Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹92.9 LAccepted-Finance | ₹92.9 L | 1 | Accepted-Finance Accept |
| 2 | 2₹97.2 L+₹4.3 L (4.61%)Accepted-Finance | ₹97.2 L+₹4.3 L (4.61%) | 2 | Accepted-Finance Accept |
| 3 | 3₹1.2 Cr+₹25.0 L (26.9%)Accepted-Finance | ₹1.2 Cr+₹25.0 L (26.9%) | 3 | Accepted-Finance Accept |
| 4 | Rejected-Technical | - | - | Rejected-Technical Reject |
Tender Value
₹97.6 L
EMD Value
₹2.0 L
Closing Date
4 Feb 2022, 11:00 amClosed
Deputy Conservator of Forest, UT, Chandigarh
Forest and Wildlife Department, Paryavaran Bhawan, 2nd Floor, Madhya Marg, Sector 19B, Chandigarh
Fabrication of Bonsai Section in Botanical Garden
2022_CHD_64097_1
FOR/2022/3601/28.01.2022
Open Tender
Miscellaneous Works
Item Rate
60 days
Chandigarh
As per Tender Document
6 documents required · 6 mandatory
₹0
₹2.0 L
Chandigarh
23 Feb 2022
28 Jan 2022
4 Feb 2022
28 Jan 2022
4 Feb 2022
28 Jan 2022
28 Jan 2022 - 4 Feb 2022
2 Feb 2022
Amount
Item with Detailed Specifications
Steel Structure -Providing and Erecion of Steel Sturucture as per Structural Drawings at Site with Typical Portal fabricated with steel plates of GRADE 350(FE-490) as per IS : 2062 with minimum Welding shall confirm to IS:816 and minimum Yield Stress of the Electrode 360 MPS and UTS 510-610 MPA as per IS : 814 . Foundation BOLTS of 8.8 GRADE & NUTS SHALL CONFORM TO IS:4000:1992.
Painting of Steel Structure- Painting of Steel Structure includingh the cost of Material, labour, Scaffolding and at site, The Metal surface shall be thouroughly cleaned of any Grease and Oil which shall be then Primered with Enamel Based Metal Primer of Asian/Nerolac/Berger/Dulux make. Two Coats of Aluminium paint Shall be Done over the Primered Structre of Asian/Nerolac/Berger/Dulux make
Stainless Steel Welded Wire Mesh- Providing and Fixing of Stainless Steel welded Wiremesh of 1.6mm th. Wire and 50mmx50mm Void. The Fixing Shall be done with M.S. Strip and Self threading Screws. The Cost Shall Include the cost of Material, labour, Installation at site. The Welded Wiremesh Should be of 304 Grade with Lab test Certificate. Wiremesh Void shall be of 50 mm x 50mm with tolerence of +/- 1mm and the thichness of wire shall be 1.6mm with tolerence of +/- 0.1mm
Polycarbonate Sheet- Providing and Fixing of poly carbonate sheet 3mm thick. The fixing shall be done with MS strip/ Cladding painted (Asin Item No. 2 above)
Earthwork Excavation- Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m (all kind of soil)
Good Earth Filling- Excavating, supplying and filling of local goods earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, side of foundation etc complete
PCC in Foundation and under Pavement- Cement concrete bedding in foundation and under pavement including shuttering, consolidation and curing etc complete 1:4:8 (in foundation)
RCC work for foundation: Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing but excluding the cost of reinforcement- All work up to plinth level 1:1.5:3 (in foundation)
RCC work for foundation: Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing but excluding the cost of reinforcement- All work up to plinth level 1:2:4 (For Plinth beams
Centering and Shuttering:- Centering and Shuttering including strutting, propping and removal of form for Foundations, footings, bases of columns etc for mass concrete
Steel Reinforcement-Fabricating and placing in position for steel reinforcement for RCC work including cutting bending, binding and cost of binding wire etc including wastage and rolling margin complete Thermo-Mechanically treated bars of grade Fe-500D or more
Entrance Gate-Providing and fixing MS Designer Gate (AS per Drawing)
Nursery Net:- Providing and fixing of nursery net around Bonsai section
Brick Work: Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in Cement Mortar 1:6 (1 cement: Coarse sand)
Foot Path 3'-6" wide: Providing and laying designer tiles (approved 40 mm thick)
Water Body:- Construction of water body as per drawing including fixing of approved tiles and water proofing
MS Chain railing:- Providing and fixing of MS Chain railing on both sides of foot path tied with MS round pipe poles as per drawing
Fountain:- Providing/ erecting stone fountain in water body ( Approved one)
Display boards:- Providing and fixing of display boards as per drawing
Watering systems
Electrification
Contigency
Technical Supervision during execution of work
N.S. FABRICATORS
bnal prefabs pvt ltd
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .