Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.1 LAccepted-Finance | L1 | Accepted-Finance Being lowest | |
| 2 | L2₹27.2 L+₹3.1 L (13.0%)Rejected-Finance 02 NERLE NERLE YEWALEWADI ROAD NERLE SANGLI MAHARASHTRA 415406 | SANGLI | MAHARASHTRA | 415406 | L2 | Rejected-Finance not being lowest | |
| 3 | L3₹29.9 L+₹5.9 L (24.4%)Rejected-Finance SADASHIV PHUGE NAGAR OPP SANDVIK FACTORY RADHIKA RESIDENCY F WING FLAT NO 7 PHUGEWADI PUNE 411 012 | PUNE | MAHARASHTRA | 411012 | L3 | Rejected-Finance not being lowest | |
| 4 | L4₹30.0 L+₹5.9 L (24.5%)Rejected-Finance | L4 | Rejected-Finance not being lowest | |
| 5 | L5₹41.0 L+₹17.0 L (70.6%)Rejected-Finance | L5 | Rejected-Finance not being lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
6 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (CME) Khadki
Garrison Engineer (CME) Khadki, Phugewadi, Dapodi, Kendriya vidyalay Gate , beside Unlimited (Mega Mart) Mall, Pune - 411 012
Repair and maint of various types of fans and its connected items and replacement of existing fan rods with anti suicide fan rod at MD accn, OTM and certain other areas and repair/ replacement and maint of various types of security, road, garden
2023_MES_593549_2
8415/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Garrison Engineer (CME) Khadki
Class D, category b(i)
9 documents required · 9 mandatory
₹500
Yes
Garrison Engineer (CME) Khadki
₹90,000
Yes
14 Jun 2023
23 May 2023
13 Jun 2023
23 May 2023
6 Jun 2023
24 May 2023
Amount
Taking down folloiwing fans of any type and size from site and removing to MES store for servicing like cleaning, lubricating, greasing and replacement of split pin, bearing, bush, capacitor, connection wire and refixing the fans at same location after spray painting to complete fan including blade by applying one coat of synthetic enamel paint and testing complete all as specified and directed by Engr-in-Charge. Note :- (a) Contractor will provide one electrician and one helper for removing the faulty fan and refixing the serviced ceiling fan (b) Contractor team will report to AGE E/M Sub Div daily except sunday and holiday at 0900 Hrs to collect ceiling fan complaints. (c) Contractor will give one year guarantee for repairable fan except burnt out fans) (d) Rate quoted by the contractor shall be deemed to be inclusive of spare parts as required.
Ceiling fans of any size
Exhaust fans of any size (metal body)
Exhaust fans of any size (PVC body)
Wall mounting/air circulator fan of any size and type
M & L for replacement of burnt out coil of following fans and rewinding complete with super enamelled copper wire of same guage and weight including replacement of bearing, bush, capacitor, insulation paper and varnishing including spray painting to complete fan including blade by applying one coat of synthetic enamel paint and testing complete including taking down, removal to workshop and refixing upto satisfaction of Engr-in-Charge. Note :- 1. Rewinding work shall be carried out at AGE E/M store yard or any place decided by Engineer-in-Charge. 2. Contractor is responsible to give one year guarantee for rewinding fans)
Ceiling fan 1200/1400 mm sweep working on 230 volts AC supply
Exhaust fan upto 400 mm sweep working on 230 volts AC supply (metal body)
Exhaust fans upto 300mm sweep working on 230 volts AC supply (PVC body)
Wall mounting/air circulator fan of any sweep working on 230 volts AC supply
S & F in repair fan hanging hook any type or size suitable to hang on wooden block, MS bar etc with rubber reel, nuts, bolts, split pin etc suitable for ceiling fan complete all as specified and as directed by Engr-in-Charge.
S & F in replacement down rod made out of GI pipe medium grade 15mm dia with fan clamps incl drilling, cutting threading & white painting etc for ceiling fans 1200/1400mm sweep all as specified and directed by Engr-in-Charge.
S & F in repairs canopy for ceiling fans upper and bottom (Set of two) complete all as specified and directed.
Supply and fixing in replacement by cutting sizes water proof plywood ISI Marked, 12mm thick, of required size incl necessary provisions for mounting in walls, openings and securing using fasteners 10 cms long and 8 mm dia for mounting of exhaust fans in various locations and sizes as directed.
Taking down old unserviceable PVC ventilation/exhaust fan after disconnecting the wire from ceiling rose and deposited to store yard of AGE E/M and supply and fix ventilation/exhaust fan made out of plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm complete all as specified and directed.
Taking down old unserviceable PVC ventilation/exhaust fan after disconnecting the wire from ceiling rose and deposited to store yard of AGE E/M and supply and fix ventilation/exhaust fan made out of plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200 to 250 mm complete all as specified and directed. Note:- Size of fan shall be decided by the Engineer-in-Charge.
Taking down old unserviceable ceiling fans after disconnecting the wire from ceiling rose and deposited to store yard of AGE E/M and supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE 5 star rated with brushless direct current motor (BLDC) complete all as specified and directed.
S & F in replacement stepped type ,socket design electronic fan regulator flush type on the existing phenolic laminated sheet etc.suitable for 1200 mm sweep ceiling fan all as specified and directed incl taking down old UNSV one..
S&F in replacement louver shutter of exhaust fan upto 400 mm size round or square as per site condition including fixing arrangement with fixing material complete all as specifed and directed.
Supply and fix in replacement terminal connector 3 way complete all as specified and directed.
Supply and fix in replacement capacitor 2.5 mfd 230 volts complete all as specified and directed.
Supply and fix in replacement capacitor 4 mfd 230 volts complete all as specified and directed.
S&F MS screw for fixing of ceiling fan blade of any size and type complete all as specified and directed.
S&F in replacement of fan blade suitable for 1200mm dia ceiling fan complete all as specified and directed. Note : Blade shall be suitable for Bajaj/ Crompton/ Usha/ Havells/ Polar make fans.
S&F in replacement of fan blade suitable for 1400mm dia ceiling fan complete all as specified and directed. Note : Blade shall be suitable for Bajaj/ Crompton/ Usha/ Havells/ Polar make fans.
S&F in replacement of fan blade suitable for upto 300 mm dia PVC exhaust fan complete all as specified and directed. Note : Blade shall be suitable for Bajaj/ Crompton/ Usha/ Havells/ Polar make fans.
S&F in replacement of PVC fan blade suitable for wall mounted fan upto 600mm dia complete all as specified and directed. Note : Blade shall be suitable for Bajaj/ Crompton/ Usha/ Havells/ Polar make fans.
S&F in replacement of wall mounted fan blade guard of size upto 600 mm dia complete all as specified and directed. Note : Blade shall be suitable for Bajaj/ Crompton/ Usha/ Havells/ Polar make fans.
Taking down and refixing ceiling fan after replacement of fan rod with anti suicide fan rod (12") white, MS pipe zinc plated, 19mm OD, 1.8+/-0.05mm thick, spring set grade 3 carbon steel material zinc plated, MSME tested for performance test and opening at impact load of 22 Kgf and above and spring hidden in the pipe will expand to about 1 mtr or more complete all as specified and directed. Make Safe soluion industries or eqlnt
All as per item No.21 above, but of size (18") complete all as specified and directed.
All as per item No.21 above, but of size (24") complete all as specified and directed.
All as per item No.21 above, but of size (30") complete all as specified and directed.
All as per item No.21 above, but of size (36") complete all as specified and directed.
All as per item No.21 above, but of size (48") complete all as specified and directed.
All as per item No.21 above, but of size (60") complete all as specified and directed.
Supply and fix PCB controller suitable for 240 V single phase supply for BLDC fan with PVC cover and all fixing arrangement complete all as specified and directed.
Excavation in trenches n. exc. 1.5m wide and n exc. 1.5m in depth for taking out/laying cables in soft/loose soil all as directed.
Excavation in trenches n. exc. 1.5m wide and n exc. 1.5m in depth for pole foundation/laying cables in Hard/dense soil all as directed.
Excavation in trenches exceeding 1.5m wide and n exc. 3 m in depth for pole foundation/laying cables in Hard/dense soil all as directed.
M & L for bituminous road cutting to a width of 45 cm and depth 60 cm for laying UG cables and making good with cement concrete 1:3:6 type C 1 (using 20 mm graded stone aggregate)
Returning filling in, including, spreading, leveling, watering and well ramming in layers not exc. 25 cm all as directed..
Removing surplus excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point all as directed.
Supply, laying and testing cable XLPE insulated screened pvc bedded galvanised steel strip or wire armoured , electric power cables ( heavy duty) with stranded aluminium conductor 1100 volts grade cross sectional area 4 core 16 Sqmm in and including taking out old one all as specified and directed.
All as per item No.35 above, but of the size 4 core 25 Sqmm
All as per item No.35 above, but of the size 2 core 10 Sqmm
Supply & Laying of Telerex DWC (Double Wall corrugated) HDPE pipe ISI marked of outer dia of 50 mm and inner dia 38 mm polythylene with smoooth inernal and profiled external surface for non pressue under ground cable incl couplers & bends complete all as specified. Make : REX POLYEXTRUSION LTD or its equivalent as approved
S & fix LT Cable joining kit heat shrinkabale complete with jointing materials suitable for LT Armoured cable 4 core of size 25 to 50 Sqmm all as directed. Make : Denson/3M/Raychem
Cutting of tree branches of any girth along OH lines & street light pole at a distance not less than 2 meter on either side of the pole cleaning of bushes and shrubes of any type along entire RM of pole. Cleaning /prunning should be carried out as and when required during entire running period of contract or as when directed.
M&L for taking down and refixing of lights after decarbonizing of contact between street light/flood lights (installed on pole, high mast tower or bldg wall) and conductor/junction box bus bar by removing the wire of light fittings and cleaning the condutor/bus bar gently and reconnecting the wire at any height manually or with the help of hydraulic street light/high mast repair vehicle upto 16 mtr height including replacement of damaged wire connection from kiosk and concutor box to LED fitting/high mast fittings etc. Note :- Hydraulic ladder alongwith vehicle will be borne by Contractor and same will be included in quoting rate.
S&F in repalcement LED street light fittings of 45 watt system wattage and high preesure die cast aluminium housing with sealed toughened glass cover, IP 66 protection, cool white 6500 K, 240 Volts AC, 50 Hz, operating voltage range 160 V-270 V built in surge protection incl making proper connection complete including cutting , welding , drilling holes, nut bolts, washer complete all as directed by Engineer-in-charge. Note :- Necessary T&P required for removing and fixing of light shall be borne by the contractor and same will be included in quoting rate.
All as per item No.42 above, but capacity 60 Watt complete including cutting , welding, drilling holes, nut bolts, washer complete all as directed by Engineer-in-charge.
All as per item No.42 above, but capacity 90 Watt complete including cutting, welding, drilling holes, nut bolts, washer complete all as directed by Engineer-in-charge.
All as per item No.42 above, but capacity 120 Watt complete including cutting, welding, drilling holes, nut bolts, washer complete all as directed by Engineer-in-charge.
S&F in replacement new LED flood light fittings of 100 watt high preesure die cast aluminium housing with sealed toughened glass cover, IP 66 protection,cool white 6500 K, 240 Volts AC, 50 Hz, working temperature range -20ºC to 60ºC, built in surge protection incl making proper connection complete including cutting, welding, drilling holes, nut bolts, washer complete all as directed by Engineer-in-charge. Note :- Necessary T&P required for removing and fixing of light shall be borne by the contractor and same will be included in quoting rate.
All as per item No.46 above, but capacity 60 Watt complete including cutting, welding, drilling holes, nut bolts, washer complete all as directed by Engineer-in-charge. Note :- Necessary T&P required for removing and fixing of light shall be borne by the contractor and same will be included in quoted rate.
All as per item No.46 above, but capacity 200 Watt complete including cutting, welding, drilling holes, nut bolts, washer complete all as directed by Engineer-in-charge.
Supply and fixing or passing through pipe, 1100 volts grade heavy duty, PVC insulated round 3 core 2.5 sqmm copper cable including electrical connection complete all as specified and directed by Engr-in-Charge.
S&F in replacement street light bracket made out of GI pipe medium grade 32 mm bore approx length not less than 120 cm bent to shape including new clamps made of MS flat of size 40x5 mm thick including cutting, welding, drilling holes, nut, bolts washers etc including two coats of aluminium paint over one coat of red oxide primer on MS work complete all as specified and directed.
M&L in replacement fabrication of Kiosk box made out of fibre material complete with TPN, aluminium bus and suitable for one number MCB (SP) including one No MCB (SP) 6 Amps 240 volts with glands for incoming & out going cable including fixing of flat iron clamps of size on PCC/Steel tubular pole complete all as specified and as directed by Engr-in-Charge.
M&L in replacement fabrication of Kiosk box made out of fibre material complete with SPN, aluminium bus and suitable for one number MCB (SP) including one No MCB (SP) 6 Amps 240 volts with glands for incoming & out going cable including fixing of flat iron clamps of size on PCC/Steel tubular pole complete all as specified and as directed by Engr-in-Charge.
Material and labour for replacement of old broken ACSR with aluminium conductor steel reinforced streching without kinks / bends and binding with insulators on street poles complete all as specified and directed by Engineer-in-Charge.
Material & labour for replacement of old cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed inclusive of one primer coat, one under and one finishing coat of aluminium paint all as specified including taking down the old one
M&L for replacement of GI Pipe Light grade with all connected accessories of sizes 40 mm complete as directed.Note:- Clamps nut bolts saddle etc will be paid & measured seperately.
M&L for steel swaged poles complete with cast iron base plate, finial taperplug, bolts, nuts and screws as specified type 410 SP-31 and including painting with two coats of synthetic enamel aluminum paint over a coat of primer including preparation of new surfaces complete all as specified and directed.
M&L for providing plain cement concrete type D-2 , 1:4:8 (using 40mm graded stone aggregate) in foundation filling and mass concrete all as directed.
M&L for providing plain cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in coping, finished even and fair, including necessary from work all as directed at site.
Material & Labour for surface cleaning of steel tubular poles upto 11 Mtr height including removing rusted particles and painting with one coats of synthetic enamel aluminium paint including cross arms, bracing, supports, clamps, eye hooks, security light bracket, clamp etc incl painting on coping with cement base white paint complete all as directed. Note: (i) The quoted rate shall includes marking of numbers on each pole as per direction of Engr-in-Charge. (ii) The quoted rates shall including the reapiring of coping with cement / PCC.
Material & Labour for cement based paint for PCC pole upto 11 mtr height including painting with one coats of synthetic enamel aluminium paint incl cross arms, bracing, supports, clamps, eye hooks, security light bracket, clamp etc incl painting on coping with cement base white paint complete all as directed. Note: (i) The quoted rate shall includes marking of numbers on each LT pole as per direction of Engr-in-Charge. (ii) The quoted rates shall including the reapiring of coping with cement / PCC.
Material & Labour for replacement of old UNSV MCCB of any type/capacity with new MCCB FP 32 Amps 415 AC, 50 Hz, 25kA thermal magnetic release adjustable type complete all as directed.
Material & Labour for replacement of old UNSV MCCB of any type/capacity with new MCCB FP 63 Amps 415 AC, 50 Hz, 25kA thermal magnetic release adjustable type complete all as directed.
Supply and fixing in replacement three pole Contactor 63 A Current Rating 70A General use 10A, 415V with coil three pole contactor complete all as specified and directed.
Supply and fixing in replacement MNX 50 to 80 spare coil for three pole Contactor complete all as specified and directed.
Supply and fixing in replacement Digital timer switch with inbuilt backup current capacity 16 Amps operated on 415 volts AC 50Hz complete all as specified and directed.
Taking down old unsv timer switches and S & F of Automatic street light control with infrared sensor based NATRURE SWITCH and VOLTAGE MONITORING SYSTEM (VMS) Three phase load of 8 KW for automation of street lights. Nature Switch operation should be based on Natural light Lux level. Required illuminance level for switching ON is < 30 Lux and for switching OFF > 10 Lux. The sensor should also have part night operation facility of min. 4 hrs. to max. 12 hrs. VMS should have adjustable over & under Voltage trip level and protection against phase loss, Beutral loss & Phase reverse incl Power contactors (3 nos of capacity 25 amps per phase each) and incoming (3 nos of capacity 32 amps each)- outgoing MCB(3 nos of capacity 32 amps each) & main load circuit wiring (Copper) of minimum 10 sqmm. The sensor , VSM, Power contactor, MCBs incl connected items should be enclosed in a Pole/wall mountable enclosure made of rust proof, electric shock proof,termite proof and FR grade SMC junction box conforming to IP54. The circuit should also have provision for manual operation (i.e. sensor & VMS By-Pass option). Model Swadeep- 02EC8kW3P-VMS or equivqlent in Schneider/Havells/Legrand
All as per item No.66 above, but for single phase load of 5 KW for automation of street lights complete all as specified and directed.
M & L for Preparation of old painted surfaces of LT Panel or Street light Panel covered by dust and other deposited materials by cleaning from Panel of Size upto 100 X 100 X 50 cm including Repair of panel door, hinged nut .bolits clamp etc .painting with one coat of aluminium paint complete all as specified.
Supply and fix in repair LED highbay optica light of 120 watt powder coated PDC aluminium housing and adustable bracket complete all as specified and directed.
M&L for hiring of vehicle mounted telescopic ladder (working hight upto 20 mtr) for remoivng and fixing of lights on swan necked poles/hight mast light poles/bldgs and cutting of trees which are not approachable with bamboo ladder complete all as specified and directed.
RELIABLE ENTERPRISES
M/S kirpan Enterprises
Pritam Electro Mechanical Services
Priyanka Power line
TULAJA ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .