COMPREHENSIVE MAINT WORK FOR OFFRS MD ACCN AT ZONE-I UNDER GE (SOUTH) MEERUT CANTT

Taking down of chowkhat with shutter (without taking off shutters from the frame) area n-exc 1.50 sqm each complete all as specified and directed

All as per item No 1 here-in-before but area exc 1.50 Sqm but n-exc 4.0 Sqm each complete all as specified and directed.

Taking down of sutters of any description exc 1.0 sqm but n-exc 2 Sqm each complete all as specified and directed.

M&L for Repairing to existing sliding wooden door, including reapir/replacement of wooden/MS frame, shutter, glass, wiremesh, MS channel/rail, pully, and necessary fixing arrengements as per site requirement of approved quality, required to making functional and workable with all aspects, complete all as specified and directed. (Note:-Complete opening area of sliding shutter should be considered as one unit for payment purpose)

Supply and fixing for mild steel framed work as in doors / windows or gates of angle, with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or toeht covering runnign rails and guides) and hanging also fastening and fixing complete conforming to Fe 410-W (Gde-E-250) quality A complete all as specified and directed

Supply and fixing plain framed panelled shutter 35mm thick of 2nd class hardwood, (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkatsist , complete all as specified

S&F, Glazed and skeleton shutters of 2nd class hard wood, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, all as specified and directed.

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete including 03 Nos SS butt hinges 100mm, 02 Nos aluminium tower bolt 150mm in each door as per direction of Engineer-in-Charge.

S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with and including stainless steel butt hinges 03 Nos of size 100mm, aluminium tower bolt 02 Nos size 150mm long, aluminium alloy handles D type of size 150mm 02 Nos for each door complete all as specified and all as per direction of Engineer-In-Charge.

Supply and fixing 100mm long but hinges heavy duty cold rolled mild steel medium weight complete all as specified and directed by Engr-in-charge.

Supply and fixing aluminium anodised barrel tower bolts of extruded section and fixed of 200mm long complete all as specified and directed by Engr-in-charge.

Supply and fixing aluminium alloy anodised sliding door bolt 250mm long with haps staple bolt type and fixing clips of sheet etc complete all as specified and directed by Engr-in-charge.

Supply and fixing 200mm long aluminium handles cast type anodized complete all as specified and directed by Engr-in-charge.

Supply and fixing 300mm mild steel ordinary rat rail rod pattern spring incl roller & roller plate complete all as specified and directed by Engr-in-charge.

M&L for preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over and including a coat of pink primer (by spraying) all as specified & directed

Material and labour for two coats of synthetic enamel paint over one coat of red oxide primer on new or previously untreated steel surface incl preparation of surface over 10cm width or girth complete all as specified and directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid coloured Ceramic tiles,first quality( of approved class , colour and design/ shade ) 7 to 8 mm thick (Square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor surface etc set and jointed in neat cement slurry and pointed in coloured cement to match with shade of coloured tiles over and including 15 mm thick screed bed in Cement mortar 1: 6 Complete all as specified and directed.

M&L for glazed coloured ceramic tiles ,first quality ( of approved class , colour and design/ shade ) of size 450 x 300 x 7 to 8 mm thick in vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with shade of coloured tiles, over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified and directed.

M&L for vitrefied coloured Ceramic tiles,first quality( of approved class ,light Shade, double charged ), 8 to 10 mm thick (Square/ rectangular),polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, as in floor surface etc set and jointed in neat cement slurry and pointed in coloured cement to match with shade of coloured tiles over and including 15 mm thick screed bed in Cement mortar 1: 6 Complete all as specified and directed.

M&L for vitrefied coloured Ceramic tiles,first quality( of approved class ,dark Shade), 10 mm thick (Square/ rectangular),polished, area of each tiles not exceeding 0.36 sqm, ,(cut in required size), fixed on vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with shade of coloured tiles, over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified and directed.

Taking down steel tubing and connections incl cleaning for refixing or removal from site for 15 mm bore pipe complete all as specified and directed by Engineer-in-Charge.

Description all as per item No 22.00 here-in-before but for 20 mm bore pipe

S&F 15 mm bore, Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

All as per item No 24 here-in-before but 20 mm bore pipe.

S&F, 16 mm (outer dia), 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

Supply and fixing 20mm bore tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed by Engineer-in-Charge.Make : JINDAL/PRAKASH/TATA

Refixing only 20 mm bore tubes, any grade, to walls and ceilings or laying in floors

Re-fixing only in repair 15mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe, complete all as specified and directed

S&F in repairs bib taps, cast copper alloy , fancy type, chromium plated, long body with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repairs pillar taps, cast copper alloy, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair angular stop/concealed cock with wall flange, cast copper alloy , fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed both ends for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

Supply and fixing PVC connections 15mm bore, 450 mm length with PTMT nuts complete all as specified and directed by Engineer-in-Charge. Make : Symet/ Prayag

All as per item No 33 here-in-before butlength 600mm.

S&F in repair tubular towel rail , brass, chromium plated, fancy type, min 60 cm long between flanges fixed with and including CP brass screws, rawl plug etc complete all as specified and directed

S&F in repair 125 mm size chromium plated brass shower rose with swivel joints and swivel arms for suitable and screwed for 15 mm bore GI/PVC pipe or to GI/PVC socket complete all as specified and directed.

S&F in repair soap dish/plate , 3mm thick stainess steel of size 300 x 100mm, fancy type , with impression/mould for soap, paste etc alongwith adequet perforations, holes for tooth brush fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.

Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC bend including connection to IWC/EWC and fixing on wall with brackets complete all as specified and directed by Engr-in-charge. Make : Hindware/Paryyware /Prayag /Polytuff

Supply and fixing in repair vitreous china wash down water closet pan, Pedestal Pattern, white excluding flushing cistern including plastic water closet seat white/black, connection to out going pipe and flushing pipe complete all as specified and directed by Engineer-in-Charge. Make : Parry ware/Hind ware/CERA

Supply and fixing in repair vitreous china wash down water closet pan single piece in white shade of size 365x675x740mm, with and including PP soft close slim seat cover, hinges, dual flushing cistern fitting, fixing accessories, S/P trap, and accessories set, including necessary fixing arrangement as per manufactures instruction complete all as specified and directed. Cat Part No :- ECS-WHT-851S220SPPSM of Brand: ESSCO (Jaqar & Co.Pvt Ltd) or equivalent brand or make as approved.

S&F in repair plastic water closet seat cover, white/black, closed pattern with flat bottom and mild steel chromium plated or aluminized hinging device complete all as specified and directed by Engineer-in-Charge.

S&F in repair vitreous china wash hand basin (flat back) of size 580x450mm excluding taps, waste, chain and plug and porcelain stopper but including one number waste fittings, 32 mm dia, brass, chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe 610 mm long with connector, with and including, vitrious china padestal of approved colour, MS brackets and cutting for and pinning in ends of brackets complete all as specified and directed.

Supply and fixing in repair vitreous china wash basin white oval type size 580x 450mm excluding taps but incl 32mm dia CP waste fitting and PVC waste pipe 610mm long and brackets, complete all as specified and directed.

M&L for granite stone black machine cut 18 to 20 mm thick fixed on any surface ie steps, jambs,pillar window cills, cooking platform and the like etc set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including grinding, rubbing and polishing mirror finish and half rounding of the exposed faces of stone , with and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

S&F in repair health fauset ABS body, fancy type with wall hook and one meter stainless steel braided rubber hose pipe suitable and screwed for 15 mm bore GI pipe including necessary fixing arrangement as per manufactures instructions complete all as specified and directed.

S&F in repair grating 100/125 mm dia of ,steel chromium plated with or without hole as required complete all as specified and directed.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys ,scrubbing down with water etc complete all as specified and directed.

Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and even as in wall complete all as specified and directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and even as in wall complete all as specified and directed.

Material and labour for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finished fair and even as in wall complete all as specified and directed.

M&L for preparing new plastered or un-plastered surfaces and applying of wall care putty 1.5 to 2 mm thick on existing prepared surface for smooth finishing and applying two coats of oil emulsion distemper over a coat of suitable primering as a base course as per manufacturer's instructions with using roller complete all as specified and directed.

M&L for preparing new plastered or un-plastered surfaces of walls & applying of wall putty 1.5 to 2 mm thick on existing prepared surface for smooth finishing and applying two coats of weather proof exterior emulsion paint silicon based over a coat of water based suitable primering as a base course as per manufacturer's instructions with using roller complete all as specified and directed.

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed

M&L Brick work with sub class 'B' bricks, old size straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed

M&L Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Supply & fix stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

Supply & fix in repair galvanised stianless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints including jointed with approved adhesive and fixed to wall/ under floor with suitable clamps complete all as specified and directed.

S&F in repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints including jointed with approved adhesive and fixed to wall/ under floor with suitable clamps complete all as specified and directed.

S&F in repair PVC (SWR) bend 75 mm bore, any radius as required and jointed with approved adhesive complete all as specified & directed.

S&F in repair PVC (SWR) bend 110 mm bore, any radius as required and jointed with approved adhesive complete all as specified & directed.

M&L, 75mm dia, PVC (SWR) multi floor trap, with grating including jointing with solvent cement, complete all as specified & directed.

M&L, PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement, complete all as specified & directed.

Supply & fix in repair PVC (SWR) vent cowl 110 mm bore, and jointed with approved adhesive complete all as specified & directed.

Hacking out old broken glasses (any thickness) size quality or description from wooden/steel frame complete all as specified and directed.

Supply & fix 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane incl one coat of synthetic enamel paint to oil putty complete all as specified & directed.

M&L for 18MM thick WPC board both side plain white/ colour fixed anti corrosive fire resistant with screws, solvent cement/adhesive to make kitchen/ cupboard/wardrob/cabinet side, top and bottom shelves inside the cupboard/cabinet incl dismantling the boarding. Complete all as specifie and dirtected. (Note: 1. Incl Each wardrob mortice lock, tower bolt, handle, butt hinges/piano hinges and size & sample approved by Engr-in-charge.

S&F in repair auto hinges for cabinet case complete all as specified and as directed by Engr-in-charge.

S&F in repair stainless steel plain basket of size 17"x20"x6". Complete all as specified and as directed by Engr-in-charge.

S&F in repair stainless steel partition of size 17"x20"x6". Complete all as specified and as directed by Engr-in-charge.

S&F in repair stainless steel cutlery of size 17"x20"x6". Complete all as specified and as directed by Engr-in-charge.

S&F in repair stainless steel grain trolly with stand of size 21"x17"x10". Complete all as specified and as directed by Engr-in-charge.

S&F in repair stainless steel plate basket of size 17"x20"x6". Complete all as specified and as directed by Engr-in-charge.

S&F 20" long telescopic sider to facilitate drawer slide on steel ball bearing fixed with steel screws. Complete all as specified and as directed by Engr-in-charge.

S&F in repair 150mm size stainless steel bright finish handle for cabinet shutter. Complete all as speciifed and as directed by Engr-in-charge.

Supply and fixing factory made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

S&F, Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified & directed.

S&F in repair Tolet paper holder brass, chromium plated of standard size, complete all as specified & directed.

Supply & fix in repair 15mm dia single lever one hole basin mixture of superior quality with capstan heads, cromium plated cast copper alloy with hot and cold arrangements with long shank and cup , screws for iron pipe fixed.as in repairs Make all as specified and directed

Supply & fix in repair 15mm dia single lever one hole wall mixer telephonic type with and including shower of superior quality with capstan heads, cromium plated cast copper alloy with hot and cold arrangements with long shank and cup, screws for pipe fixed Make all as specified and directed

Please Enable Macros to View BoQ information