SPL REPAIR TO PUF SHELTER NO 880, 881 AND 889 (JCOS/OR SINGLE LIVING) AND PUF SHELTER NO 884 AND 890 (TOILET BLOCK) AT PMS

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises complete all as specified and directed.

Demolition of cement concrete as in ground floors and pavings not exceeding 15 cm thick below or above ground level (unreinforced) complete all as specified and directed.

M&L TMT mild steel bars 6-8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9 mm `dia or securing with clips quality conforming to complete all as specified.

M&L for 75mm cement concrete (nominal mix) 1:2:4 type B1 using 20 mm graded aggregates as in floors, pavings complete all as specified and directed.

M&L Non Skid white ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.36sqm but not exceeding 0.54 sqm in floors etc. set and jointed in neat cement slurry and pointed in white cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in CM 1:6 complete all as specified and directed.

M&L for 75 mm thick cement concrete M10 (Nominal Mix) with 40mm graded crushed aggregate finished even and fair laid to a slope of 1 in 12, laid in alternate bays, each bay not exceeding 3 m length with joint filled with bituminous mastic filling comprising a mixture of 1 part of heated Industrial bitumen 85/25 grade and two parts of heated sand as in plinth protection complete all as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

S&F Roof trusses (framed) of angle iron members trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 , the grill shall be inserted in the wall surface including necessary drilling and grouting with cement etc

M&L for compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc.