Construction of Block Office Buildin Nahan Distt Srimour SH Providing Electrical installation therein

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit, with 2-way modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.

Supplying and fixing electrical switch board, having 4 No. of 5/6 amp. Modular Switches and Modular Socket on suitable size of G.I. modular boxes of 12 modules (205mmx135mmx60mm) deep ( nominal size) on surface or in recess with suitable size along with modular base and cover plate for modular switches in the front including providing and fixing 4 No. 5 pin 5/6 amp modular socket outlet and 5/6 amp modular switch, connection, painting etc.as required. (For Light Plug/Computer Points)

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole 6 Amp. Cat-A.

Single pole 16 Amp. Cat-A.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Double pole. 40 Amp.Cat-A.

Double pole. 63 Amp. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

63 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-12 way

Supplying & erection of wall/floor mounted MCCB 100 Amp. with bus-bar L.T. Panel approx. size: 850(H)x450(W)x250(D)mm, suitable for Indoor applications, having Main Incomer DN0-100D-100 Amp. 36KA (L&T) cat No.CM97919OOK2OG with thermal magnetic release O/L & S/C protection, Digital VAF Metering (L&T) cat No.WL411010OOOO showing voltage,current frequency with suitable C.T., R-Y-B Indicating lamp (L&T) with seprate controling MCB SP 6 amp., 200 Amp. AL Busbar, fabricated with 16-SWG CRCA sheet compartmentalized type enclosure, IP:42 indoor protection powder coating shade: RAL 7032-Siemens Grey as per design & drawing including the cost of all accessories, making connections, testing and commissioning etc. as required to the best satisfaction fo Engineer-in-Charge.

Supplying & erection of wall/floor mounted MCCB 200 Amp. with bus-bar L.T. Panel approx. size: 850(H)x450(W)x250(D)mm, suitable for Indoor applications, having Main Incomer DN2-250D MCCB-4P 200 Amp. 36KA (L&T) cat No.CM92109OOP1OG with thermal magnetic release O/L & S/C protection, Digital VAF Metering (L&T) cat No.WL411010OOOO showing voltage,current frequency with suitable C.T., R-Y-B Indicating lamp (L&T) with seprate controling MCB SP 6 amp., 200 Amp. AL Busbar, fabricated with 16-SWG CRCA sheet compartmentalized type enclosure, IP:42 indoor protection powder coating shade: RAL 7032-Siemens Grey as per design & drawing including the cost of all accessories, making connections, testing and commissioning etc. as required to the best satisfaction fo Engineer-in-Charge.

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x1.5 Sq. mm.

2x2.5 Sq. mm.

2x6.0 Sq. mm.

2x10 Sq. mm.

Wiring for circuit/sub-main with 4x2.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.2.5 Sq.mm.(4X2.5+2X2.5) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Providing and installation of following type of Ultra slim decorative LED Batten with extruded aluminium heat sink, with antiglare polycarbonate diffuser and energy efficient constant current, integral electronic driver, suitable for input voltage: 220-240 V, 50/60 Hz, complete with all accesories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required, with two year warranty. Make: Philips, Twinkle, GE or any other approved by Engineer-in-Charge.

LED Batten Light 20 Watt.

Providing and installation of following type of LED MIRROR LIGHT 10 Watt. Extruded Aluminium batten available in 2ft run length with multiple lumen packages with minimum 2 year warranty suitable for input voltage: 220-240 V, 50/60 Hz, complete with all accesories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required, Make: Twinkle, Philips, GE or any other approved by Engineer-in-Charge.

LED Mirror Light 10 Watt. (length 2 Feet)

Providing and installation of following type of surface/recess mounting round/square LED Downlight finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including making connections, testing and commissioning etc. as required with Two years Warrenty. Make: Philips, Twinkle, GE or any other approved by Engineer-in-Charge.

LED Downlight 18 Watt.

Providing and installation of following type of Surface/Recess mounting Square type LED Panel Light, powder coated housing made of CRCA sheet, suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including making connections, testing and commissioning etc. as required. Make: Twinkle, Philips, Syska, GE or any other approved by Engineer-in-Charge.

LED Panel Light 36 Watt.(Size:- 2' x 2' feet)

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Providing & fixing the louvers/shutters complete with frame for exhaust fans of all sizes as required:-Shutter for Exhaust Fan 12 Inch.

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-

Ceiling Fan 1400 mm sweep, Category-A

Providing and installation of Recess type 2 No's LED RED-GREEN signal Light 3-Watt. wall mounted fixture with electronic driver and opaque diffuser, suitable for indoor applications, complete with all accessories, including making connections, testing and commissioning etc. as required with Two year warrenty. Make: Twinkle, Philips, GE any other approved by Engineer-in-Charge.

LED RED-GREEN Signal Light 3-Watt.

Providing and installation of following type of LED Street light fitting made of pressure die cast aluminium housing powder coated with weather proof gasket ensuring IP-66 protection complete with all accessories including making connections, testing etc. as required with two years warrenty Make: Twinkle, Philips, GE or any other approved by Engineer-in-Charge.

LED Street Light 45 Watt

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:-

40 mm dia. G.I. pipe, heavy class

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:-

25 Liter capacity water heater (Cat-A)

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:-

Armoured cable 150 sq. mm (3.5 core)

Supplying and fixing of following size Jindal make G.I. Pipe Heavy Class direct in ground to be laid 1-meter below the ground level along with all accessories and also refilling the trench etc. of the required size : -

65-mm ( 2½ ") dia. G.I. Pipe, Heavy class

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required.

Rajesh Kumar Jaswal

SANJAY AGGARWAL