Interior renovation works in office space of NIA at 6th floor NTDC, at NIA HQ Building, CGO Complex, New Delhi-110003

Grand Total 1,04,00,000.00

excluding the cost of centering, shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all

complete above plinth level.

5.22A.4 Hot rolled deformed bars kg 25.00 89.65 2,241.25

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of

W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water

proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of

vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed

2.10 22.3 with water proofing compound in recommended proportion including rounding off junction of vertical and SQM 10.00 774.25 7,742.50

horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and

pasted to each other with bitumen @ 1.7 kg/sqm).

FOAM CONCRETE FILLING UNDER TOILETS AND PANTRY:- Filling and compacting Foam Concrete for raising level

2.11 MR of toilets and pantry and finishing in a coat of lean concrete screeding with waterproofing compound CUM 2.00 4,317.73 8,635.45

complete in all respects to take Tile Flooring as per flooring specifications.

3 PAVING AND WET WORKS

TILE DADO :- Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be

specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green,

3.1 8.31 black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick SQM 100.00 1,063.45 1,06,345.00

bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,

including pointing in white cement mixed with pigment of matching shade complete.

CERAMIC TILE FLOORING :- Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more

(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in

3.4 11.40 all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 SQM 40.00 1,225.10 49,004.00

Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white

cement and matching pigments etc., complete.

Digitally signed by AMIT

DSR 2021 / Amount (In Rs.)

S No. Description Unit Qty Rate

Non DSR DSR Non-DSR

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water

absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting,

riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement

slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.

MR Providing and fixing 12 mm laminated flooring as per approved design and colour as per the selection SQM 80.00 2,00,112.27

KITCHEN/ PANTRY/ HAND WASH COUNTER :- Providing and fixing pantry and toilets with Granite stone top (with

straight edge polished nosing) complete with base cabinet made of 20mm BWP board, outside surface

(shutters) finished in 1mm thick Laminate of approved shade. All internal surfaces to have balancing laminate.

The rate inclusive of necessary hardware, handle lock sets, self closing hinges, spring loaded shutter, latch

inside, all cabinet hardware complete as per approval of engineer in charge . Width of work top counter

600mm/ detailed drawings.

4 PARTITIONS AND WALL CLADDING

Providing wood work in frames of doors, windows, clerestory windows and other frames,

wrought framed and fixed in position with hold fast lugs or with dash fasteners of required

4.3 9.1 dia & length (hold fast lugs or dash fastener shall be paid for separately).

4.4 9.1.1 Second class teak wood cum 0.50 1,31,576.95 65,788.48

INSULATION- Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183,

having density 48 kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to wall wirh screw, rawel

plug & washers and held and in position by criss cossing GI wire etc. complete as per directions of Engineer-in-

Cabinet Carcass- Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or

graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination

Grade I, Type II exterior grade IS : 12823 marked, in cabinet carcass with screws and fittings wherever required,

edges to be painted with polyurethane primer (fittings to be paid separately).

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of

approved quality including necessary screws etc. complete.

Providing and fixing bright finished brass handles with screws etc.

SHUTTERS:- Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer

particle board or graded wood particle board IS:12823 marked, exterior grade (Grade l Type ll), having one

4.10 9.129 side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 SQM 20.00 1,982.70 39,654.00

mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per

direction of the Engineer-in-Charge

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-

decorative type, core of block board construction with frame of 1st class hard wood and

4.11 9.21 well matched commercial 3 ply veneering with vertical grains or cross bands and face

veneers on both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 10.00 2,015.75 20,157.50

Providing and fixing aluminium extruded section body tubular type universal HS 3000 Slimline

Concealed Door Closer (having brand logo with ISi, IS : 3564,embossed on the body, door

2.40 NS weight upto 36 kg to 80 kg and door widthfrom 701 mm to 1000 mm), with double speed each 2.00 7,200.01 14,400.02

adjustment with necessary accessories and screws etc. complete

TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI marked, anodised

2.50 9.97 (anodic AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, complete:

Digitally signed by AMIT

DSR 2021 / Amount (In Rs.)

S No. Description Unit Qty Rate

Non DSR DSR Non-DSR

DOOR STOPPER:- Providing and fixing bright finished brass hanging type floor door

stopper with necessary screws, etc. complete.

MORTICE LOCK AND LEVER HANDLES- Providing and installing Tubular Handle TH 123 with

2.70 MR Roses & Escutcheon in SS packaged with Mortice lockset 55mm backset, 20 SS forend, SS EACH 2.00 3,250.01 6,500.01

strike plate and EP Cylinder for all flush doors.

Providing and fixing false ceiling at all height including providing and fixing of frame work

made of special sections, power pressed from M.S. sheets and galvanized with zinc coating

of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25

mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre,

one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia

bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length

with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I.

channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the

ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each

having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia

x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick

4.10 12.45 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to

wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws

@ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter

channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including

jointing and finishing to a flush finish of tapered and square edges of the board with

recommended jointing compound , jointing tapes , finishing with jointing compound in 3

layers covering upto 150 mm on both sides of joint and two coats of primer suitable for

board, all as per manufacturer's specification and also including the cost of making

openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels

suitably fixed, all complete as per drawings, specification and direction of the Engineer in

Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011

(Board with BIS certification marks) sqm 1145.95

Digitally signed by AMIT

DSR 2021 / Amount (In Rs.)

S No. Description Unit Qty Rate

Non DSR DSR Non-DSR

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of

approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of

99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire

Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid

of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm)

comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of

length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to

form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel

item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm

diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size

26.27 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on

periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm

made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450

mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-

sections used in false ceiling support system shall be pre-painted with polyester baked paint,

for all heights. The work shall be carried out as per specifications, drawings and as per

directions of the engineer-in-charge

26.27.1 With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6 Sqm 300.00 2,069.90 6,20,970.00

CEILING PELMETS :- Providing and fixed pelmet of overall size 150mmx150mm and made

hardwood framings hung from ceiling @1000mm centre to centre with 1 nos of 12mm thk.

4.30 MR fire retardant ply on vertical & 12mm thk. Commercial ply on horizontal surface (straight & RMT 35.00 816.05 28,561.77

curved). Inclusive of finishing in Paint.

Providing the gypsum double sided cove of 150mm x 150mm having a facia of 75mm to

macth the specifications same as above

GYPSUM BOARD VERTICAL BAND- upto100mm high gypsum band all round the mineral

fibre/ gypsum ceiling. In order to make the Mineral Fiber/ gypsum ceiling higher than the

4.50 MR Gypsum Ceiling by upto 100mm as per drawings. (visible surface of gypsum band to not RMT 80.00 395.00 31,600.05

exceed 100mm) including plastic emulsion paint.

5.0 FINISHING WORKS

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to

prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile

Organic Compound ) content less than 50 grams/ litre of approved brand and

5.2 13.83 manufacture, including applying additional coats wherever required to achieve even

shade and colour.

Applying priming coats with primer of approved brand and manufacture, having low VOC

(Volatile Organic Compound ) content.

With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC

content less than 50 grams/ litre

Digitally signed by AMIT

DSR 2021 / Amount (In Rs.)

S No. Description Unit Qty Rate

Non DSR DSR Non-DSR

WALL PANELING :-Providing and fixing Paneling upto ceiling height consisting of frame and

required board, frame work made of section made of 50x25 mm , consisting of floor and

ceiling channel 50mm wide having equal flanges of 25 mm and 0.50 mm thick, fixed to the

floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm

dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and

the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm

thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of

610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both

ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon

plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame

work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of

5.4 MR 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered

to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two

flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the

studs using metal to metal flat head screws, including jointing and finishing to a flush finish

with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25

mm x 0.5 mm), joint finisher as per manufacture's specification and direction of engineer in

charge all complete.(Cost of Aluminium framing 600X600mm Paid saperately)

Paneling with 12 mm thick HDHMR board to IS: 5509 SQM 80.00 2,250.00 1,80,000.30

Glass partition : Glass partition of thickness 12 mm , inclusing of providing & fixing of

hardwares & other harwares as per the requirement of site , complete in all respects .

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss /

matt/ suede finish with high density protective surface layer and reverse side of adhesive

5.5 9.127 bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand

and manufacture, including providing and fixing top & bottom pivot & double acting

5.6 MR hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing sqm 20.00 4,540.70 90,814.09

required door fittings, all complete as per direction of Engineer in charge Door handle, lock

and stopper etc. including all complete in all respects

MISCELLANEOUS WORKS

Digitally signed by AMIT

DSR 2021 / Amount (In Rs.)

S No. Description Unit Qty Rate

Non DSR DSR Non-DSR

BLINDS Providing & supplying of Window Blinds as per the approved sample in required

shade and style consisting, of Roller Blinds comprising of optima screen Fabric comprising of

22% polyester, 78% PVC, Fabric weight 460-480G weight per sq m, Thickness 0.67 mm, Yarn

count 18-19/cm, having fire resistance standard – NFPA 701-89 small testing ISO-5659-2

.Thetear resistance should be complying to ISO4674 & breaking resistance – ISO 5081. The

DRIVE UNIT shall be of clutch for quick, easy and safe installation, moulded plastic with steel

spring support and inserted into the tube end. It shall be driven by a ball chain pulley with

ball chain and can be positioned at right side or left hand side of the Shade. The Shade

when lowering or raising, shall be automatically locked in position upon release of the ball

chain by means of a built in friction lock.Universal clutch for left and right hand

operation.Chain Gear Ratio of 1.75:1. The END PLUG shall be molded of plastic witha steel

location pin.The plug shall be inserted into the tube end.(Opposite to the Drive Unit) for ease

6.1 M.R. of installation. The SUPPORT BRACKETS shall be of coated steel & provided with covers and SQM 80.00 2158.86 1,72,709.09

used in right hand or left hand positions differentiated by the acceptance of the of the

rectangular drive unit support or the round idler plug pin.Can beinstalled (a) On Face (b)

Ceiling Mount (c) On Frame (d) in Recess. The Bracket should be protruding outside

maximum of 80mm.The ROLLER TUBE shall be of extruded aluminum with 37mm internal

diameter & skin thickness of 1mm and shall incorporate a key way integral with the tube to

accommodate the spline. The BOTTOM RAIL shall be a Flat Bottom made up of powder

coated steel. The BALL CHAIN shall be 2mm diameter cord with 4.5mm diameter acetal

balls moulded co-axially to it on 6mm pitch to form an endless ball chain. It is used for

raising or lowering action of the shades.

FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over glass surface as

approval of the Architect. (Only film surface area shall be measured and paid).

Cabinet Shutters out of 19mm Commercial Plybaord finished in 1mm Laminate of

matching, Shutters to be fixed to a frame. Rigidly fixed on both sides and top finshed in

laminate. No internal carcass required. All Hinges of hettich or equivalent. Internal Surface

6.3 MR of the shutter in balancing white laminate. All shutters to be provided with Stainless steel SQM 5.00 10362.55 51,812.73

louvers at the top and bottom of the shutter as per the site requirements and instrcution of

the Engineer In charge.

Providing & fixing imported decorative Poly décor fabric Wall Paper (on walls and ceiling) of weight 475 g

6.4 MR /sqm as per approved shade & design including prepration of surface with 2 coats of Nubin Glue based SQM 15.00 3,094.37 46,415.57

Preparation of complete set of shop drawings, including finishing, MEP services, details, design calcualtions etc.

and any other details as and when desired by Engineer In charge /client. A qualified professsional for the

6.5 M.R. purpose of cordination between consultant/ client shall be appointed after due appproval from Engineer In Job 1.00 1,00,000.00 1,00,000.00

Charge.any reputed institute (IIT/ NIT/ Govt. Engg. College etc.) and/ or their services for consulting any matter

concerning the project, the cost of vetting etc.

Digitally signed by AMIT

DSR 2021 / Amount (In Rs.)

S No. Description Unit Qty Rate

Non DSR DSR Non-DSR

Providing and fixing of 4,6 mm thick annealed GRIHA rated lacquered glass manufactured industrially by

curtain coating process with PU lacquer (50 micron thick), opaque (if viewed against a support wall)

conforming to EN 16477 standards for back painted glass , of approved color by Architect/ Client fixed with

compatible Silicone having Shear Bond Strength (Dry, 24 hours), greater than 450 kpa and tack free time of 10

to 30 mins compatible for installation of mirror and lacquered glass / Foam based double sided adhesive tape

for instantaneous adhesion, compatible with mirror and lacquered glass having Shear bond strength (Dry, 15

mins) of 250 to 350 kpa) on a perfectly leveled 12mm thick water proof marine plywood / MDF / Mineral fibre

board which is mounted on the RCC wall/any other structure. The contractor should submit test reports for

backpainted glass from manufacturer - High humidity Resistance (conforms to BS EN 1036 1999); Color fastness

ISO 105B02 standard & Mechanical Resistance ISO 7784 ( Taber Abrasion test ) ISO 2409 ( Cross Hatch Test )

standard The manufactured backpainted glass should be environmentally friendly (no lead, no arsenic, no

copper, noformaldehyde); appropriate recycled content (12% post industrial / 6% post consumer);

compressive strenght (1000 MPa) & tensile strenght (40 MPa),same as float glass

6.7 MR Providing and fixing Aluminium Skirting 100 mm ht - Groove skirting - Natural Anodized Finish RMT 80.00 811.00 64,880.11

Grand Total 29,70,797.56

Grand Total 29,70,797.56

Digitally signed by AMIT

SANITARY FIXTURES & FITTINGS and WATER SUPPLY

SL. NO. DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Providing & fixing glazed vitreous china single trap syphonic

pattern having back inlet ,supporting chair ,wall hung water

closet with cistern complete with all internal

fittings/accessories and CP brass flush bend (European type)

water closet with seat and lid, with C.P. brass hinges and

1.1 NS rubber buffers, adapter, rubber joints fixed to W.C., C.P. brass

screwed washers including cutting and making good the

walls and floors wherever required and HDPE wc pan

connector including jointing with white cement coomplete in

Wall hung W.C. pan (White colour)with white plastic seat & lid

"Thermoset moulded ( bakelite ) IS 2548 Part I

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 6 12,953.18 77,719.09

1.2.2 NS Table top wash basin (white colour)of size: 440x440 mm

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 6 4,317.73 25,906.36

Providing & fixing 15mm C.P. brass single hole wash basin

1.3 NS mixer without popup waste system with 450mm long copper

pipes and brass nut

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 5 3,598.11 17,990.53

1.4 NS Providing & fixing vitreous chinaware urinal comprising

Large flat back wall hung urinal in glazed vitreous China new

NS magnum urinal

15 mm electrically operated solenoid valve with infra red

sensor mounted in a box with SS Cover.

CP brass chromium plated flush piping from solenoid valve to

urinal terminated with a 15 mm screwed spreader

Digitally signed by AMIT

SL. NO. DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

32 mm nominal bore CP cast brass waste

32 mm nominal bore CP cast bottle trap with extension pipe

rubber adopter for waste connection, CP brass wall flange.

For supply,installation,testing & commissioning of sanitary

fixtures(white colour) as per above details. Each 2 21,588.64 43,177.27

Providing & fixing toilet paper holding including cutting and

1.7 NS making good the walls.

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 7 1,079.43 7,556.02

Providing & fixing Horizontal liquid soap dispenser with

1.8 NS stainless steel lid and brackets fixed to wooden cleats with

C.P. brass screws.

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 2 1,439.24 2,878.48

Providing & fixing C.P. brass coat hooks fixed on toilet door

1.9 NS with C.P. brass screws

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 7 215.89 1,511.20

Providing & fixing beveled edge mirror 5.5mm thick of

superior quality plate glass complete with 6mm thick marine

1.10 NS ply sheet ground fixed to wooden cleats with CP brass

screws and washerswith 40 mm wide teak wood frame as per

design including polishing

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Sqm 4 1,727.09 6,908.36

1.11 NS Providing & fixing Hand Shower (Health Faucet) with 8mm

dia, 1M long PVC tube and wall hook CP brass wall flange

For supply of sanitary fixtures as per above details Each 6 1,381.67 8,290.04

Digitally signed by AMIT

SL. NO. DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Providing & fixing, testing and commissioning of storage type

electric water heater with automatic thermostatic control

electric element, pressure release valve, brackets fixed to

expansion fasteners with M.S. nuts and bolts all complete

including cutting and making good the walls wherever

25 litres capacity (Horizontal /Vertical type1.5 kw electrical

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 2 15,831.67 31,663.33

Providing & fixing wall mounted 25 mm dia Stainless steel

1.13 NS coated grab bar including cutting & making good the

walls(size 450mm long)

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 2 503.73 1,007.47

Providing & fixing 15 mm dia C.P. brass bib cock with Hose

union of approved quality.

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 5 1,367.28 6,836.40

FRAGRANCE DISPENSER MACHINE :-Providing and fixing of

Fragrance Dispenser machine complete with refill can and

'C' size battery (2 Nos) for operation fixed to wooden cleats

with CP brass screws

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 2 1,151.39 2,302.79

Providing and fixing of stainless steel finish Paper Towel

1.17 NS Dispenser having capacity of 300-350 paper towels fixed to

wooden cleats with C.P. brass screws

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 2 1,223.36 2,446.71

Digitally signed by AMIT

SL. NO. DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC)

pipes having thermal stability for hot & cold water supply

including all (CPVC) plain & brass threaded fittings including

fixing the pipe with clamps at 1.00 m spacing. This including

jointing of pipes & fittings with one step CPVC solvent cement

and testing of joints complete as per direction of engineer in

Internal Work - Exposed on Wall

1.1 18.7.2 20 mm nominal outer dia pipes. Metre 40.00 325.10 13004.00

1.2 18.7.3 25 mm nominal outer dia pipes. Metre 40.00 408.55 16342.00

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC)

pipes having thermal stability for hot & cold water supply

including all CPVC plain & brass threaded fittings i/c fixing

the pipe with clamps at 1.00 m spacing. This including jointing

2 18.8 of pipes & fittings with one step CPVC solvent cement and

the cost of cutting chases and making good the the same

including testing of joints complete as per direction of

engineer in charge.

Concealed work oncluding cutting chases and making good

18.8.2 20 mm nominal outer dia pipes. Metre 40.00 513.75 20550.00

Providing and fixing brass stop cock of approved quality

Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end):

Digitally signed by AMIT

SL. NO. DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Providing and fixing unplasticised P.V.C connection pipe with

5 18.74 PTMT Nuts coller and bush of approved quality and colour.

18.74.2 15mm nominal bore with 45cm length Each 4.00 107.90 431.60

The Pipes will be supported with threaded G I rods & U clamps

with nuts, washers etc on 50x50x5 mm slotted angle. The cost will

include all support arrangements. The work includes

commissioning of all pipes lines as per drawings and specifications

NS and as directed by engg-in-charge at site.

110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METER 50.00 1079.43 53,971.59

75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METER 50.00 647.66 32,382.95

Providing, fixing, jointing and testing in position ISI marked

(IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for

waste pipe from fixtures to floor trap including reduces, enlarger,

socket, couplers, bends, tees etc including fixing at wall/ ceiling

level supported by clamp & hangers etc. cutting holes in wall/

floors/ slabs and making good the same with cement concrete

NS 1:2:4 complete as required.

Providing & fixing UPVC Floor trap of self cleansing design with

NS stainless steel grating complete in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser

NS Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. EACH 4 647.66 2,590.64

NS Providing & fixing of SS Floor Cleanout, round or square with EACH 4 863.55 3,454.18

G.TOTAL 4,03,727.23

Digitally signed by AMIT

Electrical/FA/PA

DSR-2022 No. Description

S.No Unit Qty Rate DSR Amount MR Amount

1.0 DISTRIBUTION BOARDS.

Supplying and fixing following way, horizontal type three pole

and neutral, sheet steel, MCB distribution board, 415 V, on

surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without

MCB/RCCB/Isolator)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"

curve, miniature circuit breaker suitable for inductive load of

following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase

and neutral), 415 volts, residual current circuit breaker (RCCB),

1.4 having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as

2.0 CABELS / MAINS

Digitally signed by AMIT

DSR-2022 No. Description

S.No Unit Qty Rate DSR Amount MR Amount

Supply ,laying,testing and commissoning of 1100V grade

armoured cable having sector / circular shaped aluminium /

copper conductor PVC insulated cores under ground PVC tape

wrapped inner sheathed, GI strip / wire armoured and overall

extruded PVC sheathed confirming to IS: 1554, laid on wall or

ceiling using GI clamps and spacers as per route shown at site and

further as directed by Engineer-in charge

2.1 MR 16 Sq.mm 4 core copper cable mtr. 50.00 720.00 36,000.00

Wiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable in surface / recessed medium class PVC conduit, with

4.1 1.10 modular switch, modular plate, suitable GI box and earthing the

point with 1.5 sq.mm FRLS PVC insulated copper conductor single

core cable etc. as required.

a 1.10.3 One light point controlled by one 6A switch Per Pts 60.00 1,467.00 88,020.00

iring for group controlled (looped) light point/fan point/exhaust

fan point/ call bell point (without independent switch etc.) with 1.5

sq. mm FRLS PVC insulated copper

4.2 1.54 conductor single core cable in surface/ recessed steel conduit,

and earthing the point with 1.5 sq. mm FRLS PVC insulated copper

conductor single core cable etc. as required

Wiring for circuit/ submain wiring alongwith earth wire with the

following sizes of FRLS PVC insulated copper conductor, single

core cable in surface/ recessed steel conduit as required.

a 1.7.1 2x1.5sqmm+1x1.5sqmmearth wire Per mtr. 250.00 327.00 81,750.00

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Digitally signed by AMIT

DSR-2022 No. Description

S.No Unit Qty Rate DSR Amount MR Amount

Wiring for twin control point wiring using 1.5 sqmm copper

conductor FRLS PVC insulated copper conductor cable drawn

through 25 dia MS conduit laid in surface/concealed over false

4.4 1.4 ceiling or in slab/wall chases including ,2way modular Per Pts 6.00 1,981.00 11,886.00

switches,modular plate ,suitable GI box and earthing the point

with 1.5 sqm FRLS PVC insulated copper conductor single core

cable as required

Supplying and fixing following modular switch/ socket on the

4.5 1.24 existing modular plate & switch box including connections but

excluding modular plate etc. as required.

c 1.24.4 3 pin 5/6 A socket outlet Each 210.00 122.00 25,620.00

d 1.24.5 6 pin 15/16 A socket outlet Each 40.00 197.00 7,880.00

Supplying and fixing following size/ modules, GI box alongwith

4.6 1.27 modular base & cover plate for modular switches in recess etc. as

Supplying and fixing following Modular base & cover plate on

existing modular metal boxes etc. as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm

solid copper conductor PE insulated, shielded with fine tinned

copper braid and protected with PVC sheath in the existing

surface/ recessed steel/ PVC conduit as required.

Supplying and laying HDMI Cable with connector on both ends

upto 15m length or as per site requirement

5 LIGHTING FIXTURES

Digitally signed by AMIT

DSR-2022 No. Description

S.No Unit Qty Rate DSR Amount MR Amount

Supply, Installation, Testing and Commisioning of pre-wired round

shape Surface Mount 15Watt LED Down Lighter fitting complete

with all accessories, housing made of Aluminium Die-cast, System

Efficasy >100 LPW, CRI >80, CCT of 4000K. suitable for 220 V, 50 Hz,

The luminare rated life (L70) >50000 Hours with High efficiency

5.1 MR driver with inbuild surge protection, over voltage protection, short NOS 60.00 1,079.43 64,765.91

circuit protection and operating at >0.95 PF., BIS approved Driver

including connection with 1.5 sq. mm FR PVC insulated, copper

conductor, single core cable and earthing etc as required.

Supply, Installation, testing and Commisioning of 1.2 mtr 4 feet long

Batten light Cove Light: Supply of natural white 4000K Luminaire)

5.2 MR and system efficiancy better than 100 LPW, Low Voltage 12VDC Nos 10.00 647.66 6,476.59

system, with Thermo-conductive adhesive complete etc. as

Supply, Installation, Testing and Commisioning of 2X2 or linear 28-

32Watt LED fitting complete with all accessories, housing made of

Aluminium Die-cast, System Efficasy >100 LPW, CRI >80, CCT of

4000K. suitable for 220 V, 50 Hz, The luminare rated life (L70) >50000

5.3 MR Hours with High efficiency driver with inbuild surge protection, over NOS 50.00 2,591.00 1,29,550.00

voltage protection, short circuit protection and operating at >0.95

PF., BIS approved Driver including connection with 1.5 sq. mm FR

PVC insulated, copper conductor, single core cable and earthing

etc as required.

Supply and fixing the following sizes of PVC medium duty ISI

marked conduits (IS : 9537 Part-III) complete with accessories such

6.1 as bends, junction boxes, pull boxes etc., in recess or on surface

including cutting chases in the walls/floors and making good the

same complete as required.

GI Raceway & Junction boxes ( Raceway on floor shall be of

aluminium only)

Digitally signed by AMIT

DSR-2022 No. Description

S.No Unit Qty Rate DSR Amount MR Amount

MR Providing and fixing 2 mm thick steel sheet factory fabricated post

galvanized raceway with internal partition/compartmentized of

the following sizes including providing removable 3 mm thick GI

cover, knock out holes and fixing accessories earthing with 8 SWG

copper earth wire complete as required including floor supports,

bends, access boxes, tap off boxes and cross over as per

specification and site requirement. (overhead / wall mounted

recovery & function boxes shall be 1.6 mm thick)

A. MR 150-300 mm wide raceway or as per site RM 100.00 1,126.00 1,12,600.00

b MR 75-150 mm wide raceway or as per site RM 60.00 826.00 49,560.00

A. SITC OF FIRE ALARM SYSTEM & ACCESSORIES :

Supplying, installation, testing & commissioning of intelligent Pcs 0 2858.00

1 17.2.4 analog addressable photothermal detector complete with 0.00

mounting base complete as required.

Supplying, installation, testing & commissioning of addressable Pcs 0 3871.00

manual call point complete as required.

Supplying, installation, testing & commissioning of addressable Pcs 0 3506.00

horn cum strobe complete as required.

Supplying, installation, testing & commissioning of fault isolator Pcs 0 3270.00

complete with base as required.

Supplying, installation, testing & commissioning of response Pcs 5 276.00

indicator on surface/recessed MS Box having two LED, metallic

cover complete with all connections etc as required.

Digitally signed by AMIT

DSR-2022 No. Description

S.No Unit Qty Rate DSR Amount MR Amount

Supplying, installation, testing and commissioning of micro

processor based intelligent addressable main fire alarm panel,

central processing unit with the following loop modules and

capable of supporting not less than 240 devices (including

detectors) and minimum 120 detectors per loop and loop length

up to 2 km, network communication card, minimum 320 character

graphics/ LCD display with touch screen or other keypad and

minimum 4000 events history log in the non volatile memory

6 17.2.1 (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with

24 volt sealed maintenance free batteries with automatic charger.

The panel shall have facility to connect printer to printout log and

facility to have seamless integration with analog/digital voice

evacuation system (which is part of the schedule of work under SH:

PA System) and shall be complete with all accessories . The panel

shall be compatible for IBMS system with open protocol BACnet/

Modbus over IP complete as per

17.2.1.2 Two loop panel Each 0 239225.00 0.00

17.3.2 11 Supplying, installation, testing & commissioning of 1.5/3/6W ceiling NOS 5 965.00 4825.00

speaker complete as required.

MR 12 Supplying, installation, testing & commissioning of digital audio NOS 0 75000.00 0.00

amplifier 500 Watt, 25V rms operating at 240 Volt AC Supply

complete as required.

17.5.2 13 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, Mtr. 50 173.00 8650.00

600/1000V rated with annealed copper conductor having XLPE

insulation, steel wire armouring & FRLS outer sheath complete as

17.5.3 14 Supplying and drawing of cable Fire Retardant PVC insulated

copper conductor cable in the existing surface / recessed steel

conduit of following pairs, cores and size including connections

and interconnections etc. as required.

17.5.3.2 15 speaker cable Two pair, 2-core, 1.5 sqmm Mtr 50 89.00 4450.00

Digitally signed by AMIT

DSR-2022 No. Description

S.No Unit Qty Rate DSR Amount MR Amount

M.R. 17 Supplying & Fixing of battery operated illiminated "EXIT" signage, NOS 4 1500.00 6000.00

with 2hrs power Battery backup complete as required.

17.3.9 18 Supplying, installation, testing & commissioning of Voice NOS 0 81756.00 0.00

command keypad 6 zone, with microphone assembly complete

19 as required.

SITC of 24 U rack as per the requirement of site complete as NOS 2 15000.00 30000.00

20 SITC of EPABX , Controller gateway system with the required NOS 1 145000.00 145000.00

number of licences , Connection lines , including Rack and other

accessories as per the site requirement complete in all respects

21 SITC of Analog Phone for the PBX system NOS 80 1450.00 116000.00

SUB HEAD (H) : UPS SYSTEM

Supplying, installation, testing and commissioning of (N+1) 30 kva

total online double conversion fully microprocessor based ,indoor

type, compact UPS system of mentioned rating with designed

output PF .9 at 40 degree and IGBT based PWM technology to

achieve THD < 5% and input power factor of greater than 0.95 at

13 MR 50% loading, Efficiency >= 93% at 50 % load, suitable for three

phase AC input voltage 320 V to 480 V, 50 Hz +3% / - 3 % and three

phase AC output voltage 415 ± 1% volts & frequency 50 ± 0.5 Hz

with all components as mentioned in BOQ, specifications and

schedule, complete as required and as per technical

specification. Each unit shall be comprising of the following: Total 2

no.s (In parallel)

125% rated Rectifier cum charger unit +100% rated Invertor,

Integrated in UPS module

100% rated Inbuilt static switch at the invertor output + 2 Nos. 100%

rated Inbuilt static switches at the static bypass line.

100% rated Inbuilt Maintenance Bypass.

Web-enabled Monitoring and Management through SNMP

protocols for multi-OS environments.

Inbuilt feature required for input phase seq protection and

automatic change. UPS should work on mains and should not go

to battery mode in case of input phase sequence change

Digitally signed by AMIT

DSR-2022 No. Description

S.No Unit Qty Rate DSR Amount MR Amount

Supplying, unloading, installing testing and commissioning of

necessary VRLA batteries of suitable size having 15 minutes back

up time to 30KVA UPS for full loadto be provided. 1 No spare

batteryof same AH to be provided and cost to be added.

Note : Concerning vendor needs to furnish the battery sizing

calculations at the time of GA approval and battery size has to be

as per the approved GA drawing.

Supply, unloading, installation testing & commissioning of

matching cabinet/open racks to house above mentioned

batteries for UPS system along with suitable size interconnecting

cable (for UPS to Battery and battery to battery), MCCB etc.

complete as required & as per specifications.

Supply,installation testing and commissioning of UPS monitoring

software suitable for RJ-45 communication and capable of giving

pop up messages for all alarms received from UPS. All shall be

capable of the following:-

Giving notifications like e-mail, paging notification, broadcast

notification, battery replacement notification, run event-based

Event logging, data logging and action logging (with date, time,

description of fault and event).

Run the battery diagnostic test.

Automated unattended shutdown of computers.

Local notification through audible alarm.

Software should support :

latest version of Microsoft Windows/ Server, AIX, HP-UX, Sun Solaris, Set 1 550881.86 550881.86

Linux, Novell Netware, MAC

Total DSR & Total Non DSR 13,63,355.00 12,59,787.54

Grand Total 26,23,142.54

Grand Total 26,23,142.54

Digitally signed by AMIT

8.0 VOLUME CONTROL DAMPER Unit Qty Rate Amount

Supply, installation, testing and commissioning of GI volume control duct damper

complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc,

Supply, installation, balancing and commissioning of factory fabricated GSS sheet

metal rectangular/round ducting complete with neoprene rubber gaskets, elbows,

splitter dampers, vanes, hangers, supports etc. as per approved drawings and

specifications of following sheet thickness complete as required.

Diffusers & Grills

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with

aluminium volume control dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills with

louvers but without volume control dampers complete as required

Supplying, fixing testing commissioning of supply air diffusers of powder coated

aluminium with aluminium volume control dampers with anti smudge ring &

Supplying, fixing testing commissioning of Return air diffusers of powder coated

aluminium without volume control dampers with anti smudge ring & removable

Supplying and fixing of following thickness duly laminated aluminum foil of mat

finish closed cell Nitrile rubber (Class "O") insulation on existing duct after applying

16.0 16.23 suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide

and 3 mm thick self adhesive nitrile rubber tape insulation complete as per

specifications and as required.

Total Amount 6,19,584.00 0.00

Total Amount 6,19,584.00 0.00

HVAC TOTAL 6,19,584.00

Digitally signed by AMIT

S NO Description UOM Qty Rate DSR Amount Non-DSR Amount

A. UTP Components for Data & voice

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

1. (DSR 1.53.1) Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 MHz, METRE 4740 57.00 270180.00

Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply, Installation, Testing and Comissioning of I/O port for CAT6 cable termination at

Work Station end.

Supply , Installation , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

3 information outlet (I/O) to end user device connectivity. Nos. 160 450.00 72000.00

Supply, Installation, Testing and Comissioning of CAT6 patch cord 1 Mtr (3 feet) for

4 information outlet (I/O) Nos. 80 285.00 22800.00

Supply, Installation, Testing and Comissioning of 24 port Loaded Jack Panel for CAT6

cable termination at rack end.

Supply , Installtion , Testing and Comissioning of 4 port Face Plate white for I/O fixing at

C. 200 Pair MDF Box

7 200 Pair MDF Box with mounting Frame Nos. 1 11531.00 11531.00

Total : C - MDF Box

Supply instllation testing and commissioning of 24 port POE switch

Supply instllation testing and commissioning of 24 port Non POE switch

SITC of IP based Dome IR Camera 2 MP camera complete as required etc all complete

Supply, Installation, Testing and Commissioning of 12Ch Embedded Network Video

11 Recorder with 4 Sata Supports 1 × RJ45 1000M ,4K Cameras, HDMI, VGA, RAID, No's 1 84,302.00 84,302.00

Redundant power supply, Smart Analytics and ONVIF

SITC of SSD Hard Disk Drive 4TB, 24/7 surveillance category Only complete etc as

required.etc.all complete.

13 SITC of wifi access points as per the selection of Client or the site requirement No's 6 14,926.00 89,556.00

SITC of wifi access points controller as per the selection of Client or the site requirement

GRAND TOTAL (A+B+C+D+E) 270180.00 1138871.00

GRAND TOTAL (A+B+C+D+E) 270180.00 1138871.00

Digitally signed by AMIT

S NO DSR / MR DESCRIPTION UNIT QUANTITY RATE AMOUNT

1 MR MODULAR FURNITURE

Providing and fixing of WORKSTATION -of size of DESK (1200 X 600

X 750) WITH PEDESTAL as per the direction of EOI. The size may

vary as per the actual requirement of the client.The finishes shall

1.1 MR be as per the selection of client. NOS. 75.00 12,500.00 9,37,500.00

Providing and fixing of CABIN TABLE (1500 X 700 X 750) & (900 X

450 X 750) as per direction of Engineer In-CHARGE.The size may

vary as per the actual requirement of the client.The finishes shall

1.2 MR be as per the selection of client. NOS. 3.00 24,000.00 72,000.00

Providing and fixing of SENIOR CABIN TABL (2100 X 750 X 750)

(900 X 450 X 750) (2100 X 450 X 750) as per direction of Engineer

In-CHARGE.The size may vary as per the actual requirement of

1.3 MR the client.The finishes shall be as per the selection of client. NOS. 1.00 47,999.00 47,999.00

Providing and fixing of VIDEO ROOM TABLE (1850 X600 X 750) as

per direction of Engineer In-CHARGE.The size may vary as per the

actual requirement of the client.The finishes shall be as per the

1.4 MR selection of client. NOS. 3.00 22,000.00 66,000.00

Providing and fixing of FULL HEIGHT STORAGE (7700 X 500 X 2400)

as per direction of Engineer In-CHARGE.The size may vary as per

the actual requirement of the client.The finishes shall be as per

1.5 MR the selection of client. SFT 20.00 8,500.00 1,70,000.00

2 MR LOOSE FURNITURE -

Providing and fixing of TWO SEATER SOFA as per direction of

Engineer In-CHARGE.The size may vary as per the actual

requirement of the client.The finishes shall be as per the selection

Providing and fixing of SINGLE SEATER SOFA as per direction of

Engineer In-CHARGE.The size may vary as per the actual

requirement of the client.The finishes shall be as per the selection

Providing and fixing of COFFEE TABLE (1050 X 600 X 600) as per

direction of Engineer In-CHARGE.The size may vary as per the

actual requirement of the client.The finishes shall be as per the

2.3 MR selection of client. NOS. 1.00 14,500.00 14,500.00

Providing and fixing of ROUND COFFEE TABLE (600 DIA) as per

direction of Engineer In-CHARGE.The size may vary as per the

actual requirement of the client.The finishes shall be as per the

2.4 MR selection of client. NOS. - -

Providing and fixing of ROUND SIDE TABLE (450 DIA) as per

2.5 MR direction of Engineer In-CHARGE NOS. 1.00 12,500.00 12,500.00

Providing and fixing of ACCENT CHAIR_TYPE 1 as per direction of

Engineer In-CHARGE.The size may vary as per the actual

requirement of the client.The finishes shall be as per the selection

2.6 MR of client. NOS. - -

Providing and fixing of ACCENT CHAIR_TYPE 2 as per direction of

Engineer In-CHARGE.The size may vary as per the actual

requirement of the client.The finishes shall be as per the selection

2.7 MR of client. NOS. - -

3 MR CHAIRS -

Providing and fixing of C1 WORKSTATION AND MEETING ROOM

3.1 MR as per direction of Engineer In-CHARGE NOS. 75.00 5,500.00 4,12,500.00

Providing and fixing of C2 CABIN MAIN HEAD CHAIR as per

3.2 MR direction of Engineer In-CHARGE NOS. 4.00 6,500.00 26,000.00

Providing and fixing of C3 CABIN VISITORS CHAIR as per direction

3.3 MR of Engineer In-CHARGE NOS. 9.00 5,500.00 49,500.00

Providing and fixing of C4 CONFRENCE CHAIR as per direction of

3.4 MR Engineer In-CHARGE NOS. - -

Providing and fixing of C5 VIDEO ROOM as per direction of

3.5 MR Engineer In-CHARGE NOS. 6.00 7,500.00 45,000.00

TOTAL FURNITURE 19,79,499.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: Fire Fighting

S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL AMOUNT TOTAL AMOUNT

S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL AMOUNT TOTAL AMOUNT

1 1.4 Providing, fixing, testing & commissioning of 15mm dia

quartzoid bulb type sprinklers of rating 68 degree

centigrade with required accessories : - -

2 1.4.1 Pendent Sprinkler/Upright Sprinkler Each 50.00 522.00 26,100.00

Supplying, installation, testing & commissioning of sprinkler

flexible pipe (UL Listed) of stainless steel complete with 15 NPT

on reducer thread with maximum working pressure of 175 PSI

test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm

NPT male thread to sprinkler head (Outlet) 15mm NPT female

thread with reducer, nipple, 2 side brackets, center bracket,

stockbar of following sizes complete as required.

Providing and fixing ISI Marked of approved make Fire

3 Extinguishers complete with all accessories as per

manufacturer's specifications.

a) CO2 gas nozzle type - 4.5 Litre capacity (IS:15683). 1 NOS 5709.53 5709.53

Mechanical Foam gas cartridge type. 9 Kg capacity

ABC dry powder stored pressure type 6 kg capacity

Digitally signed by AMIT