Construction of Bridge cum Barrage across Halla near Kempawad village in Kagawad Taluka, Dist-Belagavi (4702/2025-26)

Amount

Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge.(Ref : Para 1.1 & tech Spn 1.4.1 of detailed Specification)

Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge.(Ref : Para 1.1 & tech Spn 1.4.1 of detailed Specification)

Preparing foundation bed for masonry or concrete in rock portion by removing all loose material by wedging / chiselling and disposing off the same as directed and cleaning the surface with air and water jet including cost of all materials, machinery, labour and all other ancillary operations (Organisation specific) etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification)

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid inlayers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 4.8 to 4.8.1 to Sec II C 3.1 to 3.4 of detailed Specification) Sub structure of Bridges

Providing and fixing M.S. Channel frame to suite the suitable size of gates. The side channels with suitable height with hold fasts 12mm dia and 0.5m long M.S. Bar at 0.50 m c/c with suitable size bottom channel including cost of all materials including two coats of anti corrosive paint over a coat of primer etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Relevant IS & Para 4.1 & 4.2 of detailed Specification)

Description of item (with brief specification and reference to Book of Specification)

Amount

Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge.(Ref : Para 1.1 & tech Spn 1.4.1 of detailed Specification)

Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge.(Ref : Para 1.1 & tech Spn 1.4.1 of detailed Specification)

Preparing foundation bed for masonry or concrete in rock portion by removing all loose material by wedging / chiselling and disposing off the same as directed and cleaning the surface with air and water jet including cost of all materials, machinery, labour and all other ancillary operations (Organisation specific) etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification)

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid inlayers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 4.8 to 4.8.1 to Sec II C 3.1 to 3.4 of detailed Specification) Sub structure of Bridges

Providing and fixing M.S. Channel frame to suite the suitable size of gates. The side channels with suitable height with hold fasts 12mm dia and 0.5m long M.S. Bar at 0.50 m c/c with suitable size bottom channel including cost of all materials including two coats of anti corrosive paint over a coat of primer etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Relevant IS & Para 4.1 & 4.2 of detailed Specification)

Providing, Supplying and fixing M.S. gates of size 1.62m x 1.2 with 6mm thick M.S. plate with and stiffeners (2 Nos) horizontal bracing 6 Nos. of ISMC 75*40 including providing rubber guard of ISA 20*4 for providing rubber of approved Quality for bottom & two sides fixed to grove of M.S. gate of size 25 mm . 25mm with machine screw nuts and bolts of size 6mm dia & 35mm long and providing 16mm dia MS bar handles (4 Nos) suitably welded to horizontal bracing including two coats of anticorrosive bituminous paint over a cost of primer complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Relevant IS & Para 4.1 & 4.2 of detailed Specification)

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour, rolling, water,a ll materials, usage & all other appurtenaces required to complete the work. etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref :Para 3.2 to 4.3.1 & Para 2.4.1 to 2.4.2 of detailed Specification)

Providing and constructing 450 mm thick hand packed rough stone revetment consisting of 300 mm thick rough stones with 400 to 450 mm long through stones at 1.5 m c / c over a backing of 150 mm thick 40 mm down graded coarse aggregate layer including cost of all materials, machinery, labour, laying to specified slope, wedging with chips, finishing etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 4.3 to 4.3.1 and Sec II C3.4 (i) of detailed Specification)

Providing and constructing 75 mm dia PVC pipe weep holes for concrete / masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in 1 : 4 proportion including 100 mm thick sand backing at the junction of wall and soil back fill, cost of all materials, machinery, labour etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

Providing and fixing tarfelt expansion joint filler board for cement concrete lining of canal including cost of all materials, labour and all other ancillary operations complete etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) 20 mm thick 150 mm depth

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete) with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) (0 to 50 Mtrs)

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete) with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) (51 to 100 Mtrs)

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete) with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) (101 to 150 Mtrs)

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete) with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) (151 to 200 Mtrs)

Description of item (with brief specification and reference to Book of Specification)

Amount

Preparing foundation bed for masonry or concrete in rock portion by removing all loose material by wedging / chiselling and disposing off the same as directed and cleaning the surface with air and water jet including cost of all materials, machinery, labour and all other ancillary operations (Organisation specific) etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification)

Providing and fixing 25 mm dia 3 m long cold twisted defomed steel dowel bars with one end driven into 38 mm dia 1.50 m deep hole drilled in bed rock and other end provided with L- bend for embedding in concrete / masonry of over flow / non-over flow blocks and other appurtenant works including cost of all materials, machinery, labour, drilling and cleaning hole, filling hole with thick cement slurry, driving anchor rod and all other ancillary operations etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 6.3 to 6.4 of detailed Specification)

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 4.8 to 4.8.1 to Sec II C 3.1 to 3.4 of detailed Specification) Dam & Allied Works

Providing and fixing M.S. Channel frame to suite the suitable size of gates. The side channels with suitable height with hold fasts 12mm dia and 0.5m long M.S. Bar at 0.50 m c/c with suitable size bottom channel including cost of all materials including two coats of anti corrosive paint over a coat of primer etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Relevant IS & Para 4.1 & 4.2 of detailed Specification)

Filling clayey soil between two rows of sand bags placed for forming ring bund including tamping, plugging leakage points etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

Description of item (with brief specification and reference to Book of Specification)

Amount

Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge.(Ref : Para 1.1 & tech Spn 1.4.1 of detailed Specification)

Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge.(Ref : Para 1.1 & tech Spn 1.4.1 of detailed Specification)

Preparing foundation bed for masonry or concrete in rock portion by removing all loose material by wedging / chiselling and disposing off the same as directed and cleaning the surface with air and water jet including cost of all materials, machinery, labour and all other ancillary operations (Organisation specific) etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification)

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid inlayers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 4.8 to 4.8.1 to Sec II C 3.1 to 3.4 of detailed Specification) Sub structure of Bridges

Providing and fixing M.S. Channel frame to suite the suitable size of gates. The side channels with suitable height with hold fasts 12mm dia and 0.5m long M.S. Bar at 0.50 m c/c with suitable size bottom channel including cost of all materials including two coats of anti corrosive paint over a coat of primer etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Relevant IS & Para 4.1 & 4.2 of detailed Specification)

Providing, Supplying and fixing M.S. gates of size 1.62m x 1.2 with 6mm thick M.S. plate with and stiffeners (2 Nos) horizontal bracing 6 Nos. of ISMC 75*40 including providing rubber guard of ISA 20*4 for providing rubber of approved Quality for bottom & two sides fixed to grove of M.S. gate of size 25 mm . 25mm with machine screw nuts and bolts of size 6mm dia & 35mm long and providing 16mm dia MS bar handles (4 Nos) suitably welded to horizontal bracing including two coats of anticorrosive bituminous paint over a cost of primer complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Relevant IS & Para 4.1 & 4.2 of detailed Specification)

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour, rolling, water,a ll materials, usage & all other appurtenaces required to complete the work. etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref :Para 3.2 to 4.3.1 & Para 2.4.1 to 2.4.2 of detailed Specification)

Providing and constructing 450 mm thick hand packed rough stone revetment consisting of 300 mm thick rough stones with 400 to 450 mm long through stones at 1.5 m c / c over a backing of 150 mm thick 40 mm down graded coarse aggregate layer including cost of all materials, machinery, labour, laying to specified slope, wedging with chips, finishing etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 4.3 to 4.3.1 and Sec II C3.4 (i) of detailed Specification)

Providing and constructing 75 mm dia PVC pipe weep holes for concrete / masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in 1 : 4 proportion including 100 mm thick sand backing at the junction of wall and soil back fill, cost of all materials, machinery, labour etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

Providing and fixing tarfelt expansion joint filler board for cement concrete lining of canal including cost of all materials, labour and all other ancillary operations complete etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) 20 mm thick 150 mm depth

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete) with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) (0 to 50 Mtrs)

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete) with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) (51 to 100 Mtrs)

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete) with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) (101 to 150 Mtrs)

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete) with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) (151 to 200 Mtrs)