Electrifying Elephant Camp at Kozhikamuthi Topslip

Amount

LT Panels METERING PANEL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS AT SITE LABOUR CHARGES ETC .., COMPLETE Supply, Unloading,Store, installation, testing and commissioning of factory assembled, 1.1kV, 500 A TPN , 300 A neutral Link fully insulated, INDOOR TYPE , complete with Incoming Outgoing switchgears with suitable rating Busbar indication Lamp, Metering Arrangement for 25 Submeters with suitable space for terminations for Incoming & Outgoing Cables as per Enclosed General, Paricular Specification & SLD. The rate shall exclude all civil works such as foundation pad, which will be provided by client. ( Floor Mounted Type )

Supply , Installation of 90 KVA hybrid Energy generator Including AC and DC switchgear Minimum total rated capacity of 90 kVA (Vp-p 400V/Vp-n 220V; Fq 50Hz) 48 V system Hybrid Solar Inverter with MPPT Charge Controller with AC and DC coupling enabled. Minimum Power factor: 80% Automatic power reduction in case of overload (AC side cut-in current). Protection against overload and reverse polarity. System output to be three phase 230 V Containerised Solution with active cooling With Dual output – For Critical and non critical loads. Input for backup DG set for critical power in case of outage Containerised Solution With independent civil platform and Fire protection. System must be Remote monitorable and control for emergency usage. Real-time & historical data with a storage capacity of at least: more than 2 years for main data (energy measurements, consumption data and alarms) and 6 months for advanced data (power measurements). All the relevant parameters of PCU will be available for remote monitoring over internet using GPRS (2G,3G & 4G enabled) based monitoring solution. PCU will have GPRS (2G,3G & 4G enabled) ability based on SIM card which will be provided by the contractor. The monitoring system will provide free APIs for the monitored parameters. (prepaid/postpaid will be used as applicable). The minimum parameters to be monitored are (instantaneous and historical values/Hourly): Total energy (kWh) and power (kW) produced by PV , Consumption load patterns , Voltage , Battery Voltage , Temperature and % to be indicated.

BESS 102000 AH • All-in-one system complete with battery, hybrid inverter plugin ,, HVAC, fire suppression and local controller • Maximum safety utilizing the safest type of lithium battery chemistry (LiFePO4) combined with an intelligent 3-level Battery Management System • Outstanding performance and long lifespan with over 5000 cycles • Bi-directional hybrid inverter with multiple modes for SYSTEM SPECIFICATIONS AC DATA GENERAL DATA Module mininum capacity Capacity 100Ah Rated discharge: Constant current discharge (0.2C) till the discharge end voltage of battery pack at 25±3°C Nominal Voltage 48V -52.1 Configuration: 15 cells in series. Voltage of single cell is 3.2V. Charge Voltage 54V Maximum Continuous Charge Current 50A @25°C 5 Voltage at End of Discharge ~ V @ 80%DOD Maximum Continuous Discharge Current 50A @25°C Operation AllowableTemperature Range Charge: 0 - 60°C Discharge: 15 - 35°C -20 - 60°C Operation Allowable Humidity Range ≤95% RH Storage ≤85% RH Operation

Clearing Scrub jungle growth

Earth work Excavation and depositing on bank with an initial lead of 10 m and lift of 2 m in hard stiff clay, stiff black cotton, hard red earth , shales, murrams, stoney earth, earth mixed with small size boulders,and hard gravelly soil for foundation as per SS 20 B

Supplying and filling sand in foundation, basement and in trenches rammed and consolidated etc. complete.

Filling in Foundation and basement with Excavated earth in layers of more than 150 thick

Cement Concrete 1:5:10 using 40 mm iss H.G Metal including cost and conveyance of all materials at site , labour charges, curing etc.., complete and as directed by the department officers

Supplying and erecting Centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOSKS, STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm x 60cm and BG 10 stiffened wit welded mild steel angles of size 25mm * 25mm x 3mm for boarding laid over countrywood joists of size 10cmx 6.50cm spaced at about 90cm centre and supported by casuarian props of 10cm to 13cm dia spaced at 75cm centre etc., complete and as directed.

Supplying fabrication and placing in position steel rods for reinforced including cost of steel all works

Cement Concrete 1:2:4 using machine crushed / Hand Broken 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work exculding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 and kraft paper laid without claiming extra cost etc., complete complying with standard specification.

SUPPLY AND ERECTION OF GI STEEL POST WITH FENCING FIXING 80MM DIA & 3.2MM THK

SUPPLY AND ERECTION OF TATA FENSING CHAIN LINK 2.5MM THK AND 8' HEIGHT AND 50 X 50 MM SIZE

Iron Painting

Supplying, detailing, and fabricating as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Architect/Engineer), transporting to site and erecting structural steel members of Grade Yst310 like column, roof trusses, Beams, lattices, rakers, bracers, runners, Purlin ,cleats, Sag rods ,M.S. chequered plates ,Ladders,struts for all heights & at all levels including provision of necessary erection bolts(Grade 4.6), fixing bolts , nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary operations such as straightening, bending, cutting, drilling, grinding, machining if specified, and welding to the existing Columns , Beams etc., complete. NOTE: No allowance will be permitted for weights of rivets, bolts,washers,screws etc. in calculating the weight of the completed structure.No allowances will be permitted for welding or for rolling margins. One tonne for the purpose of payment shall mean ONE METRIC TONNE i.e. 1000 Kg

PILLAR PANEL FOR EMERGENCY POWER INCLUDING COST AND CONVEYANCE OF ALL MATERIALS AT SITE LABOUR CHARGES ETC .., COMPLETE Supply, Unloading,Store, installation, testing and commissioning of factory assembled, insulated,galvanized, OUTDOOR TYPE , enclosure with weather Proof IEC60529 rating,Galva complete with suitable rating Aluminium Busbar,63A HRC fuses,indication Lamp,2nos-32A 2POLE MCB for 32A weather proof sockets with suitable space for terminations for Incoming & Outgoing Cables as per Enclosed General, Paricular Specification & SLD,enclosure body earthed with Cu.gauge wire. The rate shall exclude all civil works such as foundation pad, which will be provided by client. ( Floor Mounted Type )

MV CABLES Providing, laying, testing and commissioning of 1100V grade XLPE type A2XFY insulated PVC sheathed Flat Strip / tape armoured aluminium / copper conductor cable for mains and sub mains as per specifications and drawings(The cables shall be confirmity with IS:7098PART-1). The cables shall be laid in Trenches / Hume Pipes or buried directly underground or on cable trays. PVC/XLPE ARMOURED Cables with ALUMINIUM Conductor 650/1100 V. Grade confi rming to IS:7098 (Pt-1) 1988 - No .of cores 4 - 95mm2 Aluminium Conductor Material Plain annealed Copper as per Class 1 of IS:8130/2013, latest Max. D.C. resistance of conductor at 20° C (ohm/km) 4.61 Shape of the conductor Solid Circular Insulation Material XLPE as per IS 7098(Pt-1)/88, Latest Nominal thickness (mm) 0.7 Core identification Red,Yellow,Blue Inner Sheath Material Extruded PVC Type ST2 as per IS:5831/84 Minimum thickness (mm) 0.3 Armouring Material Galvanised Steel Type of armouring Round Wire Nominal size of armour (mm) 1.4 Tolerance on armour dimensions ± 0.040 mm Outer Sheath :Material Extruded PVC Type 'ST2' as per IS:5831/ 84

Type of cable 2XWY Voltage Grade V 1100 No of cores X size in sqmm 3 Core X 4 Sq.mm Conductor Material Plain annealed Copper as per Class 1 of IS:8130/2013, latest Max. D.C. resistance of conductor at 20° C (ohm/km) 4.61 Shape of the conductor Solid Circular Insulation Material XLPE as per IS 7098(Pt-1)/88, Latest Nominal thickness (mm) 0.7 Core identification Red,Yellow,Blue Inner Sheath Material Extruded PVC Type ST2 as per IS:5831/84 Minimum thickness (mm) 0.3 Armouring Material Galvanised Steel Type of armouring Round Wire Nominal size of armour (mm) 1.4 Tolerance on armour dimensions ± 0.040 mm Outer Sheath :Material Extruded PVC Type 'ST2' as per IS:5831/ 84

LV SUBMAINS WIRING FROM PANELS UPTO DBs-CABLES Provide and install cable terminations for the above cables including double compression type chrome plated brass glands and lugs(crimping type), PVC taping as required and all accessories complete. 3C x 4.0 sqmm XLPE Cu. Armoured.Cable

LV SUBMAINS WIRING FROM PANELS UPTO DBs-CABLES Provide and install cable terminations for the above cables including double compression type chrome plated brass glands and lugs(crimping type), PVC taping as required and all accessories complete. 3C x 2.5 sqmm XLPE Cu. Armoured.Cable

EARTHING DETAILS Supply of " maintenance free Earthing system comprising of 19.0 mm dia 3 mtr long Earth electrode is a solid steel rod made of high tensile low carbon steel & coated with molecularly bonded copper on the outside the thickness of copper coating electrode shall be with atleast 250 micron + 1 bag (50 pounds) Carbon based environment friendly backfill compound and suitable G.I clamp.Manual Installation "Jef Ecosafe" Earth electrode system includes 1) Auguring required dia and depth bore in normal /soft soil. 2) Installation / Driving of electrode. 3) Filling bore with carbon based POWERFILL backfill compound (Earth enhancement conductive concrete backfill).4) Installing the clamp. i.e., for DG set Body & Neutral, DG Panel Earthing etc.. as applicable for the project complete with sutiable size chamber & heavyduty manhole cover.(As per IS - 3043) or equivalent technical spec.

Providing and laying 8 Gauge multistrand PVC insulated unarmoured Cu. Wire through Exisiting PVC conduit in floor / ground.

25 x 6mm G.I. Flat (DG BODY EARTHING)

25 x 3mm CU. Flat (DG NEUTRAL EARTHING)

Automation wiring and commissioning– Remote monitoring devices for monitoring of Solar plant .

Man power for Solar System - Solar modules -Hybrid unit - BESS - etc

Transportation for Solar System - Solar modules -Hybrid unit BESS - etc

Maintenance cost & training and capacity building

Digital Documentation

Insurance

Dharani Geotech Engineers India Private Limited (BID ID -1228019)