Renovation of Guard Room and Out House and Construction of Barrack for Guard/Drivers in the Campus of Circuit House Khunti, Dist-Khunti For the Year 2021-22

Amount

Earth work in excavation of foundation trenches in ordinary soil (vide classification of soil item-A&B) and disposal of excavated earth as obtained to distance upto 50 M. including all lifts, levelling, ramming the foundation trenches, removing roots of trees shrubs all complete as per approved design, building specification and direction of E/I.

Earth Filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5M all complete as per building specification and direction of E/I.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I.

Providing designation 75B one brick flat joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing PCC M -150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibration,. Striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Centering and shuttering including shuttering propping etc and removal of form for : foundations, footings, bases of columns etc for mass concrete.

Providing and Laying in Position specified grade of reinforced cement concrete, excluding the cost of centring, shuttering, finishing and reinforcement All work up to plinth level.

1:1.5:3 (1Cement : 1.5 Coarse sand (zone-iii): graded stone aggregate 20mm nominal size)

Reinforcement cement concrete work in wall (any thickness) including attached pilasters, buttresses, plinth and string course, fillets, columns, pillars, piers, abutments, posts and struts etc above plinth level up to floor five level excluding cost of centering shuttering finishing and reinforcement : 1:1.5:3

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15" Landings, balconies, shelves, chajjas, lintels, band, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centring, shuttering finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) : 3 graded stone aggregate 20mm nominal size)

Centering and shuttering including shuttering propping etc and removal of form for : foundations, footings, bases of columns etc for mass concrete.

Centering and shuttering including shuttering propping etc and removal of form for : columns, pillars, piers, abutments, posts and struts

Centering and shuttering including shuttering propping etc and removal of form for : suspended floors, roots, landings, balconies and access platform.

Centering and shuttering including shuttering propping etc and removal of form for : weather shed, chajjas, corbels etc including edges.

Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of FM 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, ranking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing 25mm thick damp proof course with cement concrete M-200 with nominal mix of ( 1:1½:3 ) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening , centering shuttering , and mixing cement concrete in mixer with 5% cico or any other approved compound and placing in position, striking , curing , taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 75-B brick work in C.M.(1:6) in superstructure with approved quality of clean coarse sand of F.M.2 to 2.5 including providing 10mm thick mortar joints , cost of screening materials, scaffolding ranking out joints to 15mm depth, curing taxes and royalty all complete as per specification and direction of E/I.

Supplying, fitting and fixing 20 gauge G.C.I. sheet gate fitted on M.S. Angle frame of size 60x60x6mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.

Supplying, fitting and fixing MS grill made of 20x6mm MS flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (Where materials is not supplied by the deptt.)

Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layer 19mm thick (1:2:4) with 12mm to 6mm size graded stone chips and top layer 6mm thick (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty with all complete as per building specification and direction of E/I.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and laying 6mm pre cast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing polishing and cost of curing taxes, and royalty all complete as per building specification and direction and of E/I. White “A” grade white 15x15 cm tiles.

Providing and fixing fan hook of 16mm dia MS bar 1 meter long bent to required size and shape, placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (Where material is not supplied by deppt.)

Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing two coat of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/I.

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust, dirt scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes as complete as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and made over steel surface thoroughly, scaffolding and taxes all complete as per building specification and direction of E/I.

Providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing etc excluding carriage of MS Rods (TMT Fe 415) (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wore, removal of rust, placing the rods in position all complete as per building specification and etc. as per direction of E/I.

Providing Tor steel reinforcement or 10mm, 12mm & 16mm dia bars as per approved design and drawing etc excluding carriage of MS Rods (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wore, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.

a) 10mm dia

b) 12mm to 20mm

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Supplying, fitting and fixing vitreous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350gms, 32mm P.V.C waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of E/I with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Providing 25mm thick water proof cement plaster cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing Polythene water storage tank of ISI mark (sintex/himgiri/gangotri) with cover and locking arrangement with all complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of E/I.

15mm dia

20mm dia

25mm dia

Providing and fixing male ended 15mm dia brass bib cock of approved quality (weight not less than 350grams with extra socket all complete as specification and direction of E/I.

Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I., "p" trap 15 litres C.I.. or C. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32 mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm dia

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

Supplying materials and labour for construction inspection chamber of designation class 75B brick size 750mm deep 500x 450mm normal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600 x 475mm G.I cover with frame (Weight not less than 36kg) along with in excavation and 80 mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I.

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of E/I.

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm)thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of E/I, manufacturer's specification & drawing.

Iron and Steel Material Supply Fitting and Fixing Follwing angle with all complete job.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by E/I. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. all complete as per direction of E/I.

Taking down R.W.D. pipe carefully stacking on the ground and prefixing the same in proper place after cleaning at thoroughly all complete as per direction of E/I.

Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush shutters doors and windows with black board core blended with high quality phenol formal dbhydes synthetic resin both side commercial veneered of standard make with oxidised iron fittings etc. all complete as per building specification and direction of E/I.

Supplying, fitting and fixing fully glazed steel door, windows or ventilations of standard rolled ‘Z’ and mullion steel sections and size as per IS-1038 joints met and welded with 100 x 16 x 3 mm MS lugs fixed in cement concrete (1:2:4) blocks 15x10x10 cm, size including cost of oxidised iron fittings, with hinges, handle per steps catch springs, 3 mm thick plain glass panes with aluminium beads and inner frame fixed with lugs with 20mm ling 6.3mm GI counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/I.

Providing 19mm thick water proof cement plaster (1:3) cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt scales, smokes, grease and sand papering, including coat of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt scales, smokes, grease and sand papering, including coat of scaffolding and taxes all complete as per building specification and direction of E/I.

Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing and fixing on wall face unplasticised PVC Moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Bend (110mm)

Shoe (110mm)

Clips (110mm)

Providing and fixing 25 mm thick shutters for cup board etc. : Glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws.

Providing two coats of snowcem of approved shade and make over old surface including washing, cleaning and preparing the walls, scaffolding, curing and taxes all complete as per building specification and direction of E/I.

Providing 40mm thick pre cast R.C.C M-200 in slab in shelves with nominal mix of (1:1½:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 with 1.5mm cement punning at top and side and 6mm cement plaster (1:4) at bottom including screening, and placing the slab in position, (but excluding the cost of reinforcement ) taxes and royalty all complete as per building specification and direction of E/I.

Jungle Clearing grass and removal of the rubbish up to a distance of 50m outside the periphery of the area cleared

Earth work in excavation of foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to distance upto 50 M. including all lifts, levelling, ramming the foundation trenches, removing roots of trees shrubs all complete as per approved design, building specification and direction of E/I.

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of E/I.

Wiring for light point / exhaust fan point / call bell point with 1.5 sq .mm FRPVC insulated copper conductor single core cable in surface / recessed PVC Conduct, with piano type switch, phenolic laminated sheet, suitable size PVC/G.l. box etx. As Required. Group A

Supplying and fixing following piano type switch / socket on the existing switch box/cover including connections as required. 5/6 amp switch & socket

Wiring for Circuit / submain wiring along with the following size PVC / insulated copper conductor single core cable in surface/recessed PVC conductor single core cable for loop earthing as required.

2x1.5sqmm + 1x1.5 sqmm earth wire

2x2.5 sqmm + 1x2.5 sqmm earth wire

2x4 sqmm + 1x4 sqmm earth wire

Supplying and fixing stepped type electronic fan regulatar on the existing modular plate and switch box including connections as required.

Supplying and fixing PVC/GI box of following sizes in surface / recessed with suitable size of phenolic laminated sheet cover infront including painting as required. 6"x8" size

Supplying and fixing batten /angle holder including connection etc as required.

Supplying and fixing 3 pin 5ams Ceilling rose on the existing junction box/ wooen including connection etc as required.

Supplying & fixing following way single pole neutral sheet MCB distriution board 240 volts on surface / recess complete with tinned copper busbar neutral busbar earth bar din bar detachable gland plate interconnection phosphatized powder painted with complete job. 8 way single door

Supplying & fixing 6amps to 32 amps rating 240 volts "B" series miniature circuit breaker suitable for lighting and other loads of folloing poles in the existing MCBDBcomplete with connectiontesting and commissioning etc.

6/32 amps single pole "B" series

40amps single pole "B" series

Supply of 48" (1200mm) Ceiling Fan Bajaj/Crompton or any other approved make etc without regulator with all complete job.

Installation testing and commissioning of of Ceilling fan including wiring the down rods of standard length (upto 30 cm ) with 1.5sq mm FR PVC insulated copper conductor single core cable etc.as required.

Supplying, fitting and fixing Exhaust Fan 12" (300mm) with all complete job.

Carriage of materials from nearest approved sourses of supply including loading into trucks and unloading from truck and stacking properly at work site etc. all complete job as direction of E/I.

a) Sand leads up to 8 K.M

b) Stone Chips leads up to 22 K.M

c) Bricks leads up to 8 K.M (1 K + 7 P)

Supplying, fitting and fixing of Split AC 1.5 tone with steplizer fittings and fixing with all complete job.

Supplying, fitting and fixing of Sofa Set with all complete job.

Supplying, fitting and fixing of Executive Chair with all complete job.

Supplying, fitting and fixing of Kitchen Kettering with all complete job.

Add 12 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

M/S AMARJEET MISHRA

JAYSRI INFRAPROJECTS PRIVATE LIMITED