 ₹16,500 |
| 7.00 | M&L for one power point with PVC insulated stranded copper conductor cable 4.00 sqmm single core 1100 volts for one 3 pin AC box outlet, 20 Amp concealed and including provision of 4.0 sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board. | 15 | Per point | 350 ₹5,250 | 299 ₹4,485 Lowest | 1,250 ₹18,750 | 979 ₹14,685 | 750 ₹11,250 | 500 ₹7,500 |
| 8.00 | M&L switch piano flush type 5 Amp SP one way . | 430 | Each | 15 ₹6,450 Lowest | 19 ₹8,170 | 45 ₹19,350 | 24 ₹10,320 | 30 ₹12,900 | 40 ₹17,200 |
| 9.00 | M&L switch piano flush type 15 Amp SP one way. | 55 | Each | 70 ₹3,850 | 29 ₹1,595 Lowest | 75 ₹4,125 | 69 ₹3,795 | 80 ₹4,400 | 100 ₹5,500 |
| 10.00 | M&L socket outlet 3 pin 5 Amp flush type . | 150 | Each | 80 ₹12,000 | 39 ₹5,850 | 80 ₹12,000 | 32 ₹4,800 Lowest | 70 ₹10,500 | 100 ₹15,000 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
21 Jul 2025, 6:00 pmClosed
GE (West) Delhi Cantt-10.
GE (West) Delhi Cantt-10.
Repair/Replacement of internal electric fitting and fixtures, solar water heater and connected items in MD Accn of Piru Vihar and OTMs of AGE BR-III under GE (West) Delhi Cantt-10.
2025_MES_715707_1
GE/DW/TOKEN/52 OF 25-26
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
delhi
Class D Category a(i) or b(i)
9 documents required · 9 mandatory
₹500
GE (West) Delhi Cantt
₹90,000
Yes
10 Sept 2025
20 Jun 2025
23 Jul 2025
20 Jun 2025
21 Jul 2025
7 Jul 2025
Amount
Taking down carefully copper/aluminium point wiring from wooden battan or conduits (light, fan, socket or power) complete including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc. to be measured separately) and making good disturbed surfaces of walls, floor etc.
M&L point wiring with PVC insulated FRLS 1100 Volts sheathed cable 1.5 Sqmm multistranded copper conductor two run and drawing in & including rigid PVC conduit in walls and on surface conduit for Beam/Ceiling/Column portion FRLS grade terminal box of suitable thickness and with 3 mm thick hylam sheet cover as per required cutting for terminal boxes also including provision of earth wire PVC insulated FRLS 1100 Volts sheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly and making good to the disturb surfaces with cement all as specified for the following :- Note :- Point wiring drawn in existing conduit/PVC concealed conduit/as per site requirement all as specified and directed.
(a) One light/fan/bell point controlled by one way switch (switch to be measured and paid separately)
(b) One 3 pin socket outlet 5 Amp independent with insulated stranded copper conductor cable 1.5 Sqmm single core and PVC insulated FRLS 1100 Volts sheathed copper conductor 1.5 Sqmm stranded conductor as earth wire connected to dolly complete ( socket and switches to be measured and paid separately). Note :- Point wiring drawn in existing conduit/PVC concealed conduit/as per site requirement all as specified and directed.
(c) -ditto- as above item No 4 but Same board.
M&L One power point with insulated stranded copper conductor cable 2.5 Sqmm single core and PVC insulated FRLS 1100 Volts sheathed copper conductor 2.5 Sqmm stranded conductor as earth wire connected to dolly complete ( socket and switches to be measured and paid separately). Note :- Point wiring drawn in existing conduit/PVC concealed conduit/as per site requirement all as specified and directed.
M&L for one power point with PVC insulated stranded copper conductor cable 4.00 sqmm single core 1100 volts for one 3 pin AC box outlet, 20 Amp concealed and including provision of 4.0 sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board.
M&L switch piano flush type 5 Amp SP one way .
M&L switch piano flush type 15 Amp SP one way.
M&L socket outlet 3 pin 5 Amp flush type .
M&L socket outlet 2 in 1,3 pin 5/15 Amps.
S&F electronic fan regulator 4/5 step connecting complete all as specified. .
M&L bell push,flush type,5 amp.
Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid PVC conduit medium grade ISI Marked and all conduit accessories concealed in wall/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor, fabricated branded modular metal flush box concealed in walls with suitable modular inner and outer plate for housing modular switches, socket outlet and fan regulators etc , all as specified and directed for the followings:- Note: ceiling Light/ Fan points wirings are to be drawn in existing in situ conduits all as directed.
(a) One light/fan/bell point controlled by one way switch (switch to be measured and paid separately)
(b) One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.
(c) One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.
All as per above item No 14. but with cable 2.5 Sqmm size 1100 volts grade for One 3 Pin socket 15A Independent board
Supply and fix switch modular type single pole one way 6 Amps all specified and as directed.
Supply and fix modular switch 16 Amps one module single pole one way.
Supply and fix modular socket 3/5 pin multi purpose 6 Amps flush type .
Supply and fix modular socket multi purpose 2-in-1, 6/16 Amps 2 module.
Supply and fix modular ceiling fan regulator, step type for BLDC ceiling fan of suitable capacity and module complete all as specified and directed.
Supply and fix switch modular type single pole bell push 6 Amps.
Supply & fix modular AC box with 20 Amp SP mini MCB, plastic enclosure & unbreakable heavy duty plug top complete set duly concealed in wall complete all as specified and as directed.
M&L bell ding dong AC,230 volts,single pole.
Dismantling of complete defective Ceiling fan of 1200 mm sweep i.e. down rod with its Canopies, Shackle, Blade, Condenser housing with its rubber bushes, split pins, unscrewing the body parts of Ceiling fan, taking out starter, rotor winding,ball bearing, gun metal bush etc. complete to carry out the following repairs. Notes :- (a) Removing of burnt out fan winding and rewinding of starter winding with suitable size of Copper enamelled wire, ( weight of copper coil shall be same as per dismantled Fan) varnishing heating and testing as per manufactures designed & specifications and as directed by Enge-in-charge. (b) Re-assembling complete Ceiling fan by fixing only serviceable of old/new spare parts (i.e.) rubber bush of shackle and condenser housing, condenser, gun metal bushes,blades, ball bearing, twin twisted Copper cable, down rod assembly with its shackle condenser housing and Canopies & split pins complete all as specified and design to give designed air delivery including greasing, oiling, cleaning outer body & surfaces etc all as directed.
Ditto- all as per Item No. 27 here-in-before but Air ventilation PVC body/ metal body exhaust fan of size 200/250/300/450 mm sweep.
Ditto- all as per Item No. 27 here-in-before but only overhauling of celing fan 1200mm/1400mm by greasing and oiling,replacement of unserviceable/defective components, except rewinding of starter winding complete all as directed.
Note Sl.No.27 : (a) Spare parts found unserviceable/defective will be measured and paid separately under relevant item as Supply and fix in repair .
Supply in Repairs/Replacements of following spare of Ceiling fan 1200mm /1400mm sweep of different make :-
(a) Fan Condenser of capacity 2.5/3.5 mfd, 220 Volts, AC 50 Hz, plastic-casing, two terminal-copper wire, complete all as specified and directed.
(b) Rubber bush for shackle with bolt, nut and lock pin suitable for Ceiling fan 1200mm/1400mm sweep.
(c) Split Pin
(d) Ball bearing of size 6201/6202 as per sample complete all as specified and directed.
(e) Gun metal bush as per sample.
(f) Fan canopy pvc body, white in colour, suitable for existing fan, as per sample and directed.
(g) ceiling fan blade 1200 mm sweep made up of aluminium body having provision of free size monting nuts/screw all as per requirement at site complete all as specified and directed.
M & L for Overhauling/Dismantling of defective/rusted Geyser of 25 Ltr capacity, removing inlet/outlet connections, taking out U/S parts by unscrewing bolts and nuts etc. Checking defects and re-assembling the Geyser after refixing serviceable/new parts & cleaning, dicling and refixing only serviceable items and re-installing the Geyser in suitable place/position and connecting inlet-outlet connections & testing complete, all as specified and directed by Engr-in-charge. Note:(a) Items required for replacement of U/S parts will be measured and paid separately under relevant item of sch "A" ).
Supply in Repairs/Replacements of following spare parts of geyser storage type of different make for capacity 25 ltrs (Make of spare parts shall be of existing make or as per samples as required)
(a) Apparatus assembly duly prewired without heating element and thermostat/thermal cutout.
(b) Indication lamp (Green/Red) as per sample.
(c) Thermostat as per sample.
(d) Heating element 2.0 KW, triangular/circular or as per sample given at site complete all as specified and directed.
(e ) cover outer for Geysers (confirming to IS) suitable for any make/capacity/type of Geysers installed at site duly painted with two quotes with enamel (Deco) paint of colour & shade complete all as specified and directed
(f) stainless Steel inner tank of 25 Ltrs capacity complete all as specified and directed as .
(g) geyser bottom and top cover for Geysers (confirming to IS) suitable for any make/capacity/type of Geysers installed at site duly painted with two quotes with enamel (Deco) paint of colour & shade complete all as specified and directed
(h) geyser SS braided pipe of 12 mm (internal dia) suitable for hot/cold water, 450 mm long with brass nuts and rubber washers complete all as specified and directed.
Taking down DBs,MCBs, Main switch, etc of any make and type from the site and making good to the disturbed surfaces complete all as specified and directed.
M&L in repair MCB distribution board SPN 8 way with 200 Amp rated bus bar double door complete all as specified and directed.
S&F of factory made epoxy polyester powder coated distribution board VTPN MCCB DB 4 way with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with 4 pole MCCB and ELM as incommer and SP MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB including taking down old DBs all as specified.
Supply and fix in repair sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity complete all as specified and directed.
Supply and fixing in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.
(i) SP 5 To 63 AMP
(iii) SPN 40 to 63 AMP
Taking down carefully sub main wiring three single run 6/10 Sqmm of any make and type complete all as directed.
Supply and fix in repair for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including PVC conduit for submain wiring and connection complete including rigid PVC conduit FRLS grade,unsheathed copper conuctor cable of 6 Sqmm size stranded conductor as earthwire complete all as directed.
Supply and fix in repair for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 10 Sqmm in and including PVC conduit for submain wiring and connection complete including rigid PVC conduit FRLS grade, sheathed copper conuctor cable of 10 Sqmm size stranded conductor as earthwire complete all as directed.
Supply and fix in repair MCCB 100 Amps, 4 Pole 415 volts 16 KA 50 HZ complete all as specified and directed.
Supply and fix in repair MCCB 125 Amps, 4 Pole 415 volts 16 KA 50 HZ complete all as specified and directed.
Supply & fix RCBO, 230 Volt, 40 Amp, 30mA, 50Hz with 10 KA short circuit capacity of double door for ensuring protection from leakage current, short circuit & over load complete all as specified and as directed.
M&L in repair of earthing complete with GI steel earth plate electrode 60cm x 60cmx6.0mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 mtrs below level ground, connected to GI strip 32x6mm by means of nuts, bolts checks nuts and washers made of GI earth wire protected by GI pipe 40mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1 using 20mm graded aggregate, pre-cast RCC (1:2:4) type-B, over slab 30cmx30cmx10cm with one lifting handle made of 8mm dia MS bar funnel wire mesh, 20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical plate No 3 of MES schedule Part-I and testing after completion.
Supply and fix in repair copper wind motor, single phase, 240V suitable for PVC fresh air fan of sweep size 225/ 250/300 mm as per sample given at site complete all as specified and directed.
Supply and fix in repair single core PVC insulated cable 1.5 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge.
Supply and fix in repair single core PVC insulated cable 2.5 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge.
Supply and fix in repair single core PVC insulated cable 4.0 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge.
Supply and fix in repair single core PVC insulated cable 6 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge.
Supply & fix in repair PVC insulated flexible cable three core copper conductor of size 1.00 Sqmm ISI marked covered with white colour round insulation complete as specified & directed.
Supply and fix in repair hylum sheets 3 mm thick (ISI marked) of the following sizes :-
(a) Sheet as per sample suitable for mounting one piano switch 5 Amp and one 5 Amp socket dully cut for mounting as above complete all as specified and directed.
(b) Sheet as per sample suitable for mounting one piano switch 15 Amp and one 15 Amp socket dully cut for mounting as above complete all as specified and directed.
(c) Sheet as per sample suitable for mounting three piano switch 5 Amp dully cut for mounting as above complete all as specified and directed.
(d) Sheet as per sample suitable for mounting four piano switch 5 Amp and one 5 Amp socket dully cut for mounting as above complete all as specified and directed.
