REPAIR/RE-CARPETING OF INTERNAL ROAD AND REPAIR/MAINT OF ROAD FURNITURE ITEMS IN THE AREA UNDER AGE E/M (HOSP) UNDER GE (E/M) LUCKNOW

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n.exc 400 sqm and depth exc 50 mm and n.exc 100 mm deep and removal of retrieved material from site to a distance n exc 50 m complete all as specified and directed.

M&L for 75 mm thick (compacted thickness) WBM with coarse aggregate of grading 2 (63 mm to 40 mm size) or of grading 3 (50 mm to 20 mm size) spread, rolled and consolidated to required gradient and camber with granite, trap or basalt stone complete all as specified and directed.

All as per item No 2 here-in- before but except materials.

M&L for preparing un-surfaced WBM surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-30 @ 10.00 kg per 10 sq metre complete all as specified and directed.

M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with @ 4% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver, rolled and compacted with 8 to 12 tonne power roller complete all as directed and directed.

M&L for preparing black top surface by brushing with wire brushes for removing caked mud etc. using mechanical compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-30 @ 5.00 kg per 10 sq metre complete all as specified and directed.

M&L for 30 mm thick (consolidated thickness) Bituminous premix semi dense asphaltic concrete with 5.50% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver rolled and compacted to required camber and gradient complete all as directed and directed.

M&L for repair to pot holes of depth n.exc 30 cm and n exc 1 sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 25 mm in depth making good by filling in screened and graded road metal, watering and well ramming (including supply of Road metal) and applying tack coat @ 5.00 kg per 10 sq metre putting in premix as specified for thin bituminous carpet (2 cm thick) complete all as specified and directed.

M&L for providing and laying 2.50 mm thick hot applied thermo plastic paint on road, pavement and like exc 10 cm wide in uniform thickness with glass beads as per clause No 803 of MORTH specification including cleaning of roads surface, heating the material within specified temperature limits for marking with all necessary arrangements required complete all as specified and directed.

S&F in repair "Cat Eyes " of size width not more than 130 mm and height not more than 20 mm made out of strong engineering high impact resistant polymer with electronic weeded lenses for retro reflective in dry and wet weather conditions along road complete all as specified and directed (Make: Avery /Dennison)

S&F in repairs of solar studs CAT eye of size width not less than 130 mm and height not exceeding 20 mm made of strong engineering polymer thermoplastic body with electronic weeded lenses for retro reflective in dry and wet weather condition and fixed with bitumen of suitable grade complete all as specifide and directed.

Supply and fixing delinator made out of M.S pipe having 50 mm outer dia with iron jali, and 750 mm length and to be embedded in PCC 1:3:6 Type C2(using 40mm graded stone aggregate) and MS pipe having powder coated iron jali & mesh and three coloured reflective tape strips of size 40 mm complete all as specified and directed. Note: Necessary excavation for embedding of M S delinator shall be deemed to be included in the rate quoted against this item.

S&F for delinator reflective type embeded in PCC 1:2:4 of required size as directed (Note PCC will not be paid and measured separately and rate will be included in this item only).

S & F Retro Reflective signage board made out of 2 mm thick aluminuim sheet face to be fully covered with high intensity prismetic (HIP) Retro Refletive sheeting conforming to ASTMD-4956 01 as per colour required, letters and symbols shall be made of same Retro Reflective sheeting shall be duly processed on base aluminum substrate board to be supplied alongwith back supported angle iron frame minimum 35x35x5mm and duly painted with two coats of synthetic enamel paint over one coat of red oxide primer alongwith fixing accessories complete as per MORTH & H specification in repairs complete all as specified and directed.

S & F speed bumps made of heavy duty tough rubber of size 350 mm x 250 mm x 53 mm and weight 1.2 kg approx, colour black and yellow, as per manufacture instruction complete all as specified and directed Make: Dark Eye/Avery/Dennison.

BHARAT ASSOCIATES PVT LTD