Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.8 LAccepted-AOC NEAR LIC OFFICE KALAIGNAR ARIVALAYAM SHOP ROOM NO7 GROUND FLOOR OF BACK SIDE PHOENIX BAY SRI VIJAYA PURAM 744101 | SRI VIJAYA PURAM | SOUTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744101 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹43.3 L+₹2.5 L (6.01%)Rejected-Finance | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹44.0 L+₹3.2 L (7.86%)Rejected-Finance 956 2 CHANDERSEKER ENTERPRISE OPP MARICAR HOSPITAL OLD CCS JUNGLIGHAT SOUTH ANDAMAN ANDAMAN NICOBAR 744103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹44.1 L+₹3.3 L (8.09%)Rejected-Finance NEAR OLD CCS JUNGLIGHAT SRI VIJAYA PURAM 744 103 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L4 | Rejected-Finance Not Lowest Bidder | |
| 5 | L5₹45.7 L+₹4.9 L (11.9%)Rejected-Finance 1 TROPICAL REFRIGERATION PHONIX BAY PORT BLAIR PORT BLAIR ANDAMAN NICOBAR 744101 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744101 | L5 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹25.6 L
EMD Value
₹51,500
Closing Date
28 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BRICHGUNJ
GE BRICHGUNJ, PORT BLAIR
PROVISION OF 250 KVA VOLTAGE STABLIZER (STABLIZED SUPPLY) CABLE AND OTHER MINOR WORK AT LAMBALINE UNDER GE BRICHGUNJ
2024_MES_645692_1
8445A
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE BRICHGUNJ
As per NIT
9 documents required · 9 mandatory
₹500
GE Brichgunj
₹51,500
Yes
22 May 2024
8 Mar 2024
29 Mar 2024
8 Mar 2024
28 Mar 2024
23 Mar 2024
Amount
Supply and fix Servo motor operated line voltage correctors (SVC) Voltage stabilizer indoor/outdoor for automatic operation, three phase, naturally oil cooled, outdoor type & designed for input voltage between 250 V to 480 V with output voltage stabilized at 415 with accuracy ± 1% and speed of correction 8 Volts per second and of capacity 250 KVA suitable for both balanced and unbalaned load with by pass arrangements, with high voltage cut off and short circuit protection complete including necessary foundation work as directed or as per manufactures recommendations.
Supply, lay, test, connecting and commissioning in repairs 240 Sq mm 3.5 core under ground cable LT 1100 volts grade heavy duty, XLPE, insulated PVC sheathed, armoured with aluminium stranded conductor laid in trenches/fixed to poles/drawn through pipes with suitable size cable glands, crimping type cable lugs,sockets etc. complete all as specified and as directed.
All as per item No. 2 above but cable of size 150 sqmm 3.5 core complete all as specified and directed.
Supply and lay HDPE double wall corrugated pipes confirming to IS-14930 Part II for cable protection of size 110mm OD and 95mm ID including all acessories such as bend, end caps and couplers etc, complete all as specified and as directed.
M&L for earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the earth plate not less than 1.5M below normal GL, earthing connected to galvanised strip 32 x 6mm by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 15 mm dia light grade GI protection pipe, funnel with wire mesh,watering pipe of size 20 mm dia med. grade, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 3 of SSR Pt-I, 2009 specification.
M&L for Cutting Bittumen Road Hard top at site as required for Laying of Pipe line and making good of disturbed surface as per existing top with 20/40mm graded stone aggregate and bitumen layer etc after repair work complete all as specified and as directed.
S&F in replacement of GI tubing light grade, 100mm bore ISI marked laid in floor / trenches etc as protection of LT Cable complete all as specified and as directed.
Supply, installation, testing & commissioning CPRI approved outdoor cubical type LT feeder pillar box suitable for 415V, 3 phase , 4 wire 50 Hz, AC supply system fabricated outer shell from MS sheet 3.15 mm thick and MS angle of size 50 mm x50 mm x6 mm frame front and back openable single door system lockable /openable by keys from both sides having lock system totally enclsoed dust, weather & vermin proof having and inner shell 2mm thick made of MS sheet compartmentlised for each control gear front openable single door system lockable/openable by keys having louvers and air vent gaskets for natural flow of Air. 'U' type gasket shall be used to make the inner shell completely vermin proof and to accomodate incommer/outgoing MCCBs and Aluminum busbars of rating 2 times that of controlling MCCB. TPN busbar and extension link shall be insulated with color coded heat shrinkable sleeve and shall be mounted on suitable size SMC insulator at suitable inteval throghout the length of TPN busbar. supported on SMC insulator, bottom base channel of MS section not less than 100mm x50mm x5mm thick, entire panel shall have a common aluminium earth bar of size 25mm x 5mm at the rear with 2 Nos earth stud, solid connections from main bus bar to switchgears with required size of copper bus bars. All control wiring with minimum 1.5 sqmm PVC insulated multistranded copper conductor cable, cable alleys, cable gland, plates in two half and general construction confirming to IS:8623/93. Computer cut self adhesive vinyl danger notice plate having conventional symbol of bone & skull be provided on the busbar chamber and front of outer shell and The degree of protection of outer shell shall be IP-54 and mounted on suitable PCC foundation. A detechable pre drilled gland plate of thickness 3mm should be used at bottom shell. Provision of threaded earthing stud at bottom & lifting lugs of suitable size at top to lift the feeder pillat box safely shall be made. Indicating lamps LED type, 230volts, AC at the incomer of the unit to show three phase availability at the outgoing of incomer including tamper proof digital meter to measure voltage, current with CT & PT (Make- Secure/L&T/HPL/Schneider). An inspection lamp with 5 watt LED bulb shall be fitted on top side of inner shell. The degree of protection for inner shell shall be IP-42 & including carry the following controls :- Note: Contractor shall be submit panel drawing before placing order and approved from GE.
Use and waste of form work to sides and sofit of Beams for Fair finished surfaces complete all as specified and directed.
M & L for RCC- M -30 Design Mix as in beams, cantilevers,bressummers, lintels over 1.5m span complete all as specified and directed.
M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L Mild steel TMT bars 5mm dia and over up to and including 10mm dia cut to length bent to shape required and binding with mild steel wire annealed not less than 0.9 mm dia.as in stirrups, spacers, binders and the like complete all as specified and directed.
M&L Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and directed.
M&L Rendering 10mm thick on concrete surfaces in CM (1:6) finished even & smooth without using extra cement complete all as specified and directed.
M&L 15mm thick rendering in two layers of 10mm thick backing coat in CM 1:6 and 5mm thick floating coat in CM 1:4 mixed with water proofing compound on all external wall surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note : Water proofing compound shall be measured and paid seperately)
Supply only integral WPC (3% by wt of cement).
M&L preparation of newly plastered surfaces of wall and applying two coats of Oil Bound distemper over a coat of primer over a coat of internal wall care putty complete all as specified and directed.
All as per item No. 17 above but on Ceiling surfaces
M&L preparation of old plastered surfaces of ceiling and applying two coats of Oil Bound distemper over a complete all as specified and directed.
M& L for Finishing walls with Acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and as directed. (Make Apex Ultima)
M&L Hard Core of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surface complete all as specified and directed.
M&L 100mm thk Cement concrete type B-1, 1:2:4 (20mm graded aggregate)as in flooring complete all as specified and directed.
M&L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate in 100mm thick as in sub base complete all as specified and directed.
M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate in 40mm thick as in sub base complete all as specified and directed.
M&L for Glass dividing strips, 3 mm thick and 38mm width inserted in position, conform to design complete all as specified and directed.
M&L second class Hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.
S & F Aluminium anodised (minimum anodisation is 50 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections Hinges, handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).
Supply only 4.0mm thick sheet glass, ordinary quality in squares n exc 0.50 sq.m in each pane complete all as specified and directed.
Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.
S&F 35mm thk Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 100 Butt hinges extruded aluminium alloy, anodised. With galvanished mild steel hinge pin , anodised and fixed type B-21 complete all as specified and directed.
S&F Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips to sheet cast or extruded sections and fixing bolt or cast aluminium alloy complete all as specified and directed.
S&F Stainless steel IMAX hinges for aluminium window shutters complete all as specified and directed.
S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and directed.
S&F Aluminium anodised barrel tower bolt of extruded section of size 100mm long complete all as specified and directed.
S&F 100 mm long extruded aluminium alloy anodised handles fabricated type complete all as specified and directed.
S&F 150mm long extruded aluminium alloy anodised handles fabricated type complete all as specified and directed.
M&L Preparing new wooden surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all specified and directed.
S & F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.
S & F framed work such as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, ladders etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; and grade of Fe-410- W(Gde- E-250) quality- B also fastening and fixing complete all as specified and directed.
Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and directed.
Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified .
Taking down Aluminium Frame Work / Chowkats, Partiation Wall complete all as specified and directed.
M & L for coloured vitrified tiles as approved 10 mm thick (square/rectangular) polished, area of each tiles exc. 0.46 sqm,n. exc 1.00 Sqm in floors etc. set and jointed in neat cement slurry and pointed with coloured or white cement to match including screed bed 15mm thick 1:4, complete all as specified and as directed.
All as per item no 45 here in before, but on vertical surfaces including 10mm thick CM 1:3 as in backing coat of dado/Skirting
Material and labour for false ceiling with aluminum grid work (Size of grid 600x600 mm) with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle and suspended with 6mm dia GI wire or Steel rod approx height of 2 to 3 mtr height hooked to roof with needful adjustment bolts at an interval of 1.20 m centre to centre staggered and board with Eco board decorative type size 600 x 600 x 4 mm thick finished with two coats of oil bound distemper over a coat of primer on exposed surfaces all as specified and directed.
Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions.
Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions.
Supply & fix 6.3mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.
Complete removal of existing treatment and preparing old surfaces for applying two coat of oil bound distemper on one coat of primer over a coat of primer and pytty on walls complete all as specified and as directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/ loose soil complete all as specified and as directed.
Excavation in trenches n. exc. 1.5 m wide and not exceeding 1.5 m in depth, for foundation, etc or for shafts, walls, cesspits, manholes, pier holes, etc getting out in soft/loose soil, complete all as specified and as directed.
PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundation ,filling and mass concrete complete all as specified and as directed.
Reinforcement cement concerete M-25 (desing mix) grade using 20 mm graded stone aggregate as in foundations, including rafts, footings foundation beams, plinthbeams ,bases for columns etc basement slabs and mass concrete complete all as specified and as directed.
Material and Labour for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly roundedor chamfered angles and throating, as directed including necessary formwork complete all as specified and as directed.
Use and waste formwork to, sides and soffits of Lintel beams for rough finished flat surfaces complete all as specified and as directed.
Material and Labour for Flush pointing in C;M 1:4 on brick walls all as specified and as directed.
M & L chequered cement concrete tiles 25cmx 25cm x 25mm with grey cement and pigment set, jointed and pointed in neat cement slurry and pointed in white/colour cement to match the shade of the tiles over and including 15mm thick cement screed bed in CM 1:6 complete all as specified and directed.
S &F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework ofwater tanks and similar work con- forming to Fe.290.Gde-E-165
M&L Preparing new steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all specified and directed.
Supply and fix in replacement of GI tubing medium grade, 80mm bore ISI marked laid in floor / trenches etc fixing with all GI fittings as required at site including taking out of old pipe complete all as specified and as directed by Engineer-in-Charge
S& F in replacement steel water tubes medium grade (ISI marked) galvanised with all fittings and fixed to walls or laid on floor or in ceilings of size 40 mm bore pipe including taking out of old pipelines complete all as specified and as directed by Engr-in-Charge.
All as per item No 63.00 here in before but of size 50 mm bore pipe complete all as specified and as directed.
Supply, fix, install and testing of Submersible Pump set suitable for 415 volts, 3 phase, 56 M Head, 5 LPS including suitable automatic star delta starter complete all as specified and directed.
Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth in hard and dense soil and getting out for laying of pipelines /cables all as specified and dire
Returing, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils all as specified.
Removing the surplus soil not exceeding 50 M and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 Mtr above the starting point.
M&L for Cutting the existing water main 80mm dia and including all materials as required and excavation, earth work complete.
S&F in replacement Gun metal gate valve with iron wheel head screwed both ends for pipe of size 40 mm all as specified and as directed by Engr-in-Charge. Make : Zoloto, LEADER or eqvt.
All as per Item Sl Item No 70 here-in-before but of size 50 mm.
All as per Item Sl Item No 70 here-in-before but of size 80 mm.
M&L for Cutting Bittumen Road Hard top at site as required for Laying of Pipe line and making good of disturbed surface as per existing top with 20mm graded stone aggregate and bitumen layer etc after repair work complete all as specified and as directed.
Dismantling wrought iron (or) mild steel work of any description not other wise provided for.
Demolition of PCC in ground floor or paving n.exc 15 cm thick above or below ground level
S&F Informatory reflective direction and place identification sign board with double post stainless steel pipe frame on 3mm to 5mm thick thick stainless steel, aluminium, ACP sheets size of board 900mmx1200mm with high intensity prismatic tap with single side writing complete and specified as per manufacturers instructions. Make- India mart (Note- Colour and pattern as per approved by GE)
S&F Fully Retro reflective cautionary sign board in triangular shape with single post stainless steel pipe frame on 2mm thick aluminium sheet size of board 900mm with 600x200mm definition plate having one coat zinl chromate stoving prime and two coats of stoving enamel grey and bothsides, having front side entire surface finally bonded with retro reflective sheeting of Engineer grade ,having pressure sensitive adhesive,boarder and message(lengh,letters,numerals etc.) cutout or screen printed complete and specified as per manufacturers instructions.Make- India mart (Note- Colour and pattern as per approved by GE)
S&F Stainless steel post of 60mm dia and 16 gauze duly polished for best shine fitted with round globe on top as in sign board frame complete and specified as per manufacturers instructions.
M/s Kamal Electrical
CHANDER SEKER ENTERPRISE
SKV Engineering
Tropical Refrigeration
M/s K Moorthi
M/s Ramesh Lal
excellent Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .