PROVISION OF LANDSCAPE LIGHTING AND FOOTPATH WAY LIGHTING AT HUBBALLI AIRPORT.

Amount

Supply of 10W, LED based cylindrical bollard Light fittings with Pressure die cast aluminium housing with pipe and polycarbonate diffuser with minimum IP 65 protection, Lumen out put of minimum system Lumen output of 800lm or above with surge arrestor, Terminals for termination of cable etc complete as required (Make: Crompton Model No LPTW-10-CDL or Equivallent).

Supply of 40W, LED Decorative Indiract post top light fitting, suitable to operate on 230V, 50Hz, ac supply with luminaries housing of pressure die-cast aluminium alloy, Polycarbonate body with minimum IP 65 protection, minimum system Lumen output of 2000lm or above etc., complete as required (Make: Crompton Model No LPTO-40-CDL or Equivallent)

Supply of 300W, LED integral Flood light fitting having minimum system luminous efficacy of 95Lm/ watt or above, with 50,000 burning hours suitable to operate on 240V, 50Hz, with luminaries housing of pressure die-cast aluminium alloy, Lense for LED, with IP 66 protection etc., complete as required.

Supply of RGB LED multicolour light fitting of 100W, minimum IP65 protection, made out of pressure diecast aluminium, etc complete as required.

Supply of PVC insulated , PVC Round sheathed, flexible Copper Conductor industrial cable, of 1100 Volts grade of following sizes confirming to IS 694 (Part-1) with up to date amendments etc complete as required 4CX2.50 Sqmm

Supply and of SINTEX Make juction box Of size 200 x 140 x 95mm (Model number GSJB 2014 ) confirming to IS standard etc complete as required.

Supply of HDPE pipe of 32 mm dia size PE 63 grade PN 6 rating conforming to IS 4984 as required.

Supply of HDPE pipe of 40 mm dia size PE 63 grade PN 4 rating conforming to IS 4984 as required.

Installation testing and commissioning of Bollard Light fitting by providing PCC foundation 1:2:4 concrete of size 250X250X350(LBD)mm with suitable foundation bolts as recommended by the Manufatutere, termination of cable at the terminal box etc complete as required

Installation testing and commissioning of Post top light fitting on a 2.5Mtr ,40mm dia GI pole with 200mm dia ,5mm thick MS base plate with 4Nos of Holes, double coat painting ,providing PCC foundation 1:2:4 concrete of size 300X300X400(LBD) mm with suitable foundation bolts, termination of cable at the terminal box etc complete as required

Laying of HDPE pipe size upto 50mm direct in ground (75 cm below ground level) including excavation and refilling the trench

Laying of one number PVC insulated and PVC sheathed flexible power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METALpipe as required up to 35 Sqmm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing HDPE pipe as required up to 35 Sqmm

Desgin, Manufacturing, Supply, Installation, Testing and Commissioning of free standing floor mounted LT Panel of cubicle type made out of 14 SWG thick CRCA sheet, totally enclosed, out door type, Sloped roof, dust and vermin proof, indoor compartmentalized, Double door, suitable for operation on 3 phase and neutral, 415 volts, 50 hz, AC System with Bus bars, earth bar connections including internal wiring with suitable sizes wire/ cable, interconnection, duly powder coated, painting etc.The panel shall have provision for bottom cable entry, including supply and installations of following switchgears, metering instruments and accessories in the L.T.Panel and as per specifications. a) 200 amps 4pole MCCB thermal release range160-200amps, Breaking capaity 25KA (L & T make)-3Nos b) Add for interlocking (mechanical)-2Nos c) LED Indication Lamp-RYB-2Set,ON OFF-3Set OUT GOING MCCB a) 40amps 4 pole, MCCB having 18KA breaking capacity, 32-40 amps thermal release range( make : L & T make)-4Nos b) 32Amp 4 pole MCB-2Nos

Manish Electricals

prakash electricals

J K ELECTRICAL WORKS