Repairing and renovation of motor starter arrangement with allied works at P.H. No. I (R.R. Colony) of Ashoknagar Municipality Ground water based W/S Scheme under EMSD-I, PHE Dte.in 24Pgs(N).

Amount

Dismantling the existing damaged starter , main switch & allied from existing position all complete & kept at site.

Carrying of voltage stabilizer from Bodai Zone-I P.H.No- III site to above said W/s scheme including loading & unloading all complete.

Carrying of panel from Paikpara P.H.No- II site to above said site W/s scheme including loading & unloading all complete.

Installation of the above Voltage Stabilizer as in item no. 2 on the floor making suitable foundation by supplying all required materials and commissioning the same as per direction of E.I.C.

Installation of the above Panel on as in item no. 3 wall with complete cable connection as per direction supplying all required materials and commissioning the same as per satisfaction of E.I.C

Supply & delivery at site of 63 Amp TPN Rewire able type switch fuse. ( Make Havells/ GEC/ Standard/any other approved make)

Supply & delivery at site of 63 Amps wall mounted 4-way Bus-Bar chamber having 4nos. Copper bus-bar. ( Make Havells/ L&T/ Standard/any other approved make)

Supply & delivery at site of 63 Amp kit kat rewireable. ( Make Havells/ L&T/ Standard/any other approved make)

Supply & delivery at site of 63 Amp. 4 pole on load change over switch. ( Make Havells/ Standard/any other approved make)

Supply & delivery at site of 16 Sq. mm. 1.1 KV grade 4 core Al. conductor armoured P.V.C. /XLPE insulated cable. NB: Cable to be supplied as per sire requirement. ( Make: GLOSTER/NICCO/Polycab / Havell’s/Mescab)

Fitting, fixing of main switch & bus-bar as in item no. 6 to 9 on flat iron frame/angle iron frame on wall by supplying all necessary fixing materials including welding all complete as per direction.

Laying of cable as in item no.10 on wall/surface including S&F of MS saddles with earthing attachment in 10 SWG GI(HOT DIP) wire making holes etc. as necessary mending good damages and paint all complete.

Finishing the end of cable by crimping method including supplying of suitable size Al. thimble, tapes, jointing materials & supplying and fixing suitable type compression gland for above cable including supply of brass gland, rubber ring etc.

Earthing with 50mm dia. G.I. pipe 3.64mm thick x 3Mtr.(10ft.) long and 1 x 4SWG G.I. wire(4Mtr. long) 13mm diametre x 80mm (3inch) long G.I. Bolts, double nuts, washer including S & F 15mm diametre G.I. pipe protection(1Mtr. Long) to be filled with bitumen partly below ground level to an average depth of 3.65Mtr.(12ft.) below the ground level and restoring the surface duly rammed.[This cost includes earth pit and its necessary lid making]

Extra for treatment of soil by salt and charcoal coke for pipe electrode.

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Brick work around the earth pits, neat cement finishing, supply & fitting fixing of MS cover plates above the earth pits all complete as per satisfaction of E.I.C.

Testing, Commissioning the whole installation upto entire satisfaction of E.I.C.

Making internal/external electrification of P/House by 2 x 1.5 sq.mm. P.V.C. cu wire through suitable size casing/capping for 4 nos. point ( 1 no. bracketpoint , 1 no. tube light point , 1 nos. bulk head point and 1 fan point ) and 1 no. 5A ,5 pin plug point with earthing attachment of 1 x 1.5 sqmm cu. Wire with supplying of tube light fittings , bulbs & 1200mm sweep celling fan(Make-As per approved vendor list.) as per approved make including suppying and fixing 10 A. DP MCB (As per approved vendor list.) on wall all complete as per I.E. rules and direction. (including making external illumination by Supply & fixing of 1 no. 40W LED IP 66 type outdoor luminairie incl. Supply & installation of MS bracket & connection complete) (Make : As per Approved Vendor List.)

Making suitable size pump foundation base & valve support with supplying cement, sand, stonechips etc. in the portion of (4:2:1) including plastering, neat cement finish etc. Complete as per direction of E.I.C.( Size: 1.00 mtr. X 1.4mtr.)The above base of tubewell is to be made with 250 mm. thickness brick wall on all side with 200 mm. thick F.C. slab on top including plastering and neat cement finishing.For R.R.Colony ,P.H.No - I & II (R.R.Colony) of Ashoknagar Municipality.

Add: GST @ 18%

Add: CESS @ 1%

KARTICK BAL (BID ID -6825125)

KUNDU ELECTRICAL ENTERPRISE (BID ID -6817721)