LLH- Provision of 110V AC supply on each pillar at Bay-2/L, Bay-4/L and Bay-4/Trolley Repair section for POH of ICF AC & Non-AC Coaches at L-Shop.

I-Cable & Cable Laying (Including all taxes and charges). 311314.00 Rs.

II-General Electrical Works. (Including all taxes and charges). 1943202.26 Rs.

Item Breakup - I-Cable & Cable Laying (Including all taxes and charges).

Supply of LT XLPE insulated, PVC outer sheathed, non-magnetic Metre galvanized steel strip armoured, stranded compact circular Aluminium conductor Cable of size 4 core x 50 sq.mm, nominal system Voltage 1100V grade and highest system voltage 1210V conforming to IS 7098 ( Part I - 1988 ) with amendment number 1 and 2 and 3 Reaffirmed 2005. ( Make of cable -Anchor / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab) (S= 369.35, L= 0.00)

Supply of LT XLPE insulated, PVC outer sheathed, non-magnetic Metre galvanized steel strip armoured, stranded compact circular Aluminium conductor Cable of size 4 core x 120 sq.mm, nominal system Voltage 1100V grade and highest system voltage 1210V conforming to IS 7098 ( Part I - 1988 ) with amendment number 1 and 2 and 3 Reaffirmed 2005. ( Make of cable -Anchor / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab) (S= 761.02, L= 0.00)

Laying, jointing, connection, testing & commissioning of LT cable Metre 1100V grade of small size (Above 95 sq mm ) along the wall by necessary clamping arrangement or concealed including making good of wall including socketing and termination with epoxy end jointibg where necessary (clamps should be made of 50mmx 6mm MS flat). (S= 69.47, L= 0.00)

Laying, jointing, connection,testing & commissioning of LTcable Metre 1100V grade of higher size(above 95 sq.mm.) along the wall/catenary or garder truss by necessary clamping arrangement including socketing and termination with epoxy end jointing where necessary (clamp should be made of 50 mm x 6 mm M.S. Flat). (S= 137.32, L= 0.00) Total 311314.00

Item Breakup - II-General Electrical Works. (Including all taxes and charges).

Supply of Dust and vermin proof metal Busbar Chamber fabricated Numbers using sheet steel (CRCA) of 16 SWG ( 1.6mm ) thickness and epoxy powder coated consisting of 4nos. tinned copper busbar of each bar of capacity 200 Amp, 6/8 way, suitable for 415V,50Hz , 25KA Short Circuit withstand Capacity(1Sec.,KA) supply system including all accessories along with fixing,connection, testing and commissioning of incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement. (similar to Havells cat, No.: IHBC020006 /IHBC020008) (Conforming to EC- 60439/IS-8623 & IEC-60529/IS-2147 (now superseded by IS 13947)) ( Make -Havells /Indo-Asian/ Standard / HPL/ C&S / LK (L&T)). (S= 10704. 62, L= 0.00)

Supply ,fixing, connection,testing and commissioning of 20A, 3-pin, Numbers 230V, 50Hz and earth metal plug socket in SPN enclosure with SPN MCB (6-32Amp) (accessories as required at per instalation site condition ) (Metal Plug & Socket should confirm to IS 8623-1 & 3, IEC 61439-1 & 3 latest year) with CRCA sheet steel, RAL9003, powder coated. ( Make of Metal Plug & Socket - L & T Switchgear (Lauritz Knudsen) / Siemens/ ABB / Legrand / Schneider/ C&S). (S= 1833.07, L= 0.00)

Supply of ISI marked single core HRFR PVC insulted industrial cable Metre 16 sq. mm.Copper conductor cable 1100 V grade as Conforming to IS 694/2010. (Make of Copper conductor wire -Anchor / Havells /Finolex / Gloster / KEI /Polycab / RR Kabel) (S= 190.73, L= 0.00)

Laying, jointing, connection , testing of 3 nos. single core cable Metre 1100 volt grade through girder with support on suitable size LT pin / shackle insulators fitted on MS bracket & clamps at suitable intervals including socket ingand jointing at termination box for 110V ac line along with commissioning ofline. (S= 189.73, L= 0.00)

Supply, laying and wiring of 110 V dropping point (from junction Numbers box to terminal board) with 6 sq mm PVC insulated single core multi strand FRLS Cu cable 1100 V grade conforming to IS - 694/ 2010 or latest year in heavy gauge ISI marked ( make Presto /Plaza/ AKG ) MS conduit with uniform wiring clamping at regular interval (Each piller dropper should consist of 2 nos. 6 sq.mm PVC insulated cu cable) and to be terminated at suitable 20Amp SPN Plug socket with 6-32 AmpMCB ( Capacity as required) in sheet steel enclosure ( Each piller dropper should consist of 2 no. 6 mm2 PVC insulated Copper wire of approx. 7 mlength).(Make of Copper conductor wire -Anchor / Havells /Finolex / Gloster / KEI /Polycab / RR Kabel ) (Make of Modular switch,socket, box, cover plate etc. - ABB / Anchor (Panasonic ) / Havells (Crabtree ) / Legrand / LK(L&T) , North West , Schneider , C&S )( Make of Metal Plug & Socket - L & T Switchgear (Lauritz Knudsen) / Siemens/ ABB / Legrand / Schneider/ C&S) (S= 2129.92, L= 0.00)

Supply,foundation, installation, testing & commissioning of 30KVA, Numbers 415/110V, 3 Phase ONAN Lovolite transformer with all accessories as per installation site condition. (Transformer as per IS :2026:2011 with all accessories) (Make:- Automatic Electro Gear, EasternTransformers Equipments Pvt Ltd) (S= 111044.67, L= 0.00)

Supply fixing connection testing and commissioning of 415V 4Pole Numbers 63 Amp Switch disconnector fuse unit Conforming to IS/IEC:60947- Part 1 &3 with SS enclosure with Door interlock withTerminal Shrouds on both sides and Phase Barriers included (Similar to FN- TPN S-D-F in SS Enclosure of make LK: Type- FN 63 TPN / FP CE*, Cat No.- SK90484* with DIN type fuse of suitable rating and quantity) & proper fixing arrangement on the wall with MS clamps with cable entry box with gland and thimble as necessary for connection of cables. (Switchgear Make: Siemens/ ABB/ Schneider/Lauritz Knudsen/ C&S/ Havells/ Legrand)" (S= 4532. 39, L= 0.00)

Supply fixing connection testing and commissioning of 415V 4Pole Numbers 100 Amp Switch disconnector fuse unit Conforming to IS/IEC:60947- Part 1 & 3 with SS enclosure with Door interlock withTerminal Shrouds on both sides and Phase Barriers included (Similar to FN- TPN S-D-F in SS Enclosure of make LK: Type- FN 100 TPN, Cat No.- SK90485 with DIN type fuse of suitable rating and quantity) & proper fixing arrangement on the wall with MS clamps with cable entry box with gland and thimble as necessary for connection of cables. (Switchgear Make:Siemens/ ABB/ Schneider/Lauritz Knudsen/ C&S/ Havells/ Legrand)" (S= 13567.99, L= 0.00) Total 1943202.26