REPAIR TO BOUNDRY WALL, SECURITY WALLS, SECURITY FENCING, BRICK WORKS STONE MASANORY AND OTHER CONNECTED WORKS AT DMDE AND CE RND AREAS UNDER AGE B/R RND II SECUNDERABAD

Amount

Demolition Brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M & L for walling of random rubble stone masonry, un-coursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 complete all as specified and as directed.

M & L for walling of random rubble stone masonry but except stones un-coursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 complete all as specified and as directed.

M&L Plain for Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work.

M & L for Raised pointing to random rubble masonry coursed or brought up to courses in cement mortar 1:3 complete all as specified and as directed.

Raking out joints to square rubble masanory, coursed or uncoursed and M & L for Raised pointing in CM 1:3

M & L for Brick work with fly ash sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) including raising height of existing manholes complete all as specified and as directed.

M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick/Stone or concrete surfaces, finished even and smooth without using extra cement complete all as directed.

M&L Non skid cermic coloured tiles 6 to 7mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick screed bed in CM 1:6 including dismantling old tiles complete all as specified and as directed

M&LNon skid cermic coloured tiles 6 to 7mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in CM 1:6 including dismantling old tiles complete all as specified and as directed

M&L for glazed ceramic tiles of size 300x200x7mm thick on vertical surfaces such as skirting/dado ,jointed in neat cement slurry and pointed with white or coloured cement to match the colour of the tiles laid over rendering 10mm thick in cement mortar 1:4 as backing coat incluidng dismantling old tiles complete all as directed.

S&F vitrified tiles 10mm thick any shade (Square/rectangular) polished area of each tiles not exceeding 0.36 sqm in floors etc laid in floor , set and jointed with 15mm thick screed bedding in CM 1:6 and pointed in white cement or coloured cement to match with colour of tiles including dismantling old tiles complete all as specified and directed by Eng-in-charge.

All as per item No 12 above but on vertical surfaces such as skirting (Skirting is to be flush with wall) including taking down old terrazo tiles and plaster and 15mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces as backing coat for tiles complete all as directed.

M & L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including cutting grooves and nosing laid over 15mm thick screed bed in CM 1:4 including dismantling old work complete all as specified and directed.

S&F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape hand rail straight portion , drilled and contersunk for balusters , nosing to steps, struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire etc flat iron fillets ( for securing chain link fencing ) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 including dismantling old steel work complete all as specified and directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including dismantling old steel work complete all as directed

M&L for Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, including dismantling old steel work complete all as directed

S & F Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc., including taking down the existing wire complete as directed.

M&L broken glass coping 25mm thick in CM 1:3 on top of wall including demolition of old coping complete all as specified and as directed.

M&L Prepration new steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified.

Taking down wood/Steel chowkats or frame with shutters (without taking off shutters from frame) but each not exceeding 1.50 Sqm

Taking down wood/Steel Chowkats or frames with shutters exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame)

Supply & fixing of UPVC windows or UPVC framed portion 3 track 3 panel sliding window with two glazed and one wire mesh sliding shutters of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature complete all as specified.

Supply & fixing of UPVC windows/ventilators with top hung shutters made out of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, with peg stay of suitable size to keep hung shutter in open position, with temper proof screws with and including glazed shutters fixed with 3 mm thick frosted sheet glass complete all as directed

M&L for complete removal of existing treatment from surfaces of walls/ ceiling, washing with water and applying two coats of Acrylic emulsion paint as per manufacturers instructions over a coat of primer over two coats of putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. Note:- (i)The putty surface should be finished even smooth and dent free before application of primer, stage passing shall be taken for each building at every stage. ii) Crack should be open and filled with DR. FIXIT 201 Crack X Paste.

M&L for preparation of old decorated surface of exterior wall by removing existing treatment and washing with water and applying two coats of exterior antifungal acrylic emulsion paint as per manufacturers instructions over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Make:- APEX of ASIAN PAINT/ WEATHER COAT SMOOTH (BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC(DULUX) Note:- i) Paint work should be carried out by Authorised applicator with brand waranty. ii) The work carryout upto 4 story bldgs and rates are incl necessory eqpt and Scaffolding.

S&F MS framed work as in tubular trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc fixed in position as specified and including dismantling old steel work complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating AZ-150 GI based corrugated steel sheet 0.50mm thick of any colour (ISI Marked) having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating AZ-150 GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges and valley gutters, fixed with self tapping screws as specified

M&L Prepration new steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified.

M&L for mild steel screw bolts (machine made) and anchor bolts etc with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long, dia of neck 5 to 10 mm complete fixed in position all as directed

Material and labour providing reinforced Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in columns,pillars etc all as specified and as directed.

Material and labour use & waste of form work to sides of pillars, posts, struts, piers, columns (Square or rectangular) and stanchions. for rough finished surfaces of concrete, complete all as specified and as directed

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness below or above ground level, removal of rubbish and debris outside MOD land complete all as directed.

M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in sub base of floors complete all as specified and as directed.

M&L for chequered cement concrete tile machine pressed PU coated with grey cement and pigment of size 300x300x19/20mm laid over screed bedding layer 15 mm thick in CM 1:6 complete all as specified and as directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregates) , nexc 100 mm thick as in levelling course over roofs incl demoition of old cemnt concrete including cleaning/removal of vegetation,plants/ tree cutting over roofs,trimming of branches obstructing the work complete all as specified and as directed

Ravi Enterprises

M/S PAVANI ENTERPRISES

SM CONSTRUCTIONS