Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.5 LAccepted-AOC HOUSE NO 87 SHAH FAISAL ABAD DHOBI MOHALLA BATAMALOO SRINAGAR 190009 | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190009 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹43.1 L+₹1.0 L (2.40%)Rejected-Finance R O IQBAL MARKET AALI MAJID EIDGAH SRINAGAR KASHMIR | SRINAGAR | JAMMU AND KASHMIR | 190001 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹43.4 L+₹1.3 L (2.99%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹50.3 L+₹8.2 L (19.5%)Rejected-Finance BANPURA BATWARA SRINAGAR 190004 J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190004 | L4 | Rejected-Finance Other than lowest bidder |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
18 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj. Sujith Mohan, GE
Garrison Engineer 864 Enggr Wks Sec, PIN-913864,C/o 56 APO
COMPREHENSIVE MAINTENANCE TO B/R ITEMS FOR TA INF BN, TRANSIT CAMP , MD and OTM ACCN AND CERTAIN MISC REPAIR WORKS IN TOILET BATHROOM UNDER AGE B/R-III BB CANTT SRINAGAR
2023_MES_619444_1
864/WS-65/2023-24
Open Tender
Civil Works
Item Rate
180 days
B B Cantt.
AS PER TENDER
7 documents required · 7 mandatory
₹500
GE 864 EWS
₹1 L
Yes
1 Dec 2023
18 Sept 2023
23 Oct 2023
18 Sept 2023
18 Oct 2023
4 Oct 2023
Amount
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 sqm each complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc. 1.5 sqm each complete all as specified and as directed.
Taking down shutters of any description n exc 1 sqm each complete all as specified and as directed.
Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and as directed.
S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
S&F second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.
S&F 35mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces with 2nd class hard wood rail and style. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F 3mm sheet glass, ordinary quality and glazing with oil putty/ aluminium beading in square n exc 0.5 sqm in each pane in wooden, metal, stone, concrete, bricks or other similar surrounds complete all as specified and as directed.
S&F wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples of mesh size 20mm complete all as specified and as directed.
S&F 150 mm size aluminium handles, cast type, anodised complete all as specified and as directed.
S&F 100 mm size aluminium handles, cast type, anodised complete all as specified and as directed.
S&F 200 long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F 150 long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.
S&F 75 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.
S&F in repairs 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed tothe stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. Note : Wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. Note : Wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet.
M&L for preparation of newly or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.
M&L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions including Gl frame work of size 605 x 605 mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and including applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.
S&F hangers 6 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as directed.
S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing including dismantling old frame work any type any description complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
M&L for mild steel work as in framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for glazed ceramic coloured tiles in vertical surface 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:4) complete all as specified and as directed.
M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:4) complete all as specified and as directed.
M&L for Virified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:4) complete all as specified and as directed.
M&L for 25 mm thick cement concrete (1:2:4) type B0 (using 20mm graded crushed stone aggregate) as in sub base/ leveling course, concrete surface is to be finished even and smooth without using extra cement complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc. complete all as specified and as directed.
M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM (1:4) complete all as specified and as directed.
M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, with grey cement and pigments set, jointed and pointed in neat cement slurry in floors over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:4) complete all as specified and as directed.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over 25mm thick sand cushioning (sand cushioning shall be measured and paid saparetely) complete all as specified and as directed.
M&L for factory made precast cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in road side kerb stone of size & shape as directed by Engineer-in-charge, including setting in cement mortar (1:4) complete all as specified and as directed.
M&L for sand cushioning under floor/ path including watering and consolidation complete all as specified and as directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base 15mm thick in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick backing coat in CM (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M&L for 75 mm thick cement concrete (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring/ hard standing complete all as specified and as directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
M&L for rendering 12mm thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing in CM (1:3) including neeru finish to plastering complete all as specified and as directed.
M&L for plain cement concrete (1:7:12) type F2 (using 40mm graded crushed stone aggregate) as in mass concrete complete all as specified and as directed.
M&L for 50 mm thick cement concrete (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) as in Plinth Protection, concrete surface is to be finished even and smooth without using extra cement complete all as specified and as directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6), rendering is to be finished even and smooth (without using extra cement) complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4), rendering is to be finished even and smooth (without using extra cement) complete all as specified and as directed.
M&L for rendering 5mm thick on fair faces of brick work or concrete ceiling surfaces in CM (1:3), rendering is to be finished even and smooth (without using extra cement) complete all as specified and as directed.
M&L for preparation of newly plastered/ unplastered wall surfaces and applying two coats of cement base paint complete all as specified and as directed.
M&L for preparation of newly plastered/ unplastered wall surfaces and applying applying two coats oil bound distemper over a coat of primer complete all as specified and as directed.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
M&L for walling of random rubble, uncoursed well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and as directed.
M&L for extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40mm to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses of granite or trap stone complete all as specified and as directed.
M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses walling in cement mortar (1:4) complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks (old size), straight or curved on plan exceeding 6 mtr mean radius built in CM (1:6) complete all as specified and as directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
S&F in repair 15mm bore sink/ wall mixer, for mixing hot or cold water, brass, CP, fancy type, with capstan head handles, screwed down high pressure, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
S&F in repair vitreous china squatting pan 'Orissa' pattern long pan size 580 x 440 mm white with integral foot rests (excluding cistern and flush pipe), complete all as specified and as directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.
S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 10 litres capacity, and connections to pipes complete all as specified and as directed.
S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
S&F in repair Vitreous china wash basin white flat back size 580x450 mm excluding taps waste chain and plug and porcelain stopper but including brackets including 15 mm bore centre hole mixer, complete all as specified and as directed.
S&F in repair Angle valve / Stop valve15mm bore cast copper alloy chromium plated fancy type without shank and cup concealed type screwed for iron pipe or for union complete all as specified and as directed.
S&F in repair PVC flexible connections PTMT 600mm long 15mm dia with flange nuts & washers complete all as specified and as directed.
S&F in repair CP brass soap dish, heavy duty, fixed with chromium plated brass screws complete all as specified and as directed.
S&F in repair CP Towel Ring 200mm dia complete all as specified and as directed.
S&F in repair CP steel grating 75/100mm dia complete all as specified and as directed.
S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60 cm long between flanges complete all as specified and as directed.
Taking up or down 15mm bore dia, steel tubing & connections incl cleaning for refixing or removal to store complete all as specified and as directed.
Taking up or down 20mm bore dia, steel tubing & connections incl cleaning for refixing or removal to store complete all as specified and as directed.
S&F 15mm bore steel water tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Refixing old steel tubing 15mm bore and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed.
S&F 20mm bore steel water tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Refixing old steel tubing 20mm bore and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed.
S&F in repair 15mm dia Bib taps cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe complete all as specified and as directed.
S&F in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union complete all as specified and as directed.
Dismantling water tanks and removing to store of capacity exc 250 & n exc 500 ltr complete all as specified and as directed.
Dismantling water tanks and removing to store of capacity exc 500 & n exc 1000 ltr complete all as specified and as directed.
S&F rotational moulded polyethylene water storage tanks of capacity 500 ltrs (cylindrical vertical with closed top) triple layered hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.
S&F rotational moulded polyethylene water storage tanks of capacity 1000 ltrs (cylindrical vertical with closed top) triple layered hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.
S&F in repairs 20mm bore ball PTMT valve, high pressure with polyethene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and as directed.
S&F in repair stop valve, cast copper alloy with crutch or butterfly handles, screwed both ends for 20mm bore iron pipe or brass ferrule complete all as specified and as directed.
S&F in repair 25mm outer dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and as directed.
S&F in repair 32mm outer dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and as directed.
S&F in repair PP-R gate valve (brass insert) 25 mm outer dia as per requirement of the site complete all as specified and as directed.
S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and as directed.
S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and as directed.
S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos.), suitable handle (1 No.) complete all as specified and as directed.
S&F 5 mm thick tinted glass fixed with necessary rubber gasket and aluminium beading weight not less than 100gm per RM with aluminium frame complete all as specified and as directed.
S&F brass 2 lever Mortice lock, vertical type, size 100 mm complete all as specified and as directed.
S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and as directed.
S&F in repairs 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.
S&F 100 mm size aluminium anodised hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.
M&L for lagging to pipes internal dia 15mm used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144Kg/cum conforming to IS9842 including chicken mesh wire netting 25 gauge, 20mm mesh allowed & with 0.01mm aluminium foil including removing old lagging or for new pipes complete all as specified and as directed.
M&L for lagging to pipes internal dia 20mm used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144Kg/cum conforming to IS9842 including chicken mesh wire netting 25 gauge, 20mm mesh allowed & with 0.01mm aluminium foil including removing old lagging or for new pipes complete all as specified and as directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) pipes including necessary fittings, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
S&F 75 mm bore PVC (SWR) pipes including necessary fittings, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
M&L for Khatamband pattern false ceiling design as approved by GE with ornamental wood work made out of 6 mm thick deodar wood and having two coats of varnish (Make: touch wood, of asian paint or equivalent, nerolac, berger paints) over a coat of natural wood primer. The Khatamband to be fixed over 12 mm thick veneered BWR plywood over timber scantling frame work of size 600 mm x 600 mm with second class hardwood 100 mm x 75 mm as main joist and 50 mm x 50 mm secondary joist fixed with nails/screws and finally finishing with french polish (two or more coats) complete all as specified and as directed.
M&L for 15 mm thick 1st class soft wood austrelian wooden paneling fixed with tongued and grouded as wall paneling incl two coat varnishing, polishing and prepration with sneezing including necessary timber scantling and frame work complete all as specified and as directed.
S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts , in roofs, walls etc. with grade of zinc coating 275 complete all as specified and as directed.
S&F 0.63mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.
S&F in repair PP-R gate valve (brass insert) 32 mm outer dia as per requirement of the site complete all as specified and as directed.
S&F in repair vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed.
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) 200mm internal dia set in cement mortar complete all as specified and as directed.
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard/ dense soil complete all as specified and as directed.
Ditto all as per serial item No. 114.00 described here-in-before but depth exc 1.5m and n.exc 3m.
M&L for plain cement concrete (1:3:6), type C2 (using 40 mm graded crushed stone aggregates) as in foundations, filling and mass concrete complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soils complete all as specified and as directed.
Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.
S&F 200 mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and as directed.
M&L for cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in concrete bed to drain pipes 200mm internal bore including packing under and hunching against the sides of pipes after they are laid and tested, in complete all as specified and as directed.
M/S SHIMAR STAR GLACIER
M/S Tajamul Ah Buchh
M/S SUHEEL CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .