SPECIAL REPAIRS TO TOILETS AT VARIOUS LOCATIONS IN HOSPITAL COMPLEX AT CHAF BANGALORE

Amount

Taking down chowkat or frame with shutter (without taking off shutter from the frame) n.exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work complete all as specified and directed by the Engr-in-charge.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 1.5 sqm but n exc 4sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed by the Engr-in-charge.

Taking down shutters of any description exc. 2 sqm each, making good disturbed surfaces and removing materials from site of work complete all as specified and directed by the Engr-in-charge.

Taking down shutters of any description exc. 1 sqm n exc 2 sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed by the Engr-in-Charge.

S&F Solid PVC door frame of size 50mmx 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube including making good to jambs with CM 1: 4 and finished to match with existing surface complete all as specified and directed by the Engr-in-charge.

S&F factory made solid panelled PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail and bottom rail ,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joint together with solvent cement complete all as specified and directed by the Engr-in-charge.

S&F Pressed steel frames for doors size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and directed by the Engr-in-charge.

M&L for PCC 1:3:6 type C-0 (using 12.5mm graded aggregate) as filling the chowkats/frames etc complete all as specified and directed by the Engr-in-charge.

S&F mild steel work as in band, strap, hold fast, clamp, cleat, hook, hinges base tie for floor, frame, support or stay for rain water pipe etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast block including necessary form work etc complete all as specified and as directed.

S&F second class hard wood 35mm thick plain framed panelled shutter (2 panels) with lock rail and panelled of 9mm (BWP ) commercial ply or 12mm venered particle board with commercial veneering on both face the size of rail and style as per (IS 1003 PART I) kiln seasoned and chemically pressure treated section exc 13 and not exc. 25sqcm all as per specified and as directed.

S&F in repair mild steel helical door spring 300mm long ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed by the Engr-in-charge.

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed by the Engr-in-charge.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by the Engr-in-charge.

S&F 100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed

S&F floor door stopper of aluminiumalloy body overall length of cover plate 150mm and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by the Engr-in-charge.

M&L for preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and as directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding ( but not backing) and rubbish off the premisies complete all as specified and directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed or bedding in CM 1:4 complete all as specified and directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed or bedding in CM 1:4 complete all as specified and directed.

M&L for glazed ceramic tiles coloured of size 450X 300X 7mm thick as vertical sruface set and jointed in neat cement slurry and pointed in white or colour cement mixed with pigment to match the shade of the tiles complete all as specifiedc and as directed with 10 mm th rendering 1:4 for laying wall finishes complete all as specified and as directed.

Taking down cement plaster of any thickness on brick ,concrete ,PCC block or stone walls, ceiling etc including raking out joints hacking for key scrubing down with water etc complete all as specified and as directed.

M&L for Rendering 10 mm thick on fair faces of brick works or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement all as specified.

M&L for rendering 10mm thick in cement morter 1:6 and 5mm thick in cement morter 1:4 in two layers on fair faces of brick work or concrete surfaces with water proofing compound finished even and smooth without using extra cement complete all as specified and as directed.(Note : WPC shall be measured and paid separetely)

Supply only water proofing compound complete all as specified and as directed.

M&L for rendering 5mm thick on concrete surfaces of ceiling in cement morter 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Demiolition of concrete of any description and in any position including existing treatment of sunken floor complete all as directed by Engineer-in-Charge.

M&L for PCC 1:5:10 Type E-2 (using 40mm graded aggregate) as in filling in sunken slab complete.

M&L for providing water proofing treatment to sunken floor complete all as per following specification:-

Providing 20mm thick cement plaster in cement mortar 1:3 in mixed with Pidi Proof LW or Dr Fixit @ 200 ml per 50kg of cement and finished even and smooth surface without using extra cement. Note : WPC shall measured and paid saperately

Application of two coats of pidifin 2k water proof coating i.e proof coat of Pidilite @ approx 1.00 Kg per sqm as per manufactures instructions.

Note :- (i) The rate includes for preparation of surface treatment and sealing of all joints, cracks, corners and junction of pipes etc and ponding test complete all as specified and directed by Engineer-in-Charge . (ii) PCC filling shall be measured and paid separately. (iii) Water testing of sunken floor shall be carried as per direction of GE & rates quoted by the tenderer shall be deemed inclusive of expdr incurred on testing.

S&F in repairs Vitreous China urinals, bowl type (back or corner wall type), half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F in repairs urinal Spreader incl fixing with 15mm dia pipe all specified and directed.

Urinal partitions, 8 to 10 mm thick PVC solid board including fixing the same to wall with necessar cleats complete all as specified and directed. (Note : Colour of the PVC solid board approve b Engineer-In-Charge.

S&F in repairs white colour vitreous china wash basin oval type (18 X 13 X 7 inch size) including brackets, 32mm dia CP waste coupling, waste pipe, short connection complete all as specified and directed.

Supply only 15mm pillar tap,cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure,with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and as directed (Fixing include in item No 36). Cera - F2002101 or equivalent

S&F in repairs vitreous china squatting pan Orrisa pattern of size 580 X 440mm white with integral foot rest 'P' trap including connection to trap and flush pipe anti-syphonage pipe etc complete including making good to floor.

S&F in repairs Vitreous China wash down water closet pan (Pedestal Pattern), White with 'P' or 'S' trap, including provision of fixing bolts and connecting upto drain and flushing pipe etc. complete.

Supply only plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device (Fixing include in item No 39).

Supply only PVC flushing cistern with flush out valve type,10 ltrs capacity,low level white with inlet ball valve,float and handle including bracket including flush pipe complete (Fixing include in item No 38 & 39).

S&F in repair PVC connection pipe 450mm long 15mm dia both end having brass coupling nut and PVC washer complete all as specified and directed by Engr-In Charge..

S& F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1 m long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. Cera - F8030104 or equivalent

S&F in repair wall mounted hand rail (without hinge )600 x 100 mm and incl necessary fixing arrangement to wall complete all as specified and directed by Engr-In-charge.(Cera cat No B2210102 )

S&F in repair bib taps, fancy type with long neck chromium plated with crutch or butterfly hadle screwed down screwed for iron pipe or brass ferule of 15mm bore complete all as specified and as directed.

S&F in repairs 15mm two in one Bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified.

S&F in repair 125mm dia brass chromium plated shower rose including arm with or without swivel joints including fixing to steel pipe or union complete all as specified and directed by Engr-In Charge.

S&F in repairs premium quality wall mixer system with provision for overhead shower complete with 115mm long bend pipe, connecting Legs & wall Flange of make Jaguar, Cera, Somany or equivalent. Make - Cera F1020411 or equivalent

S&F in repair Brass Chromium plated fancy type towel rail, 20mm dia, D type 600mm long between flanges including brass CP brackets complete all as specified and directed by Engr-In Charge.

S&F in repairs vitreous china white, appx size 160x160x90 mm soap dish , fixed to plugs with chromium plated brass screws.

S&F Toilet paper holder of stainless steel fixed by CP brass screw in wall complete all as specified and directed by Engr-In Charge.

S&F sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.

Taking up or down 15 mm dia GI tubing surface/concealed laid in wall/flooor/ceiling complete all as specified and directed by Engr-In Charge.

Taking up or down 20 mm dia GI tubing surface/concealed laid in wall/flooor/ceiling complete all as specified and directed by Engr-In Charge.

Taking up or down 25 mm dia GI tubing surface/concealed laid in wall/flooor/ceiling complete all as specified and directed by Engr-In Charge.

Cutting chases pinning in making good for Stone concete block or slab walls to facing where required and pointing in cement mortor 1:3 to ends or edges of concealed water tubing and similar work including making good cutting n exc 10cm girth complete all as specified and directed.

S&F in repairs 15 mm bore fancy type, chromium plated Stop valves / Angle cock screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specifed and directed.

S&F tubing,medium grade,15mm bore with all fittings fixed to walls and ceiling or laid in floors including cutting through walls and floors etc and their making good complete all as specified and directed.

S&F tubing,medium grade,20mm bore with all fittings fixed to walls and ceiling or laid in floors including cutting through walls and floors etc and their making good complete all as specified and directed.

S&F tubing,medium grade,25mm bore with all fittings fixed to walls and ceiling or laid in floors including cutting through walls and floors etc and their making good complete all as specified and directed.

Dismantling of PVC drain pipes of 75/100mm bore, including all fittings, jointed in cement mortar and taking out of trenches, if required and removing from site of work complete all as directed.

S&F PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints laid in floor complete all as specified and directed.

S&F PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints laid in floorcomplete all as specified and directed.

S&F PVC (SWR) bend with access door 110 mm bore complete all as specified and directed.

S&F PVC (SWR) bend 110 mm bore complete all as specified and directed.

S&F PVC (SWR) double (double Y) branch piece, with access door 110 mm bore.equal or unequal complete all as specified and directed.

S&F PVC (SWR) Branch piece single (Single Y) equal or unequal with access door 110mm bore complete all as specified and directed.

S&F PVC (SWR) 110mm bore vent cowl complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius with access door complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) junction single (Single T) equal or unequal with access door 75mm bore complete all as specified and directed complete all as specified and directed.

S&F PVC (SWR) 75mm bore vent cowl complete all as specified and directed.

S&F PVC (SWR) Branch piece single (Single Y) equal or unequal with access door 75mm bore complete all as specified and directed.

M&L for cutting holes for pipes for a superficial area exceeding 150 sqcm and not exceeding 400 sqcm in to or through brick walls built, in CM and making good in CM 1:3 or 1:2:4, type B1 all as specified and directed.

M&L for cutting holes for pipes for a superficial area exceeding 150 sqcm and not exceeding 400 sqcm in to or through stone walls built, in CM and making good in CM 1:3 or 1:2:4, type B1 all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving n exc 15 cm thickness ( below or above ground level) and removing ebris outside MD land complete all as specified and directed.

M&L for cement concrete type C-2, 1:3:6 (40mm graded aggregate) 75mm thick as in plinth protection, pavement etc and finished the surface even and fair.

Demolition of RCC n.exc 15cm thickness complete all as specified and as directed

S&F in repair PVC (SWR) 75mm dia multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and as directed

S&F in repair PVC (SWR) floor trap 100 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-In Charge.

S&F in repair PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-In Charge.

M&L for preparing new plastered surface of walls and applying two coats of cement base paint over a coat of primer including necessary scaffolding complete all as specified and as directed

M&L for 3 coat of white washing as in wall of newly plastered surfaces including preparations of surface etc. complete all as specified and as directed.

M&L for preparing new plastered surface of ceiling and applying three coats of white wash including necessary scaffolding complete all as specified and as directed.

M&L Complete removal of exiting treatment and applying three coats of white wash on walls complete all as specifed and as directed

M&L Complete removal of exiting treatment and applying three coats of white wash on ceiling complete all as specifed and as directed

S&F for framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders; framed balusters; walk ways; railings; framework of watertanks and similar work confirming to Fe-290, Gde E-165 complete all as specified and directed by the Engr-in-charge.

Hacking out old broken glass (any thickness ,size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips glazed with putty and removing materials from site of work all as directed by the Engineer-in-charge.

S&F for 4mm thick figured glass pin head type and glazing with oil putty in square not exc. 0.50 sqm in each pane complete all as specified and directed by the Engr-in-charge.

M&L for removing existing water proofing treatment of RCC roof on horizontal and vertical surfaces including taking out of old water proofing sheet and demolition of plaster and concrete or mudpushka of any thickness and cleaning the roof surface with wire brush and finally cleaned with wate and water proofing treatment on horizontal and vertical surfaces with applying of oil bound bitumen primer @ 0.20 Kg/Sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4.0 Kg/Sqm reinforced with non woven polyester matt weighing not less than 160 grm/Sqm having softening point not less than 150 degree centigrade, having tensile strength of 650 N/5cm and 350 N/5cm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch on application including minimum 10cm side over lap and 15 cm end lap torch sealed and applying a coat of blown grade @1.2 kg per sqm hot bitumen 90/15 over the membrane finished with solar reflective bituminus paint/primer @ 0.10 kg per sqm complete all as specified and directed by Engr in charge. Note : The rate includes remmoving debris outside MD land

M&L for 10mm thick plaster on concrete surfaces in cement mortar (1:3) on roof padding finished even and fair without using extra cement and with approved water proofing compound @ 3% by weight of cement or as per manufacture's instruction all as specified. (Note : WPC will be measured and paid seperately as supply only under relevant item)

Supply only integral water proofing compound

M&L for PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in roof/chajja padding for maintaining roof/chajja slope complete all as specified and as directed.

M&L for PCC (1:2:4) type B01 using 12.5mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamferted on edges complete all as specified and as directed.

M&L cutting out cracks to V-section in exisiting roof or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed.

M&L preparation of plastered or un plastered old decorated surfaces of ceiling by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying two coat of white wash all as specified and as directed.

M&L preparing of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L preparation of plastered or un plastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying one coat of white wash including necessary scaffolding complete all as specified and as directed.

S&F floor door stopper of aluminiumalloy body Overall length of cover plate 140mm and tongue, anodised, with hard drawn steel spring, fixed in floor

Demolition of brick work or stone masonry/ PCC block masonry built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facing dressed stone works and pre-cast concrete articles complete all as directed.

M&L for Pre-cast cement concrete block type C1 1:3:6 (20mm graded stone aggregate) masonry with solid blocks, 10 cm thick in width and setting in mortar 1:6 complete.

S&F trible layered Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I , 1000 Ltrs Capacity including dismantling existing 1000 Ltr water tanks complete all as specified and as directed.

S&F trible layered Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I , 500 Ltrs Capacity including dismantling existing 500 Ltr water tanks complete all as specified and as directed.

S&F in repair Ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball scrured for iron pipe of dia 20 mm bore complete all as specified and directed .

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore complete all as specified and as directed

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 25 mm bore complete all as specified and as directed

Demolition and breaking up drain pipes of 150mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar all as specified and directed.

Demolition of plain cement concrete in foundation/copings/ bed concrete of drain pipes in any position all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

Excavation in trenches not exceeding 1.5 meters wide and 1.5 meters in depth and getting out in any type of soil including cutting of roots any dia all as specified and directed.

Returning filling in inclding spreading, levelling, watering well ramming in layers not exceeding 25 cm thick all as specified and directed.

Removing excavated material to a distance not exceeding 50 meters and deposited where directed at level not exceeding 1.5 meters above the starting point.

M&L for plain cement concrete 1:4:8, type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete all as specified and as directed.

M&L for plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping bed plates, haunching benching ,water trough and the like including weathering, slightly rounded or chamfered angles and throating including use of necessary form work and finishing the surfaces even and smooth without using extra cement all as specified and as directed.

M&L for plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in surface channel, drains, all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc

S&F 150 mm bore Reinforced cement concrete pipes, class NP 3, laid and jointed complete with collars all as specified and as directed.

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregated as in bed to 150mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested all as specified and as directed.

M&L for 15mm thick rendering in cement mortar 1:4, on fair faces of brick work/concrete surfaces finished even and smooth without using extra cement including mixing of water proofing compound all as specified and as directed.

M&L Pre-cast cement concrete block masonry with solid blocks,in PCC 1:3:6 Type C1 (20mm graded aggregate) exc. 10 cm in width and setting in mortar1:6 complete all as specified and as directed

Cutting in to existing man holes for connecting new drains for internal dia of pipe 150mm, making good to pipe and rendering, cutting out existingbenching for and forming branch channel (1/2 round or 3/4 section) in cement mortar 1:2:4 type B1 smooth finished and reforming benching a srequired complete all as directed.

M&L for precast cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in cover slabs and the like, set in cement mortar 1:6 with plain fair faces complete with joints to match all as specified and as directed.

S&F Hight strength, deformed steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking and binding with mild steel wire (annealed) not less than 0.90mm dia all as specified.

Dismantling of plain or corrugated steel sheeting , an gauge, thickness including nainital or similar pattern roof coverings complete all as specified and as directed.

S&F Pre-Painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws as spefecied.

S&F steel work in tubular posts and roof trusses including special shaped washer etc completed using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St-240 (S&F) completed all as specified and as directed by the Engineer-in-charge.

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar and debris outside MD land complete all as specified and as directed.

Granite (of any type ) tiles 20mm thick machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including and polishing complete all as specified and directed.

Rounding to edges to granite slab one edge as in platform,steps or other similar occasion complete all as specified and directed.

Taking down steel window/ventilator (without taking off shutter from the frame) n.exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed by the Engr-in-charge.

S & F for powder coated anodised aluminium frame for doors,windows,ventilators with one or more rebates including cleat for fixing etc complete all as specified and directed.

S&F for 4mm thick figured glass pin head type and glazing with oil putty in square not exc. 0.50 sqm in each pane complete all as specified and directed by the Engr-in-charge.

M&L for 3mm thk wall care putty on walls complete all as specified and directed.

M&L for 3mm thk wall care putty on ceiling complete all as specified and directed by Engineer-in-Charge.

Taking down carefully copper/aluminium point wiring (light,fan, socket or power ) complete including its connected fitting/fixtures (ie holder, bulk head fittings, ceiling roses, fan regulators, switch , switch socket combination, FTL fitting, ceiling fans etc) and making good disturbed surfaces of wall roof etc complete all as specified and directed.

M & L Point wiring complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 1.5 sq mm nominal area, passing through heavy grade PVC conduit/casing capping of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 1.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall for mounting switches,switch socket combination, fan regulators etc.covered with 3mm thick electroplated hylam sheet top cover for housing switches, sockets, regulators etc. complete for one light/ fan/bell point controlled by one single pole 5 amps switch all as specified and as directed.

(a)One light point controlled by one single pole 5 Amps switch

(b)One fan point controlled by one single pole 5 Amps switch

(c )One switch socket out let point 5 Amps on same board with other switches

(d)One switch socket out let point 5 Amps on independent board

Supply and fixing inreplacement Piano type switch single pole 5 Amps one way 230 volts all as specified and as directed

Supply and fix inreplacement socket outlet 5 pin, 5 Amps, flush type, universal complete all as specified and directed.

M & L Point wiring complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 2.5 sq mm nominal area, passing through heavy grade PVC casing/capping conduit of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 1.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall , covered with 3mm thick electroplated hylam sheet top cover for housing 15 A switches, 15A sockets all as specified and as directed.

Supply and fixing inreplacement switch 15A flush type universal pattern 230 v all as specified and as directed

Supply and fixing inreplacement socket outlet 5 pin multi purpose 5/15 Amps flush type all as specified and as directed

Supply and fix ceiling rose surface bakelite 65x25mm, two to three termimals complete all as specified and directed.

Supply and fixing exhaust fan 300mm sweep working in AC single phase 900 RPM with louver shutter on wall with necessary fitting,bolt,nutsand washer connecting up with ceiling rose with 3 core flexible cable all as directed.Make Havells Model Turbojet SP or equivalent in Bajaj/Orient

M&L for necessary arrangement for making hole on stone wall in round shape with separate louvres shutter for exhaust fan 300mm sweep complete all as specified and directed.

Supply and fixing inreplacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete all as specified and directed.

M & L inreplacement sub main wiring with Two single core PVC insulated cable with copper conductor FRLS multistranded 1100 volts grade 2x4sqmm in and including heavy grade PVC casing and capping/PVC conduit and its accessories with fixing arrangements on surface, wall, floor or ceiling etc including 4 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC casing capping and two run of copper conductor together taken as one length for measuring unit length.

All as per serial item No 152 above but for 2x6 sqmm copper conductor cable 6 sqmm pvc insulated unsheathed copper earth continuity conductor.

Supply and fix inreplacement sheet metal enclosure double door type for DBs for mounting of MCB for 240V, 8 way with 200 Amps rated Bus bar, single pole & neutral, complete all as specified and directed.

Supply and fix inreplacement sheet metal enclosure double door type for DBs for mounting of MCB for 240V, 4 way with 200 Amps rated Bus bar, single pole & neutral, complete all as specified and directed.

Supply and fix inreplacement miniature circuit breaker (MCBs) SPN, 240 volts, 10KA, 6 to 32 Amps c series complete all as specified and directed.

Supply and fix inreplacement miniature circuit breaker (MCBs) SPN, 240 volts, 10KA, 40 to 63 Amps c series complete all as specified and directed.

Supply and fix inreplacement miniature circuit breaker (MCBs) single pole, 240 volts, 10KA, 6 to 32 Amps C series complete all as specified and directed.

Supply installation and testing water heater storage type single phase 230 volt 25 ltrs capacity and grouting 4 nos nut & bolts 90 mm long 12mm dia on wall for fixing complete all as specified and directed.

Supply and fix GI pipe 15mm dia medium grade with all fittings and fixed complete to wall and ceiling or Laid in trenches including drill hole on wall for out going connections from the geyser all as specified

S&F bib taps cast copper alloy with clutch or butterfly handle screwed for GI pipe 15mm dia chromium plated fancy type.

Cutting existing steel tubing for alteration or additions all as specification and directed.

S&F PVC connections 15mm size with PTMT nut of length 300mm complete all as specified and directed.

S&F Stopcock cromium plated screwed down High pressure with crutch or butterfly handleb screwed both ends for iron pipe or for union completebib taps cast copper alloy with clutch or butterfly handle screwed for GI pipe 15mm dia complete

M/S Suresh Raju

K V RAJANNA

YASHASVI BUILDERS