WBPWD/AE/BMCESD/NIeQ-04/25-26

Amount

Supply & Delivery of following size 1.1 kV.gr.XLPE insulated 1100V Grade as per IS 7098 (part 1) 1988 armoured sheathed Aluminium conductor cable. [Make - Polycab/ Havells/ KEI/ Gloster or as per choice of EIC]-[NS]

4 core 50 sqmm

4 core 25 sqmm

Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for [F-1]

4 core 50 sqmm[3-a]

Laying of cable as below, on existing Cable Tray and binding with suitable size GI wire.[F-3]

4 core 50 sqmm[6-i]

Laying of cable on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting [F-1]

4 core 50 sqmm [2-c]

4 core 25 sqmm [2-b]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cable [F-4]

4 core 50 sqmm [7-c]

4 core 25 sqmm [7-b]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials [F-5]

4 core 50 sqmm [8-b-vii]

4 core 25 sqmm [8-b-v]

Supplying & fixing 4 bar 415 V, 100/125 A sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991) Dimension of Cu. Bars [85mm long].4 x 15x3mm Dimension of Sheet Metal Box 500x150mm. [D-13-b]

Supplying and fixing 415V, 250 A TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc. [D-2/3-a]

Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required 150 mm x 100 mm x 65 mm[ E-4-12-b]

Supply & Fixing bakelite / perspex top cover on existing Inspection board by Brass screws[E-5-13-c]

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.[D-13-22]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required[E-14]

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC[1-a-i]

Supply and fixing Mini 0.5 watt (conventionally known as zero watt) night lamp-[NS]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as By ISI-Medium GI pipe:[G-1-2-a]

Dismantelling labour charges of existing 50 KVA Diesel Generator from Anamoy SSW with necessary arrangements.

Transportation cost for carrying 50 KVA Diesel generator from Anamoy SSW to TCCC under BMCH

Installation chages fo 50 KVA Diesel Generator at TCCC with necessary temporay foundation and arrangements

Supply of Diesel oil for DG set through out the year as per requirement

Charges for Transportation & Pouring of Diesel Oil for DG Sets with in the Campus of BMCH by company own vehicle and fuel pump and labour as per direction of P.W.D

Rate to be quoted will be inclusive of all taxes incl. GST. No other additional charges will be applicable in addition to the quoted rates.

M/S. DAS ELECTRIC CO. (BID ID -6531348)

SAHA ELECTRICAL ENGINEERS (BID ID -6531664)