Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.4 CrAccepted-AOC NO 30 PERIYAR NAGAR ERODE 638001 | ERODE | TAMIL NADU | 638001 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹2.5 Cr+₹11.3 L (4.74%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹3.5 Cr+₹1.1 Cr (47.4%)Rejected-Finance SUMISHA ARCADE MURARI LANE KAITHAMUKKU PETTAH THIRUVANANTHAPURAM KERALA 695024 | THIRUVANANTHAPURAM | KERALA | 695024 | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | SEA ROCK INFRASTRUCTURE L1 | USHA FIRE TECH L3 | SRI PATHY ASSOCIATES PRIVATE LIMITED L2 |
|---|---|---|---|---|---|---|
| 1.00 | Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling wht rotating wheel to open and close the valve including MS flange of table 'E' bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make:OMEX /KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT. | 30 | Nos | 11,600 ₹3,48,000 | 8,522 ₹2,55,660 Lowest | 11,600 ₹3,48,000 |
| 1.10 | Supply, installation of Fire fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20 mm dia ball valve and open and close spray nozzie, warm clip, etc., as per the standard pattern of nay reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, necessary scaffolding and re-doiing the dismantled portions to its original condition wherever found necessary., etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX /
KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT. | 25 | Nos | 15,650 ₹3,91,250 | 6,380 ₹1,59,500 Lowest | 16,000 ₹4,00,000 |
| 1.20 | Supply, and fixing in position of Fire fighting Application Hose of 63mm dia of 15 metres length binded by coppper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE
GUARD / EQUIVALENT. | 55 | Nos | 10,300 ₹5,66,500 | 5,935 ₹3,26,425 Lowest | 11,000 ₹6,05,000 |
| 1.30 | Supply, and fixing in position of Fire fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzie of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT. | 30 | Nos | 3,800 ₹1,14,000 | 2,218 ₹66,540 Lowest | 3,900 ₹1,17,000 |
| 1.40 | Supply of Fire fighting Application Application MS Hose Box to keep two number of hoses and 1 no. of branch pipe with nozzie having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT. | 30 | Nos | 8,922 ₹2,67,660 | 6,300 ₹1,89,000 Lowest | 9,000 ₹2,70,000 |
| 1.50 | Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI coller for each sprinkler bulb, mounted in MS pipe ling using suitable size MS threaded coupling, thread, shellac etc., as per standard mehtods and including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT. | 450 | Nos | 520 ₹2,34,000 | 307 ₹1,38,150 Lowest | 550 ₹2,47,500 |
| 1.60Supply, erection, testing and commissioning of MS ‘C’ Class heavy duty pipe as per IS 1239,to withstand a developing pressure of 10kg/sq.cm including necessary fittings like MS flange of table ‘E ‘ Elbows, reducers, gaskets, both, nuts with washers & Joints as per standard method of arc welding .Including one coat metal primer and two P.O RED painting including conveyance ,all incidental charges ,necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. Make; JINDAL/EQUIVALENT. | ||||||
| 1.70 | 200 mm dia | 60 | Mtrs | 4,700 ₹2,82,000 | 4,113 ₹2,46,780 Lowest | 5,100 ₹3,06,000 |
| 1.80 | 150 mm dia | 740 | Mtrs | 3,400 ₹25,16,000 | 2,630 ₹19,46,200 Lowest | 3,800 ₹28,12,000 |
| 1.90 | 100 mm dia | 390 | Mtrs | 2,380 ₹9,28,200 | 1,803 ₹7,03,170 Lowest | 2,700 ₹10,53,000 |
Tender Value
₹2.9 Cr
EMD Value
₹2.9 L
Closing Date
11 Aug 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
THE COMMISSIONER
Salem City Muncipal Corporation, Fort Main Road, Salem
Providing Additional Amenities in Old Bus Stand Package-2 - Fire Fighting , CCTV , Public Announcement System Etc,
2023_MAWS_342165_1
SSCL/4795/2017-3
Open Tender
Civil Works
Lump-sum
90 days
SALEM CITY MUNICIPAL CORPOATION
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹2.9 L
Yes
14 Nov 2026
12 Jul 2023
11 Aug 2023
12 Jul 2023
11 Aug 2023
12 Jul 2023
Amount
Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling wht rotating wheel to open and close the valve including MS flange of table 'E' bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make:OMEX /KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
Supply, installation of Fire fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20 mm dia ball valve and open and close spray nozzie, warm clip, etc., as per the standard pattern of nay reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, necessary scaffolding and re-doiing the dismantled portions to its original condition wherever found necessary., etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
Supply, and fixing in position of Fire fighting Application Hose of 63mm dia of 15 metres length binded by coppper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
Supply, and fixing in position of Fire fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzie of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
Supply of Fire fighting Application Application MS Hose Box to keep two number of hoses and 1 no. of branch pipe with nozzie having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI coller for each sprinkler bulb, mounted in MS pipe ling using suitable size MS threaded coupling, thread, shellac etc., as per standard mehtods and including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
Supply, erection, testing and commissioning of MS ‘C’ Class heavy duty pipe as per IS 1239,to withstand a developing pressure of 10kg/sq.cm including necessary fittings like MS flange of table ‘E ‘ Elbows, reducers, gaskets, both, nuts with washers & Joints as per standard method of arc welding .Including one coat metal primer and two P.O RED painting including conveyance ,all incidental charges ,necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. Make; JINDAL/EQUIVALENT.
200 mm dia
150 mm dia
100 mm dia
80 mm dia
50 mm dia
25 mm dia
Wrapping and coating anti-corrosive treatment for underground MS pipe having one coat of anti- corrosive metal primer ,one layer of Asphalt Tar tape wound over the M.S Pipe as per standard methods as per standard specification as directed by the departmental officers.
150 mm dia (Yard Hydrant).
Supply, erection, testing and commissioning of following sizes heavy duty foot valve including all accessories such as MS flange of table ‘E’ gaskets,bolts&nuts,etc.,installed at end of 150/200 mm dia suction pipeline at sump including conveyance ,all incidental charges ,necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. Make :NORMEX/KARTAR.
150 mm dia (Pump Room)
100 mm dia (Pump Room)
Supply ,erection, testing and commissioning of Cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’ gaskets , bolts & nuts including conveyance all incidental charges ,necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.Make:NORMEX/KARTAR
150 mm dia
100 mm dia
Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead, tank at terrace level near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312. including conveyance, all incidental charges, necessary scaffolding and re-doing dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.
150 mm dia
100 mm dia
80 mm dia
Supply, erection, testing and commissioning of Gun metal Gate valve of size 50mm dia including necessary MS flange of table ‘E’ gaskets, blots & nuts, etc. installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. Make:LEADER/EQUIVALENT.50 mm dia (Pump room, All Floor Sprinkler branch – 1st floor to 6th Floor) .
Supply, erection, testing and commissioning of Gun metal non-return valve of size 50mm dia including necessary MS flange of table ‘E’ gaskets, bolts & nuts, etc., installed at pump house delivery line for the purpose of priming to suction line so that to control one way including conveying, fixing and incidental charges etc complete as per standard specification and as directed by the departmental officers, Make: LEADER/ EQUIVALENT.
Supply and providing 1000 Litres capacity priming tank made up of PVC Make: The rate including cost and conveyance of all materials to work site .SINTEX/EQUIVALENT.
priming tank mounted with the supporting arrangement fabricated using MS angle for the height of 3.00 mtrs from the floor level, inlet, outlet, and drain arrangements inside the fire fighting pump room as directed by the department officers.
Supply and laying of following sizes of armoured Aluminium/Copper cables for electrical motor. control Panel, Pressure switch, jockey motor etc. all incidental charges necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc.Make.POLYCAB/PARACON/FINLOEX/EQUI VALENT.
3 cores 185sqmm armoured aluminium cable (Pump Room)
3 core 10 sqmm armoured copper cable (Pump Room)
10 core 2.5 sqmm armoured copper cable (Pump Room)
2 core 2.5 sqmm armoured copper cable (Pump Room)
Earthing arrangements with GI earth plate including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work. Refilling the sides of foundation with excavated earth as per the standard specification and as directed by the department officers.
Supply, erection, testing and commissioning of pressure Gauge with 0 to 141 kg range of reputed make with necessary value, milling thread Ms coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance. All incidental charges, necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc. complete as per standard specification and as directed by the departmental officers. Make: H - GURU/ISIMARK/EQUIVALENT.
Supply, erection, testing and commissioning of suitable Pressure switch of reputed make line indfoss or Donfoss including necessary values, couplings etc. connected with electrical main control panel and setup at proper differential so as to auto start& auto stop the electrical motor. Jokey motor including conveyance. all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary metering protections & indications complete as per standard specification and as directed by the departmental officers. Make:
Supply erection testing and commissioning of fire fighting application horizontal centrifugal type pump rated for 2280 LPM at 70 mtrs head with electrical motor of 60 HP of 415V, 3 phase connection, complete with base plate and accessories.
Supply, Installation, Testing and commissioning of Diesel engine driven main Fire Pump suitable for automatic operation and consisting of following complete in all respects as required (a)1 No. Horizontal split Casing centrifugal type fire pump capable of delivering 2850 LPM against a total head of 110 mtrs so as to ensure a minimum pressure of 3.5 Kg per sq cm at the farthest top most hydrant/ Outlet with pump casing of cast iron to grade FG 200, IS 210-1978 and parts like Impeller, shaft sleeve, bearing ring etc of non corrosive metal either like Bronze, brass or Gun Metal and shaft stainless steel. b) 68 HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete. c)Auto starting mechanism, 12 volts 24 volts electric starting equipment like self Motor, Dynamo, Solenoid switches etc. d)110 ltrs capacity Diesel tank mounted over stand fabricated using 25mmx25mmx6mm size MS angle, providing with level indicator, inlet port, outlet port, drain port and diesel return line port and fuel pre filter, after filter etc.
Supplym erection, testing and commissioning of 180 LPM, 70 metres, Head Pressurization Pump with 7.5 HP electrical motor of Kirloskar make with suitable base frame incluidng necessary vibration bad mounting etc.,m including conveying, fixing and incidental charges, etc., complete as per standard specification and as directed by the Departmental Officers. Make : KIRLOSKAR / EQUIVALENT.
Supply, erection, testing and commissioning of Fire fighting 4 way fire brigade inlet with necessary Gun metal 63 mm dia non return spring shutter arrangements so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry, including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. Make : KIARTAR/OMEX/ EQUIVALENT.
Supply, erection , testing and commissioning of Air release valve of 20mm dia so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. Make: KARTAR/ EQUIVALENT.
Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) powder type Fire Extinguisher of 6 kgs capacity as per IS: 15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.Make: EXCELLENT/SAFETY FIRST/ EQUIVALENT.
Supply and fixing of carbon-di-oxide Gas type 2 kg capacity Fire Extinguisher as per New IS No. 15683 complete with with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., Including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. EXCELLENT/SAFETY FIRST/EQUIVALENT.
Supply and fixing of pre-fabricated steel structural materials using MS angle, channel, plate and similar sections for supporting suction and delivery pipe and manifold of fire pumps. The quoted rate shall includes necessary bolt, nut etc. and one coat of primer and synthetic enamel painting of approved shade and as directed by departmental officers.
Supply, Installation, testing and commissioning of Microprocessor based conventional 12 zone fire alarm control panel having the rating of 24 Vot DC power supply, consisting 230/24 volt SMPS unit, 2 Nos 12 Volt 7 AH stand by batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the departmental officers.
Supplying, installing, testing and commissioning of conventional Smoke Detector with base and as directed by departmental officers
Supplying, installing, testing and commissioning of conventional Electronic Hooter with base and as directed by departmental officers.
Supplying, installing, testing and commissioning of conventional Manual Call Point with base and as directed by departmental officers.
Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers.
Supply and Installation of the following CCTV Arrangements with required materials and labour charges at work site etc. complete as directed by the departmental engineers..
Supplying And installation of CCTV arrangements in required places.
Hikvision 64-ch 2U 4K AcuSense NVR
Hikvision 5mp IP bullet camera
Hikvision 2MP 1920x1080P@30fps 25X Zoom WDR 100m
5 KVA UPS 48v sine wave Supports 4 batteries
200 Ah Battery AH Tall Tubular Inverter Battery Distelled water level indicator
Power Cable 1.5SQ 2Core
Netfox 8port giga Poe 1SFP
Tplink JetStream 24-Port SFP L2+ Managed Switch with 4 10GE SFP+ Slots
42U Rack 600/600 floor mount
4U Rack 400D Rack
Netfox Cat6 Indoor 305M
Netfox Cat6 Outdoor 305M
10TB HDD WD
Tower server Basic model
55" LED TV OEM
SFP Module 20KM 1G
12F Optical fiber cable.
Pigtail 3M.
Enclosure box.
FMS 24 port.
Power manager 6 socket.
Power manager 10 socket.
Installation Materials.
Installation Charges.
Supply and Installation of the following Public Addressing System with required materials and labour charges at work site etc.complete as directed by the departmental engineers..
AHUJA SSA-5000DP500 WATTS with Built-in Digital Player
High Wattage PA Mixer Amplifier
7 Mic & 2 Aux Inputs.
Built-in MP3 player with remote control for USB, SD/MMC card reader.
Preamplifier and Line Output for connecting to a Booster Amplifier.
Line Input for connecting the output from any external mixer or another amplifier.
Resettable circuit breaker for protection against overload and short circuit.
Instant transfer to DC power (Car Battery) if AC power fails.
AHUJA AMH-402T 40 WATTS
Unique concept used to create a well-enginered 2-way PA Music Horn with high efficiency, long throw, and wide frequency response.
Sound quality of exceptional richness, clarity and fidelity. Ideal for music as well as announcements.
Rugged & sturdy construction with aesthetically superior finish. UV protected ABS plastic housing.
Comprises of a highly efficient 15.24 cm (6”) Kevlar cone LF driver and a 2.54 cm (1”) HF driver for wider frequency response and higher SPL.
Strong mounting bracket for rigid mounting.
Ideal for both Indoor and Outdoor applications: Railway Stations…Educational Institutions… Religious Places… Stadiums… Amusement Parks…Factories… Cruise Liners… etc. Complete as directed by the departmental engineers.
AHUJA ACM-96CHPaging Micr with MULTI Tone Chime
Single zone desktop paging microphone with a sturdy, aluminium die-cast top and special high reliability switches with integrated LED indicators.
Fitted with a flexible 300mm (12”) gooseneck and a high quality unidirectional dynamic cartridge. Supplied with 6 mtrs. twin core shielded low noise cable with 6.3mm (¼”) phone plug.
ACM-96CH is also provided with a multi tone electronic chime, and operates on 2×1.5V (UM-3) pencil cells. Desired chime sound level can be set through preset at the bottom side of ACM-96CH.
20/36 2 core speaker cable.
CIVIL WORKS ( Fire Fighting Sump & Machine Room )
ORDINARY SOIL (SS20A) Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in Crushed stone sand , silt or other loose soil, wet Crushed stone sand y loam and ordinary soil including excavated earth etc., complete.
Cement Concrete 1:4:8 (one cement four Crushed stone sand and eight aggregate) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification.
Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification. (Payment for centering shall be given after the concrete is laid).
For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.
For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.
Providing and laying R.C.C M30 grade for all RCC works using 20mm HBGS and down graded HBGS by adopting weight basis (the ratio of cement, fine aggregate, Coarse aggregate and admixture) has to be got approved from the approved laboratory excluding cost of centring and reinforcement grill but including laying, compacting, curing etc, and on directed by Engineer in charge of works complete with Standard specification.
Ground Floor.
Supplying, fabricating and placing in position Ribbed Tor Steel / TMT bars for all RCC works as per design given including cost of steel and binding wire in all floors etc. complete complying with standard specification.
Brick work in following Cement Mortar using best quality country Brick 230 x 110 x 75mm in CM 1:5 for foundation and basement including curing, etc., complete complying with standard specifiction.
Ground Floor.
Brick partition walls of 10.80cm thickness using country Brick 230 x 110 x 75mm in Cement Mortar 1:3 (One Cement and Three Crushed stone sand ) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately).
Ground Floor.
Plastering with Cement Mortar 1:5 (One Cement and Three Crushed stone sand ) 15mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Crushed stone sand ) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers .
Manufacturing Supplying and fixing of pull and push type steel rolling shutter with approved make and size, using 18 guage 75mm wide cold rolled steel laths of convex corrugation, with side guides, and bottom rail, with interlocking arragements for steel laths by maens of alternat clips, suspension shaft with high tension coil type springs two numbers, mounted on specialy designed pipe shaft, with bracket plats, guide channels, ball bearing arrangements, for inside and outside locking with push and pull opretion, pulling hook, four numbers of handles with all fitting and accessories. The top cover made out of 20 gauge M.S Sheet over pull and push rolling shutters bent to shape. The rate includes all meterials, labour charges for fixing in position and one coat of red oxide primer etc complete as directed by the departmental officers.
Fabricating Supply and fixing and position of MS doors & windows with double leave made out of 18 gauge M.S. sheet, outer frame 35x35x5mm angle, inner frame 25x25x5mm angle, cross stiffner with MS flat 25x5mm, altrop tower bolts 2 Nos. two handles and six holdfasts completed welded and rivetted and one coat of red oxide painting including cost of all materials and labour etc., complete.
Providing and laying in position of PVC Drain Spout for flyovers at sutiable places at the direction of departmental engineers. Complete as per standard specifications.
Providing and laying in position of 8" x 8" MS Grattings for flyovers at sutiable places at the direction of departmental engineers. Complete as per standard specifications .
SRI PATHY ASSOCIATES PRIVATE LIMITED
USHA FIRE TECH
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .