SPECIAL REPAIRS TO MAIN DRAIN IN FRONT OF EAST GATE AT MPF AMBARNATH

Amount

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed.

Demolition of reinforced cement concrete above ground floor exceeding 15cm thickness (reinforcement cut as required to facilitate demolition) complete all as specified & directed. NOTE Credit shall be accounted for old steel reinforcement.

Excavating over areas, n exceeding 1.5 m deep and getting out in hard/dense soil complete all as specified & directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and n exceeding 1.5 m in depth and getting out in hard/dense soil complete all as specified & directed.

Returning, filling in (soils), including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified & directed.

Removing excavated material (soils) not exceeding. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified & directed.

Material & Labour for providing plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete all as specified and directed

Material and labour for providing reinforced cement concrete (Design Mix) M 30 grade (using 20mm graded stone aggregates) as in Foundations, including rafts,footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed. NOTE Reinforcement and formwork shall be measured and paid separately.

Material and labour for providing reinforced cement concrete (Design Mix) M 30 grade (using 20mm graded stone aggregates) as in Walls, retaining walls,basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses all as specified and directed. NOTE Reinforcement and formwork shall be measured and paid separately.

Material and labour for providing reinforced cement concrete (Design Mix) M 30 grade (using 20mm graded stone aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed. NOTE Reinforcement and formwork shall be measured and paid separately.

Material and labour for providing Hardcore (using broken stone or boulders) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

Material & Labour for providing plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregates) as in surface channels and drains all as specified and directed

Material & Labour for providing plain cement concrete 1:1/2:3 type A1 (using 20mm graded stone aggregates) as in surface channels and drains all as specified and directed

Material and labour for use and waste of steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat fair finished surfaces of concrete all as specified and directed.

Material and labour for use and waste of steel formwork to faces of walls, retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter flat fair finished surfaces of concrete all as specified and directed.

Material and labour for use and waste of steel formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;exceeding 200mm thick (Horizontal or sloping) flat fair finished surfaces of concrete all as specified and directed.

Material & Labour for providing Mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Material & Labour for rendering 15 mm thick in cement mortar (1:4) on brick work or concrete masonry wall surface finished even and smooth without using extra cement all as specified and directed.

Material & Labour for providing precast cement concrete solid block masonry exceeding 10 cm in width and setting in cement mortar (1:6) design mix type C5, complete all as specified and directed.

Material & Labour for providing plain cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregates)in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, and use and waste of steel formwork complete all as specified and directed

Material & Labour for preparation of new untreated surfaces of walls including cornices pillaster etc and applying two coats of cement based paint all as specified and directed.

Vandan Enterprises

Hindustan Construction Company