Petty Repair of internal BR nature of work, Plumbing, Sanitary Fitting work in Md Accn at Old and New Chitral Line and Basantra Line in the area of AGE B/R-III under GE (West) Delhi Cantt-10

Amount

Note : (i) All items to be executed in G+3 bldg.

Inspection and rectify the problem of under ground sewage of all nature i.e. blockage of WHB, bottle trap, urinal, sink, floor trap Nahani traps, WC gully trap, vertical CI pipe/PVC pipes of any dia including junction holes of any description ,sewer/rain water line, manholes in any situation of building for cleaning manually using bamboo or other eqpt / mechanically as per requirement at site and removing blockage from entire system and making it fully functional in the area of OCL,NCL and Basantra line in the AOR of AGE B/RIII complete all as specified and as directed. It also includes the removal of sludge / night soil produced by daily cleaning beyond MOD land immediately after drying. Note:- (i) Contractor shall arrange suitable mechanical equipments incl necessary form work/scaffolding and safety measure complete all as specified and directed. (ii) In addition to above, Contractor shall arrange mechanical rodding with vibrating/ drilling concept i.e trolley mounted sewer cleaning machine once in every month for cleaning entire sewage system and free of any sludge/ blockage. (iii)The above aspect shall be deemed to be included in the quoted rate of this item.

Inspection and rectify the problems of water leakage from taps, WCs, flushing cistern, urinals, wash basins, bottle traps CI trap from ceiling etc and any obstruction to water supply requiring plumbing work and carry out minor repairs such like replacement of washers, check nuts, tightening of fittings, adjustment of float valves and syphon fittings of flushing cistern, cleaning of bottle traps etc in the area of OCL,NCL and Basantra line in the AOR of AGE B/RIII all as specified and directed. Note:- In addition of above Contractor shall arrange suitable T&P such as die set (1/2" to 1") washers of all size, safeda, thread (soot), M-seal, screws, nails and the like incl necessary form work and scaffolding and safety measures to make it functional and leak proof complete all as specified and directed. The above aspect shall be deemed to be included in the quoted rate of this item.

Inspection and rectifying to water leakage from kitchen, toilet & bath CI/PVC pipes in shaft and balcony ,CI trap from ceiling, connecting U/S pipes etc and any obstruction to water supply requiring plumbing work and carry out minor repairs in the area of OCL,NCL and Basantra line in the AOR of AGE B/RIII all as specified and directed.In case of no water problem ,to rectify it, work shall be executed at any floor in shaft of building upto 9th storey,therefore the provision for safety belt has to be made by the contractor himself. The above aspect shall be deemed to be included in the quoted rate of this item.

Inspection and rectifying of carpentary work (wooden/steel/aluminium) iron/aluminium mongery, palmet box, door springs, rolling shutters, venetion blinds etc requiring carpentry work and carrying out minor repairs such like tighting of screws/nails easening of joinery door spring etc in the area of OCL,NCL and Basantra line in the AOR of AGE B/RIII . complete all as specified and directed. Note:- In addition above Contractor shall arrange suitable T&P such as (screws/nails, plugs, grease,putty welding rods & portable welding machine drill machine & bid) etc including necessary form work/scaffolding and safety measure to make it functiona lncl all as specified and directed. The above aspect shall be deemed to be included in the quoted rate of this item.

Inspection and rectifying of black smith work to welding work in repairs to steel windows/doors, handles, door springs, iron frame of doors, rolling shutter and other iron misc works ,repair by welding run or spot welding complete as per site requirement in the area of OCL,NCL and Basantra line in the AOR of AGE B/RIII complete all as specified and directed. Note:- (i) Contractor will arrange suitable T&P such as RIKSHAW, welding machine, gloves, welding glass,welding rod etc and any other tools required incl necessary scaffolding and safety measures complete all as specified and directed. (ii) The above aspect shall be deemed to be included in the quoted rate of this item.

M&L for cleaning of existing sewage line of dia 150mm to 300mm from first manhole to final drop outlet into the septic tank or main trunk line by machenical process (by super saucer machine) or jetting machine by injecting water pressure with cutting tools compressure etc. all as specified and directed including removal of sludge/mud/ silt (liquid or dry) in foul position out side of MOD land including takingout manhole covers, sludge cleaning from manholes and refixing the same in position and making good to disturbed portion if any, complete all as specified & directed.

M&L for cleaning of exsting of sewage manholes of any size any depth bailing out of sludge/mud or silt solid or semi solid materials deposited in manholes with mechanical means / appliances and removal of the same out of MoD land and burrying the entire solid/semi solid material under ground including excavation of suitable pit for it complete all as specified & directed.

M&L for cleaning of sewage line with super sucker machine with 3000 ltr sludge slurry capacity, with and including sucking in, pumping out of MoD land and carrying staff and appliances which are essential for entire removal process, complete all as specified & directed.

Hacking out old broken glass any thickness, size quality or description from wooden/steel frame fixed with wooden beads/metal pinning complete all as specified and directed

S&F 4 mm thick plain sheet glass in square not exc. 0.50 sqm in each pane, fixed with pin headed beads or putty (in metal frames etc) complete all as specified and directed.

S&F 4 mm thick figured sheet glass in square not exc. 0.50 sqm in each pane, fixed with pin headed beads or putty (in metal frames etc) complete all as specified and directed.

S&F in repair stainless steel wire cloth with stainless steel 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with wire staples (for windows and gauzed doors) all as specified and directed

S & F in repair stainless steel pipe of 25 mm dia for curtain rod including fixing with bracket & funnel/bulb complete all as specified & directed. Note: Only SS pipe will measured for payment purpose.

S & F in repair brass spindle for bib tap, pillar tap, stop cock,angle valve of any description etc complete all as specified & directed.

S & F in repair concealed brass spindle/phase any type for cocealed stop cock for shower of any description etc complete all as specified & directed.

S & F in repair 15 mm dia bib tap cast copper alloy chromium plated with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified & directed.

S & F in repair CP shower rose 150x150mm with 190mm long shower arm rod all as specified and directed.

S&F in repairs 15mm Brass CP wall mixer for mixing hot & cold water 15mm dia chromium plated , complete all as specified and directed.

S&F in repairs 15 mm dia stop valve cast copper alloy chromium plated with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repairs 15mm dia angle valve, chromium plated, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe on for unions, complete all as specified and directed.

S&F in repairs Two way Bib cock, fancy type chromium plated cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule of 15mm size and fixed complete all as specified & directed.

S&F in repairs Health Faucet mild steel chromium plated suitable for 15 mm dai pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & directed.

S&F in repairs factory made SFRC manhole covers 80mm thick, M-30, medium duty of size n.exc 1.00 Sqm each, complete all as specified and directed.

S&F in repairs 110 mm bore PVC Pipes single socket, including all necessary tee, socket & bend as required in position complete all as specified and directed.

S&F in repairs 75 mm bore PVC Pipes single socket, including all necessary tee, socket & bend as required in position complete all as specified and directed.

S&F in repairs PVC bend/tee suitable for 110mm bore pipe complete all as directed

S&F in repairs PVC bend/tee suitable for 75mm bore pipe complete all as directed

S&F in repairs 12mm thick Medium density fibre board (false ceiling), exterior grade, fixed to timber framework with screws other side balancing white lamination, fixed with screw to timber frame work omplete all as specified and directed.

M&L applying white cement around gratings, traps, brackets etc complete all as specified and directed.

M&L for Glazed ceramic colour tiles in vertical surface of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick cement plaster in CM 1:4, including dismantling of wall tiling including cement mortor bedding (but not backing removing serviceable to store and rubbish off the premises all as specified and directed.

M&L for Non Skid jointless ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.18 sq m but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6,including dismantling of floor or hearth tiling including cement mortor bedding (but not backing removing serviceable to store and rubbish off the premises all as specified and directed.

Uprooting and removing of wild growth trees from wall/roof/chajjas/CI pipes etc any location on buildings including removal of roots, sub roots upto 15cm girth etc, making good with PCC 1:2:4 or concrete in CM 1:3 as directed and finishes the surface matching with adjoining areas of wall/roof etc upto full height of bldgs (i.e. upto 9th storey bldg), including spaying Herbicide/ Weed killer as per manufacturer's instruction complete all as specified and directed

M&L brick work with old size sub class B brick staight or curved on plan to any radious built in cement mortar (1:6) using sub class 'B' bricks straight or curved on plan exc 6 mtr mean radious including demolition of brick work complete all as specified and directed by the Engr-in-Charge.

M&L rendering 15mm thick ready mix mortar on fair faces of brick work or concrete surfaces of walls/ceiling on external/internal surfaces and finished even and smooth without using extra cement including taking down old plaster of any description on walls complete all as specified.

M&L for rendering 10 mm thick with ready mix plaster patches on fair face of ceiling and finished even and smooth without using extra cement, including taking down cement plaster of any description on brick wall or concrete surfaces including raking out joints in brick work, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for preparation of new surface of wall and apply two coats of Oil Bound Distemper over and including Priming plastered and other surfaces with chalk whitening complete all as specified and directed.

M&L for preparation of new surface of ceiling and apply two coats of Oil Bound Distemper over and including Priming plastered and other surfaces with chalk whitening complete all as specified and directed.

Complete removal of existing treatment of wall using wire brush/mechanical/ electrical driven sanders, washing, rubbing down and stoping of painted surface including preparation of surface etc and applying two coats of cement base paint all as specified and directed by Engineer-in-charge

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube supplying and fixing in opening as per specification & drawing. it shall be wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed

S&F Factory Made Solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beadingand jointed together with solvent cement fixing in the frame at site as per specifications and drawing.it shall be laminated with wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading.complete all as specified and directed..

M&L 75 mm thick, PCC (1:4:8), type D-2 (using 40 mm graded stone aggregate), as in sub base under floor including demolition of cement concrete (unreinforced) in ground floors and paving not exc. 15cm thickness (below or above ground level), complete all as specified and directed by Engr-in-Charge.

M&L 50mm thick fine sand layer spread uniformly over sub base complete all as specified and directed by Engr-in-Charge.

M&L Machine pressed precast glossy finish reflective type concrete interlocking tiles/paver block any colour, shape and size (as approved by GE) conforming to IS 15658 of 60mm thickness M-35 grade including filling the joints upto full depth with fine sand,including dismantling of pavers blocks/tiles of any description or thickness in floors, aprons etc. laid dry or laid dry or pointed, complete all as specified and directed by Engr-in-Charge.

Taking down wooden/steel chowkhats/door frame including shutter (without taking off shutter) not exc.1.5 Sqm each complete all as spd & directed.

S&F for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, angle iron chowkhats; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including fixing of hold fast with bed block of size 200x200x15mm in CM 1:2:4 (using 20mm graded agg complete all as specified and directed. .

M&L 75 mm thick in PCC 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) finished even and fair at top using extra cement and providing joints throughout the thickness of plinth protection, including demolition of cement concrete n.exc 15CM thickness (below or above ground level) acomplete all as specified and directed by Engr-in-Charge.

S&F CP tubular towel rail D type 600mm long 20 mm dia complete all as specified and directed.

S&F 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair grating doom 75mm dia of CP complete all as specified and directed by Engr-in-Charge.

S&F in repair grating doom 100mm dia of CP complete all as specified and directed by Engr-in-Charge.

M&L in repair CPVC pipe 16mm internal dia with all fittings and fixed complete to walls ceilings or laid in floors of medium grade including taking down steel tubing and connections complete all as specified and directed.

S&F in repair European vitretious china wash down water closet pan (excluding flushing cistern but including flush pipe and pvc seat cover white.

Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipe etc for more than 15000 ltrs capacity of tanks over 4 storey bldg, complete all as specified and directed. NOTE:- After cleaning the tank date of cleaning also has to be mentioned with synthetic enamel paint on the outer peripheral surface of tank in proper manner.

S&F aluminium anodized extruded bow handle fabricated type 125mm long complete all as specified and directed by Engr-in-Charge.

S&F in repairs 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs 200mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed by Engr-in-Charge.

S&F in repairs white Plastic water closet seat cover, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs 32 mm PVC waste pipe 900 mm long with complete all as specified.

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair Vitreous China wash hand basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets

S&F door seal aluminium section with brush complete all as specified and direcetd.

M&L in repair GI tube pipe 15 mm including fittings like elbow,union,socket etc incd taking down of old pipe complete all as specified and directed by Engr-in-Charge.

M&L in repair GI tube pipe 20 mm including fittings like elbow,union,socket etc incd taking down of old pipe complete all as specified and directed by Engr-in-Charge.

S&F 30 mm thick Factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge.

Taking down shutter exc 1.5 Sqm nut not exc.2.0 Sqm each complete all as spd & directed.

S&F in repairs 75 mm long mild steel butt hinges, medium weight, cold rolled and fixed.

S&F in repairs sink coupling brass complete all as specified and directed by Engr-in-Charge.

S&F aluminum handles cast type anodised of size 150mm complete all as specified and directed.

S & F in repair 15 mm dia PVC bib tap cast complete all as specified & directed.

SHRI JI ENTERPRISES (BID ID -3065221)

JAIPAL AND BROTHERS (BID ID -3065026)

M/S Ayub Khan (BID ID -3065076)

M/S Parmod Johar (BID ID -3063645)

GLOBAL DEVELOPERS COMPANY (BID ID -3064957)

ABHIMANYU LAMBA (BID ID -3072909)