Drain

Earth Work excavation for road boundary drains as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification 305 MOR / 304 MORTH. For C/o CC Drain - Mechanical

Earth Work excavation for road boundary drains as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification 305 MOR / 304 MORTH. For C/o CC Drain - Manual

Supply and Filling of HBG stone chips 2.36 mm and below in foundation trenches including cost & conveyance of all materials, labour charges, seigniorage charges etc., complete.

Plain Cement concrete nominal mix (1:4:8) prop (Cement : fine aggregate: coarse aggregate ) using 40mm size Hard Granite Machine Crushed Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work.for foundation and under flooring bed. for C/o CC Drain

Plain cement concrete M15 using 20mm 10mm dia graded metal including cost and convence of all the material and labor charges etc.,complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH. for C/o CC Drain

Plain cement concrete M15 using 20mm 10mm dia graded metal including cost and convence of all the material and labor charges etc.,complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH. for C/o CC Drain

P.C.C (1:2:4) using 20 mm m/c metal and OPC, coarse and fine aggregate with concrete mixture. All work upto plinth level including cost & conveyance of all materials, labour charges, machine mixing, cetering, laying in position, curing etc. complete. (Benching)

RBR-FNDN-4 E: Providing R.C.C. grade M 25 (Design Mix) concrete using 20 mm Graded Metal (MORD) for structures using 20 mm nominal size Graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH for Culvert slabs.

Providing High Yield Deformed (HYSD) steel bars (Fe 500/500D/550D From Primary Producers like TATA,SAIL,VSP,JSW Steel grade asper IS 1786 - 1985) OF 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20 SWG cost and conveyance of bars from approved sources to site of work, including cost and conveyance binding wire for finished item of work.

BLD-CSTN-2-9 modification.; Filling with excated earth by manual means in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)