SPECIAL REPAIR TO BLDG NO T 31 RECREATION HALL OF ESD KANKINARA UNDER GE NORTH KOLKATA

Amount

Dismantling of wall and ceiling boards ( fibre , pulp ,insulation etc ) or insulation boards /slabs/blankets , any thickness , including cover fillets complete all as specified & as directed .

Supply and fix anodized aluminium snap grid frame work (size of grid 605x605mm) for false ceiling including suspenders / hangers 6mm dia GI wire (upto 1200 mm length) adjusting level fixed to roof sheds by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm ling and expansion hold fasteners 12.5 mm dia 40 mm long, complete all as specified and directed.

Supply and fix of 6 mm thick high pressure steam cured non asbestoes fibre cement designer ceiling board of size to suit grid mould (605x605 mm as specified above) and fix in grid mould with necesssary fixing arrangement as per manufacter's instruction complete all as specified and as directed. (Make : Everest/Rhino/Charminar)

Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for Cement concrete 25mm thick type B-1, 1:2:4 (20mm graded stone aggregate) as in floors complete all as specified and as directed.

Material and labour for light shade vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles exc 0.18 sqm and nexc 0.38 of each tile in floor set and jointed in neat cement slurry & pointed in white cement and pigment to match the colour of tiles over and including 15mm thick screed bed in cement mortar (1:6) complete as specified and directed.

Material and labour for light shade vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles exc. 0.18 sqm but n.exc. 0.36 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.

Material and labour for non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles (300x200) x7mm thick in skirting/dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.

Material and labour for Granite (of any type) work 20mm thick (table rubbed and polished) in steps, jambs, pillars, win?dow-cills, cooking plat?forms and like in cement mortar (1:4) including point?ing in white cement (1:2) us?ing marble dust with admix?ture of pigment to match including 10mm thick rendering in CM(1:4) with shade of granite complete all as specified and as directed.

Surface dressing n exc 15 cm deep in soft loose soil complete all as specified and as directed.

M&L Pre-polished Chequered cement concrete tiles 30cmx30cm25mm thick over 20mm thick screed bedding layer of mortar in CM(1:6) for laying floor finishes set jointed with grey cement and pigment and pointed in neat cement slurry in floors, complete all as specified and as directed

Material and labour for Hardcore stone of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

Dismantling plain or corrugated steel sheeting,Galvalume sheet any gauge , thickness , including roof covering / wall etc for the building structures not exceeding 10 m height from the average ground level complete all as specified and as directed .

Dismantling timber scantlings 40 sq. cm and over in section, in any position

Supply and fix Rolled mild steel in Joist, channel, angle, or tee sections, Fe 410 -W (GdeE- 250) quality A fixed independently, without connecting plates, etc.complete all as specified and as directed

Supply and fix Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet for ridge 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Demolition of brickwork built in cement mortar complete all as specified and as directed .

Material and Labour Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed .

Excavating trenches, not exceeding 1.5 m wide or not exceeding 10 sq m on plan and not exceeding 1.5 m in depth for foundation of manhole etc and getting out as in Soft/loose soil complete all as specified & directed.

Returning filling including spearding levelling watering and well ramming in layer n. exc. 25 cm in soft/loose soil copmplete all as specified & directed.

Removing excavated soil n.exc 100 mtr and deposited where directed at a level n.exc 1.5 m above the starting point complete all as specified .

Material and labour for providing cement concrete in foundations 1:4:8 type D2 (using 40mm graded stone aggregate) filling and mass concrete complete all as specified & directed

Material and labour for RCC (1:2:4) (20mm graded aggregate )as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar complete all as specified and as directed

Supply and fix rotational moulded polyethylene water storage tanks (multi layer) 1000 ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed including taking down old unserviceable one

Material and labour for PCC 1:3:6 Type C-1 ( using 20 mm graded stone aggregate ) as in surface channel complete all as specified and as directed .

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete , using extra cement complete all as specified and as directed .

Add or deduct for each 25 mm girth or part thereof over or under 30 cm complete all as specified and as directed .

Material and labour for rendering 15 mm thick on fair faces of brick wall or concrete surface (for internal surface of drain ) in cement mortar 1:3 mixed with intgral water proofing compound as per manufacture instruction and finished even and smooth with using extra cement complete all as specified & directed.

Material and labour for RCC (1:2:4) Type B1 (using 20 mm graded stone aggregate ) as in slab supported on wall including demolition of existing unserviceable RCC slab compplete all as specified and as directed .

Taking down cement plaster on brick or stone wals, etc. including raking out joints, hacking for keys, scrubbing down with water, etc. complete all as specified and as directed .

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified and directed.

Material and Labour for 20 mm thick rendering with CM 1:4 in two layer , 10 mm thick in each layer and mixed with integral water proofing liquid admixture on top layer of external surfaces of brick work or concrete surfaces including finish the surface even and fair complete all as specified and as directed (Water proofing liquid admixture shall be measured and paid seperately)

Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer over 3mm thick wall care putty on wall complete all as specified and as directed.

Complete removal of existing treatment on plastered surfaces of walls including washing, rubbing down and stopping of old treatement and material and labour for applying two coats of oil bound distemper over a coat of alkali resistant primer to walls etc complete all as specified and as directed.

Preparation of new plastered surfaces of wall and applying two coats of anti fungal paint over a coat of cement primer complete all as specified and as directed.

Complete removal of existing treatment on plastered surfaces of walls including washing, rubbing down and stopping of old treatement and material and labour applying two coats of anti fungal paint over a coat of cement primer complete all as specified and as directed.

Supply and fix 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal from site complete all as specified .

All as per Item No-43 above but, of 20 mm bore.

Cutting Chases , pinning in , making good to facing where required and pointing in CM 1:3 to ends or edges of landings , steps , cills , sunshades , shelves , lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good of cutting in brick wall n.exc 10 cm girth complete all as specified .

Supply and fix 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall and celing or laid in floors etc complete all as specified and as directed.

All as per item No. 46 above but 20mm bore.

Supply and fix in repairs 15mm bore bib tap fancy type chromium plated cast copper alloy with crutch or butter fly handle complete all as specified and as directed.

Supply and fix in repair stop cock 15mm bore fancy type, chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and as directed.

Supply and fix in repair pillar tap of 15mm bore, cast copper alloy with capstan heads fancy type, chromium plated screwed down, high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including PVC connections 15mm size with brass nuts and washer both side of length 450mm complete all as specified and as directed.

Supply and fix in repair Vitreous china wash down water closet pan, semi pedestal pattern (Anglo Indian Type), white including plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device suitable for Anglo Indian Type pedestal pan (excl flushing cistern and flush pipe) complete all as specified and as directed.

Supply and fix in repairs vitreous china wash basin white flat back, size 630 x 400 mm including PTMT waste coupling 32mm dia (min wt 45 gm), chain and plug and porcelain stopper etc. complete all as specified and as directed.

Supply and fix in repair brass chromium plated tubular towel rail , 20mm dia, D type, 600mm long between flange fixed with chromium plated brass screws complete all as specified & directed.

Demolition and breaking up of existing unserviceable UPVC(SWR) pipe 110 mm dia single socketed in any length with rubber ring joint , laid in trenches or in floor all complete as specified .

Supply and fix UPVC(SWR) pipe 110 mm dia single socketed in any length with rubber ring joint , laid in trenches or in floor all complete as specified .

Supply and fix in repair 110 mm bore UPVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified .

Supply and fix in repair 110 mm bore PVC (SWR) junction single 'T' equal or unequal complete all as specified and as directed .

Supply and fix in repair 110 mm bore PVC (SWR) bend , any radius complete all as specified .

Supply and fix in repair 110 mm bore PVC (SWR) Vent Cowl complete all as specified .

Taking down chowkahts of frams with shutters (without taking off shuttera from the frame) not exceeding 1.5 sqm each complete all as specified and as directed.

All as per item No-62 of above but exc. 1.50 and n.exc. 4 Sqm.each complete all as specified and as directed.

Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and as directed.

Material and labour Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed .

Supply and fix 100mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

Supply and fix 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 250 mm longAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply only 100 mm long MS Butt hinge , medium weight , cold rolled complete all as specified and as directed .

Material and Labour applying two coats of Synthetic enamel paint over a coat of pink primer on new wooden surface exc 10 cm width or girth complete all as specified and as directed .

Material and labour for one coat of synthetic enamal paint to wooden surface exceeding 10cm width or girth incl preparation of old painted wooden surfaces complete all as specified and directed.

Material and labour for applying one coat of synthetic enamal paint on steel surface of any description over 10cm widht or girth including preparation of old painted surfaces complete all as specified and as directed.

Material and Labour applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surface exc 10 cm width or girth complete all as specified and as directed .

Supply and fix Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

Supply and fixing factory made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi?chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour Two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made UPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in?Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Make for item No 77 to 79 : Kumar Arch Tech Pvt Ltd/Sintex india Ltd/Rajshri Plastiwood Ltd/Marino/M/s Yashashri Polyextrusion Pvt. Ltd

Supply & Fix 4.0 mm thick Sheet glass,ordinary quality and glazing with oil putty in square or rectangular exc 0.5 sq. m in each pane.

Supply & Fix 4.0 mm thick Sheet glass,ordinary quality and glazing with oil putty in square or rectangular n exc 0.5 sq. m in each pane.

Supply and fix in stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads as required complete all as specified and as directed.

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.surfaces, complete all as specified and directed by Engr-in-charge.

Taking down exhaust fan / wall mounted fan any type or size from existing position of high rise shed/ bldg, dismantling blades and removing fan and blades complete all as specified and keep in safe custody refixing th same complete all as specified and directed by Engr-in-charge.

Material and labour for concealed point wiring (concealed type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit medium grade of suitable size but not less than 20 mm and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of switches switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth complete all as specified as directed for One light point controlled by one switch complete all as specified and directed. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of chase cutting for wiring shall bemeasured and paid separately.

All as per iem No. 85 above, but for One ceiling fan/ exaust fan point controlled by one switch and one regulator complete all as specified and directed.

All as per iem No. 85 above, but for One 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and directed.

All as per iem No. 85 above, but for One 3/5pin 6 Amp Socket outlet on the same board complete all as specified and directed.

All as per iem No. 85 above, but for One call bell point controlled by one switch complete all as specified and directed.

Material and labour for concealed point wiring (concealed type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit medium grade of suitable size but not less than 20 mm and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of 16 A switches, sockets, etc and earth continuty conductor shall be connected to common earth complete all as specified as directed. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate. (iii): Cost of chase cutting for wiring shall be measured and paid separately

Supply and fix switch piano flush buttom 5 Amp single pole one way 240 volt all as specified and directed

Supply and fix socket out let 3/5 pin 5 Amp 240 volt.all as specified and directed

Supply and fix switch socket combination 3/5 pin 5 Amp 240 volt.all as specified and directed

Supply and fix switch socket combination 3/6 pin 15 Amp flush type 240 volt.all as specified and directed

Supply and fix celling fan regulator (step regulator) switch type AC 230 volt suitable for ceilling fan any sweep all as specified and directed

Supply and fix bell push 6 amps complete all as specified as directed

Matetial and labour for call bell ding dong type AC 230 volt single pole complete all as specified as directed

Matetial and labour for lamp holder PVC/Polycarbonate type with backplate suitable for battel fittings complete all as specified as directed

Supply and fix celling rose surface,3 terminal of min da 63.5mm and ISI marked all as specified and directed

Supply and fix box type luminiare, pre coated in white and pre-wired for single LED tube light 4 ft capacity suitable for single T8 LED tube rod 4ft 20 watt complete with LED tube rod T8, 20 W, 4ft long with extruded aluminium body, PC diffuser and inbuilt driver, holder, prewired fitted on two Nos 2nd class hard wood round block and connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of tube light fitting including taking down old unserviceable fitting any type complete all as specified and as directed by Engr-in-charge. Make of T/L fitting - Century LED Ltd Cat Part No. - KCCF02000863 / Philips Cat Part No. - TMC 501 P 1xT-LED 22W P3241 / Wipro Cat Part No. - WIO921208 Make of LED T/L Rod - Century LED Ltd Cat Part No. - TWPP020C / Philips Cat Part No. - MAS LEDtube 1200mm 18W865 T8 I / Wipro Cat Part No. - LL13-181-65SE

Supply and fix LED light fitting (cealing) recessed/ surface mounted 600mm x 600mm 36 watt LED provided with high transmission crylic cover polycarbonate diffuser modular to be fitted on POP/ Gypsum cealing lampwhite powder coated CRCA housing luminare including necessary electric connection with three core twisted flexible copper cable of suitable size from ceiling rose to connector of of light fitting complete including taking down unsv light fitting all as specified and directed by Engr-in-charge. Make : Century LED Ltd Cat Part No. PCVP036C or equivalent in Wipro/ Philips

Supply and fixing LED batten mirror light 10/12 Watt extruded aluminium body, PC diffuser and inbuilt driver, prewired with electronic driver and diffuser and all accessories fitted on including two Nos 2nd class hard wood round block to be fitted on wall / ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size including taking down the old light fitting any type complete all as specified and as directed. Make : Century LED Ltd Cat Part No. BWMP010C2136 or equivalent in Wipro/ Philips

Supply and fix LED flood light 60/70 Watt die cast aluminium housing with IP-65 protection and surface mounting device type LED 60/70 Watt with lens including all fixing arrangement required to fixed on pole/ wall / surface with suitable size of fixing items such as clamps, nut bolts and washer of suitable size connecting with existing electric supply with three run of 1.5 sqmm single core copper conductor cable with flexible PVC conduit including taking down old any type of light fitting complete all as specified and directed. Make - Century LED Ltd Cat part No. - FWZP060C / Bajaj cat part No. - BVP 120 LED 70 CW FG S1 PSU GR / Wipro cat part No. - LF19-711-060-57-XX

Supply and fix LED flood light 100/110 Watt die cast aluminium housing with IP-65 protection and surface mounting device type LED 100/110 Watt with lens including all fixing arrangement required to fixed on pole/ wall / surface with suitable size of fixing items such as clamps, nut bolts and washer of suitable size connecting with existing electric supply with three run of 1.5 sqmm single core copper conductor cable with flexible PVC conduit including taking down old any type of light fitting complete all as specified and directed. Make - Century LED Ltd Cat part No. - FWQU100C / Philips cat part No. - BVP 192 LED 110 CW HO NB FG GR PSU / Wipro Cat part No. - LF20-122-060-57-XX

Matetial and labour for sub-main wiring in repairs with two run of FRLS PVC insulated unshethed single core multi-stranded copper conductor of size 6 sqmm and one run of 4 sqmm copper conductor as continuity earth wire drawn in and including PVC conduit of suitable size but not less than 20mm dia on shed/ wall / iron channel etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring of any size in steel/ PVC rigid conduit complete all as specified and directed (Note : (i) Two run of 6 sqmm cable one run of 4 sqmm cable alongwith PVC conduit shall be measured and paid as one unit. (ii) Cost of cutting of wall/ fixing material such as GI wire of suitable size / any item, if any, required for housing of PVC casing conduit etc and also making good the disturbed surfaces are deemed to be included in unit rate. (iii) Cost of chase cutting if any for submain wiring shall be deemed to be included in the quoted rate).

Matetial and labour for sub-main wiring in repairs with two run of FRLS PVC insulated unshethed single core multi-stranded copper conductor of size 4 sqmm and one run of 2.5 sqmm copper conductor as continuity earth wire drawn in and including PVC conduit of suitable size but not less than 25 mm dia on shed/ wall / iron channel etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring of any size in steel/ PVC rigid conduit complete all as specified and directed (Note : (i) Two run of 2.5 sqmm cable one run of 1.5 sqmm cable alongwith PVC conduit shall be measured and paid as one unit. (ii) Cost of cutting of wall/ fixing material such as GI wire of suitable size / any item, if any, required for housing of PVC casing conduit etc and also making good the disturbed surfaces are deemed to be included in unit rate. (iii) Cost of chase cutting if any for submain wiring shall be deemed to be included in the quoted rate).

Supply and fixing TPN DB 4 way double door horizontal type suitable for four pole MCB TPN as incomer including make good of damaged surface/wall including re-connection with existing earth wire to DB incuding taking out the old unserviceable one complete all as specified and as directed.Note:- MCB shall be measured and paid seperatly.

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 8 way, including taking down the old unserviceable DB complete all as specified as directed.

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 4 way, including taking down the old unserviceable DB complete all as specified as directed.

Supply and fix MCB TPN 63 amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed.

Supply and fix MCB single pole & neutral 40 Amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed.

Supply and fix MCB single pole & neutral 32 amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed.

Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed.

Supply and fix Blanking plate for MCB DB complete all as specified as directed

Materials and labour for earthing complete with galvanized earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron earth lead wire 4.0 mm dia length upto 7.5 mtr by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (light grade) not exc 7.5 mtr, alternate layers of charcoal and salt, including 20 mm bore GI tubing for watering to earth electrode, earth lead connected to test point/ distribution panel /feeder pillar etc as directed including necessary earth work, concrete pit with PCC (1:3:6) type C1, pre cast RCC(1:1:5:3) type A1 cover slab duly reinforced with 8 mm dia TMT bar 150mm c/c both way and two numbers lifting handle made of TMT bar and set in cement mortar (1:4), funnel, wire mesh, all as shown in electrical plate No 3 of SSR part-1 and testing on completion including taking out old earthing complete all as specified and directed.

S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire including taking out old wire complete all as specified and directed.

S&F GI pipe 15 mm bore 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking out old pipe complete all as specified and directed.

Supply and fix sheet steel enclosure fitted with plug & socket metal clad AC box with MCB SP 20A including insulated neutral link, adjustable DIN rail channel and connecting links complete after taking down the old socket board and connection complete all as specified as directed.

Hanging only wall mounted fan any type or size and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engr-in-charge.

Hanging only exaust fan any type or size and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engr-in-charge.

SENCO

SHRI MILAN CHANDRA DAS

RUNJEN CONSTRUCTION

RBS Builders

M/S MAHENDRALALL DUTTA

The Planters Engineering Corporation

BHARUKA ENTERPRISES

ELECTRO COMMERCIAL CO