(e) Sheet as per sample suitable for mounting five piano switch 5 Amp and one 5 Amp socket dully cut for mounting as above complete all as specified and directed.
Supply and fix in repair LED batten luminaire surface mounted 2 feet system wattage of 10 watts and LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed.
Supply and fix in repair LED batten luminaire surface mounted 4 feet system wattage of 20 watts and LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed.
Supply and fix in repair 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, including connecting up with necessary PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete all as specified and directed.
Supply and fix LED Building security light fitting 35 watt 230 volt AC outdoor type with high pressure die cast Aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and diretced.
Supply and fixing LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
Supply and fixing LED smartglow office lighting recessed luminaire 600mm x 600mm, 36 watt, 220 V AC with built PIR occupancy sensor offering flexibility of auto switching off when the space is not occupied complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
Supply & fixing round shape 12 watt 220 volts AC recessed type with high efficiency complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fix in repairs LED bulb of 9 watt (B-22),with lumen >900 lm/W including dully connecting, fixing with all accessories complete all as specified and directed by Engr-in-Charge.
Supply and fix in repair switch piano flush type 5 Amp SP one way complete all as specified and directed.
Supply and fix in repair switch piano flush type 15 Amp SP one way complete all as specified and directed.
Supply and fix in repair socket outlet 3/5 pin 5 Amp flush type complete all as specified and directed.
Supply and fix in repair socket outlet 2 in 1,3 pin 5/15 Amps complete all as specified and directed.
Supply and fix in repair ceiling rose 3 phase PVC polycorbonate,insulated body complete all as specified and directed.
Supply and fix in repair switch type normal electronic fan regulator 5 step complete all as specified and directed.
Supply and fix in repair bell ding dong AC,230 volts,single pole complete all as specified and directed.
M/L in repair of lamp holder 240 volt AC PVC/Polycarbonte type with back plate ISI marked complete all as directed.
Supply and fix in repair 15A plug top 240 Volt AC and connection complete all as specified and as directed
Supply and fix in repair of SS combined 15 amp without Box complete all as specified and directed by Engr-in-charge
Supply and fix in repair of SS combined 15 amp with Box complete all as specified and directed by Engr-in-charge
Supply and fix in repair of SS combined 5 amp without Box complete all as specified and directed by Engr-in-charge
Supply and fix in repair of SS combined 5 amp with Box complete all as specified and directed by Engr-in-charge
Supply and fix in repair ceiling fan capacitor for 1200/1400 mm sweep 2.5 mfd all specfied and directed
M&L for taking down,refixing & repair of BLDC ceiling fans of any type and make complete including repair/replacement of PCB & ball bearing as per requirement and provisions of new nuts and pins for 1200 mm sweep as per site requirement complete all as specified and directed.
Supply & fix in repair exhaust fan body,frame & blade metallic type of any size 250/300/450 mm sweep with legs, nuts & bolts, fastners complete for mounting as per site requirement complete all as specified & directed.
Supply and fix in repair copper wind motor, single phase, 240V suitable for metallic heavy duty exhaust fan of sweep size 300/450 mm as per sample given at site complete all as specified and directed.
Supply & fixing round shape 15 watt 220 volts AC recessed type with high efficiency complete with drivers, holders, LED lamp suitable fro roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F in repair post top lantern LED type 20 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified & directed.
S&F of LED flood light 70 watt 230 Volt AC outdoor type with thermal management in multiple optics & equipped with IP 66 protection, with impact and corrosion resistant complete with driver & lamp complete all as specified & directed.
S&F of LED flood light 100 watt 230 Volt AC outdoor type with thermal management in multiple optics & equipped with IP 66 protection, with impact and corrosion resistant complete with driver & lamp complete all as specified & directed.
Supply & fix in repair metal sunken box of the following sizes :-
(i) Box as per sample suitable for mounting one piano switch 5 Amp and one 5 Amp socket duly cut for mounting all as per sample complete all as specified & directed.
(ii) Box as per sample suitable for mounting one piano switch 15 Amp and one 15 Amp socket duly cut for mounting all as per sample complete all as specified & directed.
(iii) Box as per sample suitable for mounting five piano switch 5 Amp and one 5 Amp socket duly cut for mounting all as per sample complete all as specified & directed.
M&L for servicing, descaling with descaling agents (chemical solvents) for removing all silt/rust of the solar water heater 500/1000 LPD capacity solar water heating system and making good any leakages, replacement of gaskets etc testing complete and making the plant functional including replacement of minor spares parts for complete system (rubber gaskets , flange dummy, flange brass, hose clamps of suitable sizes, descaling agent, glass rubber beedings etc.,) complete all as specified and directed. Note: Rates of minor spares are deemed to be included in quoted rate.
Ditto- all as per Item No. 83 here-in-before but solar water heater of capacity 100/125/200 LPD.
S & F in repair copper heating element for solar water system, 3kW, embedded copper, sheathed tubular with theremostat as per site requirement complete all as specified and directed.
Supply & Fix in Repair toughened glass of thickness 4mm suitable for solar hot water system, complete all as specified and directed.
M&L for cylindrical type hot water tank of capacity 1000 ltrs per day made of stainless steel sheet 1mm thick including insulation with PUF 50mm thick of 40 kg/cum density covered with SS 304 stainless steel cladding with 1mm thick sheet incl taking down old unsv tank complete all as specified and directed.
Supply & Fix in Repair hose pipe (EPDM) size 25mm inner dia and 36mm outer dia suitable for solar hot water system complete all as specified and directed.
Supply & Fix in Repair temparature gauge ISI marked dial type having range 0 to 100 ºC complete all as specified and directed.
Supply & Fix in Repair water make up tank of 15 ltrs capacity made of 1.6mm thick mild steel sheet, painting 2 coats of synthetic enamel paint surface & inner surface shall be painted with 02 coat of black bituminous paint complete all as specified and directed.
M&L for lagging to hot water pipes all round with nitryl rubber insulation 9mm thick with 26 SWG aluminium cladding system for open surface 15/20/25 mm bore pipe on roofs/walls of single/multistorey bldgs, complete incl taking down unsv one complete all as specified and directed.
Supply & Fix in Repair solar plate collector flat type of capacity 100/125/500/1000 LPD, including glass cover plate, aluminium collector housing, absorber, copper tubes, suitable insulation complete all as specified and directed.
M&L for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as required of capacity 500 ltrs including making inlet and outlet pipe connection and all accessories along with one PVC 20 mm bore float valve incl taking down old unsv one, complete all as specified and directed.
S & F in repair 25 mm Gun-metal gate valves,with iron wheelhead, screwed both ends for iron pipe and fixed complete all as specified and directed.
S & F in repair 20 mm Gun-metal gate valves,with iron wheelhead, screwed both ends for iron pipe and fixed complete all as specified and directed.
S & F in repair 3 layer 15/16 mm nominal dia Hot PP-R polypropylene random copolymer pipes SDR 7.4 UV stabilsed and antimicrobial welded having thermal stability for hot & cold water suppy including all PP-R plain & brass threaded polypropylene random fittings fixed complete to wall, ceiling or in floors etc. with all fitiings like socket, reducer,bend etc.fixed complete all as specified and directed
Supply and fix in repair sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity complete all as specified and directed.
M&L for galvanised steel (Gl) tubing medium grade 25 mm bore with screwed socket joints, together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions, etc.), fixed complete to walls and ceiling or laid in floors including making connection with existing pipeline incl taking down old unsv one complete all as specified and directed.
M&L for galvanised steel (Gl) tubing medium grade 20 mm bore with screwed socket joints, together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions, etc.), fixed complete to walls and ceiling or laid in floors including making connection with existing pipeline incl taking down old unsv one complete all as specified and directed.
S & F in repair 15 mm PP-R Stop/ball valves, including fixing to pipeline as per site requirement, complete all as specified and directed.
Supply & Fix in Repair PVC ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball, ISI marked, 15mm bore complete assembly screwed for iron pipe and fixed, complete all specified and directed.
Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, of size 10.00 sqmm served with inner sheathing of PVC tape and overall PVC sheathed in service connections, one twin core cable flat or circular, complete including connection all as specified and directed.
J V ENGINEERS / JAI SINGH (BID ID -3358554)
S.R. Constructions (BID ID -3358310)
M P TYAGI ENGINEERS AND CONTRACTORS (BID ID -3366560)
A K ENGINEERING COMPANY (BID ID -3358245)
jain associates (BID ID -3356310)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .