8942 PROVN OF CERTAIN MINOR WORKS AT AFMSD KANDIVALI AND COD MALAD AND PROVN OF WATER TANK WITH STAGING AT HBTC MARVE UNDER GE NORTH MUMBAI

Amount

Excavation in trenches, not exceeding 1.50 m wide and not exceeding 1.5 m in depth, for foundation, cable trenches etc, not exceeding 10 sqm on plan and getting out hard/dense soil complete all as specified and as directed by Engineer-in-Charge.

Material and labour for plain cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and as directed by Engineer-in-Charge.

Material and labour for brick work with sub class "B" bricks straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 10 mm thick plastering in cement mortar (1:6) on fair faces of brick work and concrete surface and finishing the surface even & smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of newly plastered wall surfaces and applying two coats of cement based paint complete all as specified and as directed by Engineer-in-Charge. Make : Snowcem/Duracem/Aquacem/Berger/Shalimar

Rough excavation not exceeding 1.5 m deep and getting out in any type of soil all as specified and as directed by Engineer-in-Charge.

Material and labour for hardcore broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface at transformer yard complete all as specified and directed by Engineer-in-Charge.

Material and labour for plain cement concrete 1:4:8 type D-2 using 100mm thick using 40mm graded stone aggregate as in sub base complete all as specified and as directed by Engineer-in-Charge.

Material and labour for machine cut Kota stone slab flooring 20-25 mm thick over and including cement screed bed 20 mm in cement mortar (1:4) base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming in layer not exceeding 25cm in soil complete all as specified and as directed by Engineer-in-Charge.

Removing excavated material to a distance exceeding 1.5 Km but not exceeding 5 Km and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Providing precast cement concrete louvers and jallies, type-B0, 35mm thick (measured solid),including all mouldings, set in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

Supply and fix granite (mushroom granite) tiles 20mm thick, machine cut, work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of mushroom granite stone including necessary moulding of edges as required at site including grinding and polishing over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-Charge.

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, in hard/dense soil returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and removing surplus soil to a distance not exceeding 50 m and depositing where directed and making good the disturbed surface complete all as specified and as directed by Engineer-in-Charge.

Material and labour for plain cement concrete 1:2:4 type B-2 using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and as directed by Engineer-in-Charge.

Supply and fix machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658- 2006 of 60mm thickness, M-35 grade including 25mm thick sand cushion below paver blocks and filling the joints with sand complete all as specified and directed by Engineer- in-Charge.

Supply and fix Steel work in tubular trusses, purlins etc, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St.-240 including all necessary staging, scaffolding, etc as required to work at any height complete all as specified and directed by Engineer- in-Charge.

Supply and fix Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square 75mm long, 12mm dia. each screwed complete all as specified and directed by Engineer- in-Charge.

Supply and fix mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed by Engineer- in-Charge.

Material and labour for preparing new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints Ltd - Apcolite/Goodlass Nerolac (Nerolac)/ Berger Paints Ltd - Luxol/Shalimar Paints - Superlac/Jenson Nicholson - Brolac

Material and labour for 15mm thick rendering in cement mortar 1:4 on brick and concrete surface of external wall finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets

Excavating over areas, not exceeding 1.5m deep and getting out hard/dense soil, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 100mm thick plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base and paving complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 150mm thick plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floor and paving complete all as specified and as directed by Engineer-in-Charge.

Supply and fix glass dividing strips 3mm thick, 38mm width complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Pre-cast cement concrete block masonry 1:3:6 type C1, (using 20mm graded stone aggregate), with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for steel formwork to sides of foundation, footings, side and soffit(if any), base of columns, raft and raft beam, plinth beam and similar work etc. for rough finished square or rectangular surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Mild steel TMT bars 10 mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

Material and labour mild steel TMT bars 6 to 8mm dia as in reinforcement for cover slab, cut to length bent to shape required cranking hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

Material and labour for steel formwork to sides of pillars, posts, struts, piers, columns, etc. for rough finished square or rectangular surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.

Material and labour for steel formwork to sides and soffits of floor or roof beams, cantilevers, bressummers, etc. for rough finished flat surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.

Material and labour for steel formwork to soffits of suspended slabs such as floor slabs, roof slabs, landings, chajjas and similar work not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.

Material and labour reinforced cement concrete M-25 grade (design mix) as in foundation, footing, bases of columns, raft and raft beams, plinth beams, mass concrete and similar work etc complete all as specified and as directed by Engineer-in-Charge. Note: Form work and reinforcement shall be measured and paid separately

Material and labour reinforced cement concrete M-25 grade (design mix) as in beams, columns, water tank slab etc complete all as specified and as directed by Engineer-in-Charge. Note: Form work and reinforcement shall be measured and paid separately

Material and labour for rendering 15mm thick plaster in cement mortar (1:6) on fair faces of the brick or concrete surfaces, finishing the surfaces even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 5 mm thick plastering in cement mortar (1:4) on fair faces ceilings of bricks work or concrete surfaces, finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of new plastered wall surfaces and applying three coat of white wash complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 25mm bore galvanised iron pipes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith

All as per item No. 40 described here-in- before but 20 mm bore complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 40 described here-in- before but 15 mm bore complete all as specified and as directed by Engineer-in-Charge.

Supply and fix rotational moulded polyethylene water storage tank (Cylindrical vertical with closed stop), HDPE, triple layered with ISI marked of 2000 ltrs capacity with inlet & outlet connections, nipple 25mm bore dia, bends, sockets etc, hoisted and fixed in position complete all as specified and as directed by Engineer-in-Charge. Make : Sintex/Polycon/infra/Rotex

Supply and fix ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed of 25 mm bore complete all as specified and as directed by Engineer-in-Charge (Minimum weight - 455 gms) Make: Prayag / POLYTUF or in equivalent

Supply and fix gun metal globe or gate valve, 25mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new unions complete all as specified and as directed by Engineer-in-Charge. Make : Leader/Zoloto/Seiko/Sant/GEM

Supply and fix stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed by Engineer-in-Charge. Make : Leader/Zoloto/Seiko/Sant/GEM

Supply and fix framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.

Vishal Builders