SPECIAL REPAIR OF 03 X COOK HOUSE AND DINING HALL BLDG N0 P-575 577 AND 579 OF 10 JAK RIF AND STAFF QTRS OF BLDG NO P-6 FH AND FC AND P-9 FH AND FC IN ZONE -III AREA UNDER GE (S) JAIPUR AT JAIPUR MIL STN

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding( but not backing) , removing serviceable tiles to store and rubbish off the primises complete all as specified and directed.

M&L for machine cut mirror polished kota stone slab flooring 20-25mm thick over including 25 mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment dto match the shade of the slab including round nosing at corners, rubbing and mirror polishing complete all as specified and directed.

M&L for Granite 20 mm thick (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) 15 mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and rounding the edges complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surface of size 300x450mmx7mm thick on wall etc in the combination of light and dark shed concept , set & jointed in neat cement slurry & pointed in white/coloured cement to match over 10mm thick plaster in cement mortar (1:4) Pattern and colour complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick(Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or colour cement to match incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick(Square/rectangular) k area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

All as per item no 8.00 avove but on Vertical surface such as Skirting/ dado etc including 15 mm thick Cement plaster in CM ( 1:4) on stone masonry surface or other than fair face of Brick masonry and finished fair and even complete all as specified and directed.

M&L for cement concrete in sub base type B-1 1:2:4 (20mm graded aggregate) 25mm thick complete all as specified and directed.

Taking down cement plaster, any description on brick or stone walls, etc. incl. raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) complete all as specified and directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) complete all as specified and directed.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed.

M&L for cement plaster 1:6 of dubbing out average 20 mm thick with chiken wire mesh on irregular face of walls complete all as specified and directed.

M&L for cement plaster 1:4 of dubbing out average 20 mm thick with chiken wire mesh on irregular face of walls complete all as specified and directed.

M&L for preparation of new internal plastered surfaces and applying two coats of oil bound distemper of approved shade/tint over a coat of Birla wall care putty on walls complete all as specified and directed.

M&L for preparing new plastered surfaces of external walls and applying two coats of weather proof paint (Exterior Acrylic Emulsion Paint) over a coat of 1 mm thick wall care putty and and over a coat of primer all as specified and directed with all scaffolding arrangement or working platform complete all as specified and directed.

M&L for complete removal of existing surfaces of walls, prepare the surface of wall and applying two coats of oil bound distemper over a coat of primer with 1coat of Birla wall care putty complete all as specified and directed.

M & preperation of new plastered surfaces of wall and applying two coats of cement base paint over Priming plastered and other surfaces with alkali resistant priming paint on walls complete all as specified and directed.

M & L complete removal of existing treatment of wall and applying two coats of cement base paint over Priming plastered and other surfaces with alkali resistant priming paint on walls complete all as specified and directed.

M&L for Complete removal of existing treatment, preparing surface by sand paper to obtain truely smooth surface, and applying two coats of weather proof paint exterior emulsion paint by roller application over water based akali resistant priming paint for external wall with wall care putty complete all as specified and directed.

M & L preparation of new plaster surface of ceiling and applying two coats of distemper oil emulsion on ceiling , white or tinted on ceiling complete all as specified and directed.

M & L preparation of old surface of ceiling and applying one coat of distemper oil emulsion on ceiling , white or tintedon ceiling complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 75 mm thick PCC type C-1 (1:3:6) using 20mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm but n exc 2.00 sqm each complete all as specified and directed.

S & F Factory made 35 mm thick, 2nd class HW rail and style, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30mm thick 2nd class hard wood factory made Glazed and skelton shutters open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain chamfered / rounded fitted without & mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I Section 8 Clause 8.2 (a) supplied & fitted to chowkats complete all as specified and directed.

S&F 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 Size of hinges 100 mm complete complete all as specified and directed.

S&F Aluminium handles, 150mm long cast type, anodised complete all as specified and directed.

S&F Stainless steel handles, 150mm long complete all as specified and directed.

S&F 0.63 mm nominal dia of wire and average width of aperture 1.40 mm galvanised mild steel wire cloth and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repairs 0.63 mm nominal dia of wire and average width of aperture 1.40 mm galvanised mild steel wire cloth and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or grith and applying two coat of synthetic enamel paint on wooden surfaceover one coat of pink primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm width or grith and applying one coat of synthetic enamel paint on steel surface complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and directed.

S&F in repair (WHB) vitreous China wash basin white, flat back,size 630X450 excluding taps,waste chain and plugand porcelain stopper including cutting for pinning in complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white flat back size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets, CP coupling , PVC waste pipe, complete all as specified and directed.

M&L CP cast copper alloy bib taps two way with wall flange and areator fancy type of 15 mm bore quarter turn fixed in repair complete all as specified and directed.

S&F in repair 15 mm bib taps fancy type, long body, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repairs PVC connection 15mm bore with 2 Nos PTMT nuts, 45cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe complete all as specified and directed.

S&F in repair Chromium plated angle stop cock with wall flange screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair 15 mm bore complete all as specified and directed.

S&F fancy type chromium plated stop valve 15mm, . copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions in repair complete all as specified and directed.

S&F in repair fancy type chromium plated Stop valves 20 mm bore, copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

Demolition of old existing unserviceable EWC seat and S&F vitreous china wash down water closet pan ( Pedestal pattern ),white including connection to drain (or outgoing pipe) and to flushing pipe,anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern,10 Lits capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F Waste fittings 32mm bore, brass, CP for glazed ware sinks, basins, etc. with long screwed shanks & fly-nuts, flange end bedded in red lead cement & other end fixed in repair complete all as specified and directed.

S & F PVC Grating doom 100mm dia PTMT (Min Weight 25 gms) fixed in repairs complete all as specified and directed.

M&L PVC (SWR) multi floor trap diametar of outlet in 75mm complete all as specified and directed.

Dismantling of old U/S grating and M&L of PVC Nahani / floor trap and square in size of 100X100 mm including MS chromium plated grating 125mm dia of weight not less than 50gm for floor trap / Nahani trap complete all as specified and directed.

S&F in repair towel rail 450mm long of PTMT fixed with and including chromium plated brass screw and wooden /plastic cleats (min wt 170 gms) complete all as specified and directed.

S&F in repair 600mmx450mm bevelled adges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and directed.

S&F in repair of 15mm pillar taps of cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and flynut screwed for iron pipe and fixed complete all as specified and directed.

M&L for CP wall Mixer fixed in repairs with flange & 115 mm long bend pipe forover head shower non Telephonictype with connecting legs wall flanges and crutch etc quarter turn 15mm bore for mixing hot & cold water complete all as specified and directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter with particale board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. complete all as specified and directed.

Hacking out old broken glass any thickness size, quality or description from wooden/steel frames fixed with wooden beads/metal pinning and S&F 4.8 mm thick sheet glass in squares not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal frames etc) complete all as specified and directed.

S&F Sheet glass 4.80mm thick , ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof vering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L Cement concrete 40mm type B-0, 1:2:4 (12.5mm graded aggregate) and Finishing cement concrete surface even and smooth using extra cement complete all as specified and directed.

The surface shall be painted with one coat of polymeric primer @ 0.30 Kg per sqm, conforming to IS : 3384. A layer of APP based polymeric membrane, 3 mm thick (min), weighing not less than 3.5 Kg/m2 reinforced with polyster non woven fabric ( weighing not less than 150 gms/ Sqm). Application of polymeric membrane shall be by torch application all as per manufacturer instructions.and one one coat of bitumen @ 1.2 kg/ sqm befor application of aluminium paint over APP membrane complete all as specified and directed.

M&L of 18 mm thick wood plastic composite (WPC) panel fixed in repair with suitable pins screws as in Shelf and shutters and partiation of kitchen cabnait partiation of cabnait in wood grain colour, half round edge complete all as specified and directed.

S & F Auto close hinges,stainless steel, bright finish or electro galvanised fixed in repair complete all as specified and directed.

S&F magnetic catch Ultra slim (with screws) for kitchen cabinate shutter as per approved sample complete all as specified and directed.

S&F brass handle of 100mm size cast type, polished bright complete all as specified and directed.

S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe pipe etc complete all as specified in SSR Part -I complete all as specified and directed.

S & F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe pipe etc complete all as specified in SSR Part- I complete all as specified and directed.

S & F Ball brass valves 20mm bore high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

M&L for providing circular, raised platform of height 20 cm below the tank and base 15cm more than the external dia of thank of PVC cylindrical water tank of capacity 500/1000 liters using PCC 1:3:6 type C1 using 20mm graded stone aggregate with smooth finish complete all as specified and directed.

S&F in repair CP Soap dish holder complete all as specified and directed.

S&F PVC (SWR) single socket 75mm bore in any length with or without ears laid in trenches or floor including taking down existing pipe complete all as specified and directed.

S&F PVC (SWR) single socket 110mm bore in any length with or without earslaid in trenches or floor/wall including taking down existing pipe complete all as specified and directed.

S&F PVC (SWR) single socket 75mm bore in any length with or without ears with cement joints fixed to walls including taking down existing pipe complete all as specified and directed.

S&F PVC (SWR) single socket 110mm bore in any length with or without ears with cement joints fixed to walls including taking down existing pipe complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm dia complete all as specified and directed.

S&F PVC (SWR) bends any radius 100 mm dia complete all as specified and directed.

S&F PVC (SWR) Vent cowl 100mm dia complete all as specified and directed.

Taking down Chowkhats or frames exc. 1.5 sq. m but not exc 4.0 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

MS stainless steel curtain Rod, 25 mm with fixing brackets, stops, rollers etc. fixed in repair but Length of curtain Road exc 1. m but not exc 2.0m complete all as specified and directed.

S & F 100mm Mortice latch with two levers (vertical Type), brass body and fixed in repairs complete all as specified and directed.

S&F in repairs Powder coated Anodised aluminium frame for doors, windows,ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F in repairs Anodised aluminium door of Powder coated (minimum thickness of powder coating 50 micron) shutters aluminium section weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges anodised alumnium snap beading, screws etc complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for Chipping of plaster and unsound/weak concrete material till reinforcement bars are exposed from slabs, beams, columns etc. with standard power driven percussion type or pneumatic chisel of standard make as directed by Engineer incharge including tapering all edges, making square shoulders of cavities etc complete and disposal of debris up for all lifts and leads . ii) Cleaning of concrete surface and reinforcement rust of by rust remover, including application of zinc rich coatings over rebar after rust removal process M & L For applying bond coat of epoxy bonding agent & cement in 1:1 ratio for bonding old and new concrete plaster on damaged surfaces, applying polymer modified mortar in CM 1:3 including mixing of polymer latex additives up to 60mm thickness (Chajjas fins, border etc) (i) Qty of polymer to be used 15% by weight of the cement or as per manufacturer instruction. (ii) Use of electrical mixer to get the homogeneous dough on bond coat surfaces. (iii) Polymer modified plaster to be applied in layers of 15mm To Achieve required thickness repeat this step after 24 hrs as Required. (iv) Keep the surfaces moist using water fog for 5 to 7 days etc complete all as specified and as directed. (v) Rate shall be inclusive of all necessary scaffolding for building height uptp two storey complete all as per specified and directed by Engineer-In-Charge. (Note :- work is requiredto be carried out in facias of building & as per site requirement).

Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised 15mm bore steel water tubing mdeium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised 20mm bore steel water tubing mdeium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions complete all as specified and directed.

S&F vitreous china white half stall type urinal flat back, including providing and fixing plug bedding against wall in cement mortar 1:2, with grating, CP Urinal spreader and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia complete all as specified and directed.

S&F in repairs bathroom Glass corner of best quality (as per sample) complete all as specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

M & L for cement concrete ( 1:2:4 ) type B2 using 40 mm graded stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified and directed. Note : Forming fair finished channel for drain using extra cement will be measured and paid for separately.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends complete all as specified and directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel( 1/2 round or 3/4 section ) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 150 mm bore pipe complete all as specified and directed.

M&L for granite 18 to 20mm thick as in steps ,pillars, Jambs, counter slabs of WHB (of any type) work (table rubbed and polished) in cooking plate forms, counter of WHB and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.

S&F MS holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 including necessary welding etc. and fixed in position complete all as specified and directed.

Cutting holes in stone / brick walls built in CM for inserting hold fast & making good dismantled portion in CM (1:3) depth of embaded portion of holdfast n. exc half brick complete all as specified and directed.

S & F framed work as in doors or gates of angle or other section as chowkhat or shutters, tie bar, hold fast, guard bars, cooler stand, brackets etc and fixing complete Fe 290 (Gde-E-165) complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl one side face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F aluminium anodised floor door stopper overall length 140 mm double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S&F Gusset Plate or single stanchions, built up of one beam or channel section with flange plates, caps, bases splices, angle brackets complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 complete all as specified and directed.

M&L Powder Coated (minimum thickness of powder coating 50 micron) Anodised aluminium window, door and ventilator shutters, fixed/ sliding without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws handle, tower bolt and stopper etc. complete all as specified and directed.

S&F Stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, complete all as specified and directed.

M&L for Walling of random rubble Stone, uncoursed as well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

M&L Brickwork with subclass ‘B’ burnt bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L Sand stone slabs 50 mm thick in cement mortar 1:4 complete laid in platform or roof covering etc complete all as specified and directed.

M&L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick backing coat in CM 1:3 complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base to floor complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for designer rubber moulded Chequered cement concrete tiles of approved color 30cmx30cmx 25mm thick , set , jointed and pointed in neat cement slurry in floor with grey cement and pigment to match over 15mm thick screed bed in CM(1:4) complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the requred line,level and curvature, jointed to the requred line,level and curvature, jointed with cement mortar 1:3 (1 cement 3 coarse sand), including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5mm ), including making drainage opening opening wherever required complete all as specified and directed.

Demolition of existing PCC in roof covering, kerbs, roof kerbs, benching, coved fillets upto mother slab of roof etc including old decayed water proofing treatment of any type complete all as specified and directed.

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope complete all as specified and directed.

M&L for screed plaster 10mm thick in cement morta (1:4) on concrete surface of roof to receive water proofing treatment and finished the surface even and fair incl mixing of WPC into prop @ 3% weight of cement complete all as specified and directed. (Note: WPC rate will be included in these rates)

M&L for applying fibre reinforced, single component, elastomeric liquid applied water proofing membrane in white color, Excellent in UV having Solar Reflective Index more than 105, with PU hybrid polymers and reinforcing acrylic fibers, % elongation greater than 300 and applied in three layer per litre complete all as specified and directed as follows :- (a) Surface shall be cleaned and moist that no loose particle s left on surface then apply first coat of liquid water proofing as a primer on the surface diluting as per manufacture instruction and allow the surface to dry for min 10-12 hrs time period. (b) Apply second coat of Liquid water proofing without dilution on the primed surface and allow time to dry the surface for min 10-12 hrs. (c) Apply third coat of liquid water proofing without dilution over the second coat and allow minimum 48 hrs before subjecting the painted surface to service. (d) Material incorported in the work shall be calculated as per site and full quantity of material shall be brought at site before execution of work. (e) necessary gurantee for 05 years shall be submitted by the contractor (f) Work shall be carried out by authorised applicator of manufacturer only and contractor will submit MoU with authorised applicator of manufacturer before execution of work complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches,ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces,match to colour coding of walls, floors, etc complete all as specified and directed.

M&L for Point wiring complete with1100 V grade single core PVC insulated FRLS unsheathed multistraned copper conductor cable 1.5 Sqmm ( Phase-Red,Neutral -black and earth continuity conductor 1.5 sqmm (Green) drawn into and incl. concealed PVC conduit 20 mm dia medium grade with all accessories ISI marked , including MS sunken box for mounting fitting like Modular switches, sockets, fan regulators type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings. One light / fan controlled by one, one way switch.

All as per item No 132 above but One 3 pin 5 Amp socket out let on the same board with other switches

All as per item No 132 above but One 5 Amp socket independent controlled by one, one way switch

All as per item No 132 above but PVC conduit 25 mm dia medium grade with all accessories ISI markedcopper with conuctor cable of size 2.5 Sqmm for 3 pin switch socket outlet 15Amp independent board complete all as specified and directed by Engineer in charge .

All as per item No 132 above but PVC conduit 25 mm dia medium grade with all accessories ISI marked with copper conuctor cable of size 4 Sqmm for 3 pin 15 Amps socket outlet on independent board, including 4.0 Sqmm copper cable continuous earth wire and connecting to common earth dolly.

S&F in replacement of Modular switch 1 way 6A,1 module complete all as specified and directed .

S&F in replacement of Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed .

S&F in replacement of Modular switch 1 way 16A,1 module complete all as specified and directed .

S&F in replacement of Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed .

S&F in repalcement of modular Fan step regulator 120 watts ,2 module AC complete all as specified and directed .

S&F modular PVC white cover plate with frame Following accessories:- White cover plate with frame,3 module

S&F White cover plate with frame, 4 module complete all as specified and directed .

S&F White cover plate with frame, 6 module complete all as specified and directed .

S&F White cover plate with frame,12 module complete all as specified and directed .

S & F PVC blanking plate one module complete all as specified and directed .

M&L Point wiring complete with 1.5 Sqmm single core ( Phase-Red,Neutral -black and earth continuity conductor 1.5 sqmm (Green)PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in concealed PVC conduit 20 mm dia medium grade with all accessories ISI marked, including MS sunken box for mounting fitting like switches, sockets fan regulators type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings. One light/fan/ bell point controlled by one, one way switch with cables 1.5sqmm size.

All as per item No 147 above but One 3 pin 5 Amp socket outlet on same board with other switches complete all as specified and directed .

All as per item No 147 above but One 3 pin 5 Amp socket outlet on independent with cables 1.5sqmm size complete all as specified and directed .

All as per item No 147 above but with 4 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 4 Sqmm copper cable continuous earth wire and connecting to common earth dolly complete all as specified and directed .

S&F in repair of switch, piano type 230/250 volts One way, 5 Amp rating complete all as specified and directed .

S&F in repair of switch, piano type 230/250 volts One way, 15 Amp rating complete all as specified and directed .

S&F in repair of Stepped type electonic Fan Regulator Flush Type on the existing Phanelic laminatated sheet complete all as specified and directed .

S&F in repair of Socket, piano type 230/250 volts 2 -in-1, 3 pin ,06 Amp rating complete all as specified and directed .

S&F in repair of Socket, piano type 230/250 volts 2 -in-1, 3 pin ,16 Amp rating complete all as specified and directed .

M&L Ceiling rose 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

S&F in replacement of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including lamps complete all as specified and directed.

S&F in replacement of LED tube light fitting 1x 20 watt (4 feet long) high-quality materials and design,extruded aluminium housing enhances safety high quality PC diffuser reliable and robust housing structure ,maximize the endurance over the life time slim integrated design,easy to install efficiency in warm white /natural white connecting up with three core flexible copper conductor cable of three core suitable for size from cceiling rose complete all as specified and directed.

S&F in repair of LED light fitting mirror type with high out put diffuser 2 feet 10W,220V,AC decorative box type with driver,holder including LED tube light connecting up with three coreflexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in replacement of LED bldg security light fittings 25 W,made up of high pressure die cast aluminum housing with toughened glass and high power LED's with secondary optic warm white /natural white and IP66 protection including suitable GI bracket,clamps,nut ,bolts and washer complete all as specified and directed.

S&F Electrical chimney of size 90 cm,suction capacity not less than 1800 cu.mtr/hr and outlet size not less than 150 mm motion sensor touch control, turbo speed option, dual side touch control,blower type-metalic , speed 9, energy efficient BLDC moter complete all as specified and directed.

M & L in replacemnt of sub main wiring with two single core 6.0 Sqmm PVC insulated FR-LSH unsheathed cable multi-stranded copper conductor drawn through and including concealed PVC conduit 25 mm dia medium grade with all accessories ISI marked on roof, walls, ceiling etc. including 6.0 Sqmm PVC insulated unsheathed one core multistranded copper conductor earth wire complete all as specified and directed. (Note: Two run of 6 sqmm and one run of 6 sqmm earth wire including PVC conduit shall be measured & paid as one length)

S/F in repalacement of factory made, sheet distribution boards, TPN 4 Ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar complete all as specified and directed.

S/F in repalacement of factory made, sheet distribution boards, SPN 12 Ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar complete all as specified and directed.

S/F in repalacement of factory made, sheet distribution boards, SPN 08 Ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar complete all as specified and directed.

S/F in replacement of MCB SP 6 to 32 amps, 230 Volts 10 KA 'C' curve rupturing capacity confirming to IS-8828 : 1996, IEC-898 : 1995 complete all as specified and directed.

S/F in replacement of MCB SPN 32 amps, 230 Volts 10 KA 'C' curve rupturing capacity confirming to IS-8828 : 1996, IEC-898 : 1995 complete all as specified and directed.

S/F in replacement of MCB SPN 40-63 amps, 230 Volts 10 KA 'C' curve rupturing capacity confirming to IS-8828 : 1996, IEC-898 : 1995 complete all as specified and directed.

S/F in replacement of MCB TPN 63-100 amps, 415 Volts 10 KA 'C' curve rupturing capacity confirming to IS-8828 : 1996, IEC-898 : 1995 complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm burried directly in ground (earth pit not less than 2.25 meters deep below normal ground level ), with top edge of the plate not less than 1.5 mtrs below normal ground level , connected to and including galvanised earth 4 mm dia by means of galvanised wire with iron bolts , nut and washers and connected to other end to main DBs duly protected by galvanised iron pipe 25 mm dia " light grage " earth plate surrounded by packed layer of coat dust and common salt 15 cm thick all around bottom and top watering pipe 20 mm bore of galvanised iron " medium grade " with funnel all as shown on electrical plate No 5 of SSR part -I and connecting to earthing testing on completion including cast iron cover frane and PCC 1:3:6 type C-2 using 20 mm grade stone aggregate as in earthing pit with cast iron cover and frame including necessary earth work etc complete all as per specified and directed by Engr-in-Charge . (Note : PCC Chammer shall be constructed atleast 1.5 mtrs away form the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner).

Taking down Exhaust fan, sealing cable end,dismantling blades and removing fan and blades deposited to MES store complete all as specified and directed.

Refixing only exhaust fan ( M.D Supply)and connecting up including provision of cable from ceiling rose / connector to fan complete all as specified and directed.

Taking down ceiling fan, sealing cable end,dismantling blades and removing fan and blades deposited to MES store complete all as specified and directed.

Refixing ceiling fan ( M.D Supply)and connecting up including provision of cable from ceiling rose / connector to fan aftor minor repair complete all as specified and directed.

Taking down old Geyser any capacity / size and refixing geyser after minor repair (like i.e Heating element,thermostat,PVC connection pipe etc) complete all as specified and directed.

Supply and fixing of single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB of 20 Amps 220 volt complete all as specified and directed.

M & L for Supplying, laying, connecting and testing in trenches, under floors/ roads or on walls Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armored, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade, of size 16 sqmm, 4 core complete all as specified and directed.

Excavation in trenches n.exc 1.5 metre wide and n.exc 1.5 metre in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes, laying cables errection of poles / struts/stays etc n.exe 10 Sqm on plan not exceeding 1.5 metre in depth and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in any type of soil complete all as specified and directed.

Removing of excavated material (soil) to a distance n.exc 50 metre and depositing where directed at a level n.exc 1.50metre above the starting point complete all as specified and directed.

M & L Sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover complete all as specified and directed.

M&L bricks for protection cover to under ground cable (with old size sub class `B` bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10 mm complete all as specified and directed.

M&L in replacement of tubes, 'light grade' 40 mm dia galvanised,withall fitting and fixed to walls and ceilings or laid in floors complete all as specified and directed.

Schedule of Credit