Loading
Loading…
Loading…
Tender Value
₹8.3 Cr
EMD Value
₹16.6 L
Closing Date
23 Sept 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
ELECT G
13 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of "V/N" or "V" whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. Similar Nature of Work are as follows for this work:- 1) Electrification of service buildings, 2) Electrification of staff quarters, 3) Electrification of offices, 4) Electrification of Road and colony lighting, 5) Electrification of Circulating area lighting, 6) Erection & commissioning of LT & HT upto 33kV overhead mains, 7) Sub-station installations & commissioning, 8) Electrification of washing-pits, sheds, workshops etc., 9) Any above work or combination of (1) to (8) above.
15 conditions · 4 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested by which they/he is qualifying the Qualifying criteria mentioned in the tender document. It will not be obligatory on the part of tender committee to scrutinize beyond the submitted document of tenderer as far as his qualification for the tender is concerned. The railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway there under.
No post tender correspondence shall be entertained after closing of tender even Suo moto post tender letters of the tenderers shall be treated as null/void.
The tenderers are required to observe the website to find out if any correction slips issued subsequent to uploading of the Tender . Railway reserves the right to make any additions/alterations to the tender uploaded and issue corrigendum to the same effect. In case the tenderer fails to take note of the above corrigendum, the additions and alterations entered/effected in the corrigendum shall be binding upon the tenderer and no claim what so ever will be entertained by Railway.
The tenderer should upload the documents carefully. The documents uploaded by tenderer should be clearly visible and in legible format.
Indian Railways Standard General Conditions of contract 2022 along with correction slips corrected up to date of closing of tender and the attached documents are part of the tender document.
The offers which are incomplete, without supporting documents, unsigned, conditional, will be summarily rejected.
As per letter No. 2022/CE-I/CT/GCC/Correspondence/ New Delhi, dated 14.05.2024 "On IREPS Module , a facility has already been created for online submission of Annexure-V. Therefore, the provision of downloading of Annexure-V of GCC & uploading of physically signed Annexure-V by tenderer had been discontinued on IREPS"
division (i) Raising of 6 nos platform from RL/LL to HL at Jukehi (JKE),Jaitwara (JTW) and Tikariya (TKYR) stations (ii) Raising of 7 nos platform from RL/LL to HL at Aslana (ANA), Bandakpur (BNU) and Ghatera (GEA) stations (iii) Raising of 7 nos platform from RL/LL to HL at Sohagpur(SGP), Bohani (BNE), Bhitoni (BHTN), Bheraghat (BRGT), Amdara(UDR), Markundi (MKD) and Lagargawan (LGCE) stations (iv) Raising of 6 nos platform from RL/LL to HL at Bakhleta (BQQ), Rethi (REI), Narioli (NOI), Phatharia (PHA), Sagoni (SAO) and Bharsendi (BSDL) stations (v) Raising of 7 no. Platform from RL/LL to HL at Gosalpur (GSPR), Niwar(NWR) and Patohan(PTHD) station.(vi) Raising of 6 nos platform from RL/LL to HL at Bagratawa (BGTA), Guramkhedi (GMD) and Ghatpindrai (GPC) stations"
JBP-L-T-No-25-2026~WCR
JBP-L-T-No-25-2026
Open
Works - General
12 Months
Jabalpur, Madhya Pradesh
₹0
₹16.6 L
23 Sept 2026
27 Aug 2026
9 Sept 2026
420 items across 6 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,30,87,632.68 | ||
| — | Item Breakup | for details. | — | ||
| Supply Erection testing and commisioning of LT outdoor panel (water proof) made/fabricated out of 1.6 mm MS sheet duly painted with powdercoated , IP-65, IK-09 having suitable copper bus bars with sleeves , indicating lamps, multifunctionmeter , Gland ,Lugs, Foundation , earthing , Door Lock arrangment, pad lock, suitable MS channel ,SWG wire, suitable size Cover Shed with MS angle, grauting , paint etc. Incoming 100 A, 4 pole 25kA MCCB (2 nos, 1 as spare) and outgoing 5 x 40A 4 poleMCCB 25kA + 5 x 63A 4 pole MCCB 25kA. All the MCCBs shall be of legrand , ABB, L&T, Schnider,Hager,Simens make or equivalent.Design of panel will beapproved by comptent authority before supply, | — | — | — | 2,71,361.61 | |
| — | Item Breakup | for details. | — | ||
| Dismantling of Rail pole/ H Beam / Octagonal Pole | — | — | — | 53,446.5 | |
| — | Item Breakup | for details. | — | ||
| Cable laying DOUBLE in earth: This involves Excavation of 1000mm deep trench in soil/hard murrum/tar road/below Railway track. After this the cable shall be laid and then both sides are to be covered with bricks. The rest of the trench to be refilled by sheaved earth. The cable shall be supplied free of cost by Rly's which shall have to be transported by the contractor from Rly. depot,JBP to the site | — | — | — | 6,26,088 | |
| — | Item Breakup | for details. | — | ||
| "Cable laying single in earth. The cable shall be supplied by Railways free of cost from depot at JBP which shall have to be transported from depot to site by contractor at his cost and then its laying.crossing rly. track/platform/road / soil/ hard murrum after diggingof trench and back filling with excavated earth after laying of pipe and making good the damages as required " | — | — | — | 76,440 | |
| — | Item Breakup | for details. | — | ||
| Drilling of horizontal bore below track / road/ soil/ concrete by pushing method for laying of HDPE pipeup to 450 mm dia( HDPE Pipe will be supply by contractor ) | — | — | — | 32,23,064 | |
| — | Item Breakup | for details. | — | ||
| Excavation of Cable trench in Cement Concrete/RCC/ Track/Tiles and laying of cable, The cable shall besupplied free of cost by Rly's which shall have to be transported by the contractor from Rly. depot,JBPto the site (size 300 mm width x1000mm depth and making of original arrangements after laying ofcable.) | — | — | — | 10,83,360 | |
| — | Item Breakup | for details. | — | ||
| Cable laying on wall /pole and other similar places fixing using MS flat [25x6mm.]clamps, nuts, bolts,screws or nails as per site requirement | — | — | — | 46,095 | |
| — | Item Breakup | for details. | — | ||
| Provision & laying of HDPE pipe 4" dia in tack/ road / soil/ hard murrum crossing including jointing etc. with required accessories etc.after diggingof trench and back filling with excavated earth after laying of pipe and making good the damages as required. | — | — | — | 21,13,864 | |
| — | Item Breakup | for details. | — | ||
| Supply & laying of HDPE pipe 2"dia for crossing rly. track/platform/road / soil/ hard murrum after diggingof trench and back filling with excavated earth after laying of pipe and making good the damages as required. | — | — | — | 2,52,094.5 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of 50 mm dia GI pipe B class as per IS-1239 | — | — | — | 64,264.5 | |
| — | Item Breakup | for details. | — | ||
| Pipe earthing-Supply of material for earthing pit as per IS 3043, erection include excavation ofearth , filling of salt, charcoal, B class GI pipe with funnel at top with cast iron cover havinghandle and cement concrete chamber etc as per latest IS with inscription ligbility of IR value ontop of earth pit chamber with serial no etc. Then testing with earth tester | — | — | — | 1,34,326.56 | |
| — | Item Breakup | for details. | — | ||
| Supply and laying of 8/10/12 SWG GI wire a sper requireement of site | — | — | — | 3,844.1 | |
| — | Item Breakup | for details. | — | ||
| Supply & fixing of cable route marker. | — | — | — | 6,738.55 | |
| — | Item Breakup | for details. | — | ||
| Supply and erection of outdoor control box of IP54 degree of protection,Switch On-Off street lights on time scheduling basis by incorporating an analog/digital time switch and contactor, 32A 230 V 3P Timelite Distribution Boards-Analog Time Switch,IS/IEC 13947-27 | — | — | — | 2,55,863.72 | |
| — | Item Breakup | for details. | — | ||
| Supply and erection of 4 mtrs octagonal pole of alongwith baseplate, foundation, earthing , 8 SWG GIwire and single/ double arms for holding fittings make- Bajaj,crompton, Surya, or simillar makeApproval will be required by comptent authority before supply | — | — | — | 24,34,926.6 | |
| — | Item Breakup | for details. | — | ||
| Supply, erection, testing & commissioning of 36 W LED street light fittings suitable for 230V AC, 50 Hzcomprise a single piece deep drawn alluminium housing IP-65 colour temp 5500- 7000K withconnectionetc. with suitable fixtures and clamps etc Make- Bajaj, Surya, Havells, crompton or Similarmake | — | — | — | 5,25,254.8 | |
| — | Item Breakup | for details. | — | ||
| Rerection of octagonal steel pole(4-6 mtr) on cement concrete foundation complete with foundation bolts, excavation of earth single arm, junction box , MCB, Backelite plate etc (Collect from JBP Depot) | — | — | — | 2,06,185.5 | |
| — | Item Breakup | for details. | — | ||
| Removing, Shafting,relaying of existing cable in trench, wall, soil, roof, track crossing, road crossing,cable tray, etc including MS clamp, nut, bolt, Screw, Nails,gland, lugs.Disconnection, proper reconnection,from panel or any other thing. | — | — | — | 2,83,500 | |
| — | Item Breakup | for details. | — | ||
| SDB for light and fan. TPN DB 4 way (8+12) IP-43 with metal door, 4 with ELCB, RCCB 32A TPN incomer and outgoing having 5 x 10A SPMCB and 5 x 6A SP MCB with pherrol MCB make - Legrand, Havells, Hager, simens or equivalent , | — | — | — | 74,406.36 | |
| — | Item Breakup | for details. | — | ||
| "SDB for Power. TPN DB 4 way (8+12) IP-43 with metal door, with ELCB, RCCB 63A TPN incomer and outgoing having 5 x 32A SPMCB and 5 x 20/16A SP MCB. MCB make - Legrand, Havells, Hager, simens or equivalent " | — | — | — | 84,566.44 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of 1 x 18/20W LED fittings 4 feet length. The fittings shall have to be erected by the contractor with all fixing accessories/MS clamps, nuts bolts etc. as per requirement at site. " | — | — | — | 27,788.4 | |
| — | Item Breakup | for details. | — | ||
| PVC conduit 25 mm dia as per IS-9537 (HMS) | — | — | — | 28,867.5 | |
| — | Item Breakup | for details. | — | ||
| Cutting of wall / Floor/ Tile for insertion of 1" dia PVC conduit, fixing hardwares for fixing the conduit along with its supply and then replaster it with cement and sand mixture and then painting with matching colour as per existing colour of the wall. Proper joints in pipes, bends/elbows/ junctions are to be provided as per site requirement | — | — | — | 81,114 | |
| — | Item Breakup | for details. | — | ||
| Supply of GI perforated cable tray of size150 mm x 50 mm x 2 mm Thick | — | — | — | 1,21,583.25 | |
| — | Item Breakup | for details. | — | ||
| Laying of GI perforated cable tray of size150 mm x 50 mm x 2 mm Thick | — | — | — | 12,156.75 | |
| — | Item Breakup | for details. | — | ||
| Supply of GI perforated cable tray of size 200 mm x 50 mm x 2 mm Thick | — | — | — | 81,825.6 | |
| — | Item Breakup | for details. | — | ||
| Laying of GI perforated cable tray of size 200 mm x 50 mm x 2 mm Thick | — | — | — | 8,182.8 | |
| — | Item Breakup | for details. | — | ||
| Supply of GI perforated cable tray of size 300 mm x 50 mm x 2 mm Thick | — | — | — | 89,305.2 | |
| — | Item Breakup | for details. | — | ||
| Laying of GI perforated cable tray of size 300 mm x 50 mm x 2 mm Thick | — | — | — | 9,922.8 | |
| — | Item Breakup | for details. | — | ||
| "Supply, Installation, Testing and commissioning of MS Fabrication in angle, channel and flat forsupports to equipments panels stands and cable trays." | — | — | — | 12,261.6 | |
| — | Item Breakup | for details. | — | ||
| junction boxes IP 65 made of highqualitythermoplastic/Polystyrene(shock proof, rust free, corrosion free, acid and chemical resistant, fire retardant made of halogen andsilica free recyclable low toxicity material) black colour cover, 4sq, grey with 5 polescrew terminal 4 sqmm (IP 68 cable gland with lock nut), M20 seal range (6-12mm) and M20 IP54mini trunking adapter, grey. Erection will include its fixing near fitting on the RCC slab with rowelplugs, screws etc. | — | — | — | 47,209.2 | |
| — | Item Breakup | for details. | — | ||
| Design, manufacture, display of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed /router cut on monomeric calendered vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, eilingmounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light.Suitable size end cap of 1.5 mm thick SS 304 should be provided. | — | — | — | 3,91,974 | |
| — | Item Breakup | for details. | — | ||
| Erection and installation of above said boards as per Railway's specification | — | — | — | 39,198 | |
| — | Item Breakup | for details. | — | ||
| Construction of cable Loop chamber ofsuitable size in KB bricks & covered with 2" thick concrete slab for protection of cable & provision for lifting of cover. | — | — | — | 2,40,440.34 | |
| — | Item Breakup | for details. | — | ||
| Supply, erection, testing and commissioning of Sub Main with 2 x4 sqmm FRLS copper wire inside PVC Casing caping with running earth etc complete. (1 m length of submain consists one cktmtr including all accessories & 2 wire of4 sqmm with one wire of 2.5 sqmm for earth conn). | — | — | — | 76,112.5 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
AC08to10.pdf
ATTACHMENT
25-2026Tenderdocument.pdf Tender Doc
ATTACHMENT
GCCcorrectionslips.pdf
ATTACHMENT
ac112.pdf
ATTACHMENT
25-2026Tenderdocument.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .