Supplying installing testing and commissioning of 45KVA 3 Phase CPCBII, Approved silent standard control panel DG set to the Office of Deputy Director Health, Port Blair

Amount

Supplying installing testing and commissioning of " KIRLOSKAR iGREEN" Make,3R1040TA G1 Model,56 HP @1500 RPM, Three Cylinder, vertical, water cooled diesel oil Engine Directly coupled with "KIRLOSKAR iGREEN" Make AC Alternator,3 phase, 415 Volts,50 Hz @ 0.8 P.F. Self excited, self regulated designed to Run at 1500 RPM suitable for 36KW/45 KVA DG Set with acoustic enclosure(sound proof) as per central pollution control board(CPCB-II) approved DG set.

Designing, supply and commissioning of Inbuilt automatic mains failure panel for 45 KVA capacity Genset of suitable size with following technical specification.

1. Electricity board supply loading/unloading in off/manual/auto mode.

4.Interlocking loops with solid state logic circuit to avoid shorting of EB supply side and generate supply side.

5.Short circuit protection system for both EB side and generator side.

6.Over load protection system for generator.

7.Single phase prevention system.

8.Phase sequence sensing system

9.Time sensing system for all operation.

10.Short circuit protection for DC circuit,

12.SMPS type automatic battery charging system.

13.By pass agreements.

Supplying of one number XLPE insulated PVC outer sheathed with galvanised round steel wire or steel srtip armoured aluminium conductor power cable of 1.1 Kv grade of following size conforming to IS 7098 (Part-I) 1988 amended upto date.

50 Sq.mm x 3.5 Core.

Supplying and fixing of 63A TPN busbar chamber (AL) wth 4 outgoing ways

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)