Internal Electrification of CHSS Extension (First Floor) at DAE Nodal Centre, Pallavaram, Chennai.

Amount

Supply, Installation, Testing and Commissioning of following 415V Power Distribution Panel as per the SLD and detailed specification. (Refer Section V)

Power Distribution panel- CHSS Extension (First Floor). Dwg. No. IGC/ES/DNFC/EL-032 (sheet 07 of 07)

Supply, Installation, Testing, and Commissioning of 63A, TP+N, Switch Disconnector with Fuses Units (SDFU), housed in IP 55 rated fabricated enclosure boxes, as per the detailed specifications.(Refer Section V)

Loading, Transportation, Unloading at site, installation, Testing and Commissioning of 1100 Volts Grade PVC/HRPVC/XLPE insulated, Stranded Aluminium/copper conductor cables of following sizes in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification (Note: Cable will be issued free of cost by the department. Transportation of cables from GSO stores/IGCAR central stores, Kalpakkam to Pallavaram site is in the scope of the contractor).(Refer Sec VI, Clause No.3)

3/3.5/4core X Upto 25 sqmm

3/3.5/4Core X above 25 & up to 120 sqmm

3/3.5/4Core X above 120 & up to 240 sqmm

Loading, Transportation, Unloading at site, installation, Testing and Commissioning of one number of armoured PIJF Telephone cable of following sizes in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification.(Note: Cable will be issued free of cost by the department. Transportation of cables from GSO stores/IGCAR central stores, Kalpakkam to Pallavaram site is in the scope of the contractor). (Refer Sec VI, Clause No.3)

Upto 20 Pair

End Termination of the following sizes of Aluminium Conductor PVC Insulated and sheathed armoured UG Cable using Single Compression, Heavy Duty, Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Comet or equivalent make Aluminium crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for fixing cable gland. (Refer Sec VI, Clause No.10.1).

4 Core X 10 Sqmm

4 Core X 16 Sqmm

3.5/4 C x 35 sq.mm

3.5 x 185 sq.mm

3.5 x 240 sq.mm

Termination of the following sizes of PVC Sheathed, jelly filled, Flat/wire armoured PIJFUG Cable using Single Compression, Heavy Duty Gland connecting the cable to the equipment Telephone DBs etc. The rate shall include the cost of supply of Cable Gland. The Contractor shall arrange for drilling of holes wherever necessary for the completion of the work. (Refer Sec VI, Clause No.10.2).

Upto 20 Pair

Supply and Embedment of following sizes of flush mounting POWDER COATED TPN/SPN DB Enclosures with Double Door and per Phase isolation DBs consisting of Phase, Neutral and Earth Bus and interconnecting wires etc. at suitable depth in brick work as per the detailed specification and as directed by the Engineer-in-charge.(Refer Sec VI, Clause No.15.2).

SPN, 16 Way Distribution Board with all accessories Cat No:DESPN016DDS or equivalent make.

Supply and Embedment of following sizes Cable end termination box at suitable depth in brick work as per the detailed specification and as directed by the Engineer-in-charge.(Refer Sec VI, Clause No.15.2.2).

SPN,16 way Cable end box, Cat No:DBAPN016CB or equivalent suitable for SPN, 16 way Distribution Board Cat No:DESPN016DDS

Assembling, installation, testing and commissioning of MCB DB enclosure already embedded in the wall including supply of Engraved Circuit Identification Plate and Danger Board as per the detailed specification for the following size of MCB DBs. (Refer Sec VI, Clause No.15.3).

TPN, 12 Way Distribution Board

TPN, 10/8 Way Distribution Board

SPN, 12/16 Way or TPN 4/6 Way Distribution Board

Supply, Installation, testing and commissioning of the following MCB on Distribution Boards as per the detailed specification. (Refer Sec VI, Clause No.14.2).

40-63Amps, FP MCB (TYPE-C)

6-32 Amps SP MCB (Type-C)

6-32 Amps DP MCB (TYPE-C)

Supply, fixing testing and commissioning of the following RCCBs on Distribution Boards as per the detailed specification. (Refer Sec VI, Clause No.14.2).

RCCB FP Pole, 40 Amp, 300mA sensitivity Type AC

RCCB DP 25A 30mA, TYPE AC

RCCB DP 40A 30mA, TYPE AC

RCCB DP 63A 30mA, TYPE AC

Supply, installation, testing and commissioning of 4 pole, 125A, 415V, AC 23A Manual Bypass switches (Cat No: CK90813OOOO) housed in a factory made powder coated MS sheet steel enclosure, on MS frame work as per the scope of work. (MS item will be measured separately). (Refer Section V)

Supply and external installation of following sizes of Heavy Duty, Hot Dip Galvanised MS ERW Conduits for Electrical & Communication System with all the required accessories like round JBs, Solid Long Bends, Check Nuts, Nipples, Couplings, Reducers, Copper Clips, Copper Conductor, GI Wire etc. as per the detailed specification. .(Refer Sec VI, Clause No.27).

25mm dia 1.8mm wall thickness Heavy Duty, Hot Dip Galvanised/ ERW Conduits with 50mm deep junction boxes.

25mm GI Flexible Hose

Supply and external installation of following sizes of Heavy Duty, PVC circular rigid Conduits for Electrical & Communication System with required Solid Long Bends, Couplings, GI Wire etc, as per the detailed specification.(Refer Sec VI, Clause No.27).

40mm Dia, 2.6mm wall thickness PVC heavy duty round rigid conduits with 63mm deep Junction boxes

20mm Dia, 1.9mm wall thick PVC heavy duty conduit with 50mm deep Junction box

Supply and providing GI conduit downrod for installation of luminaries, fans etc as per the detailed specification.(Refer Sec VI, Clause No.16.5).

20mm dia GI conduit

CHSS Extension (First Floor) Wiring for lights / fans /sensors/ Timer /Power point with 1100V grade FRLS insulated copper conductor wires in existing concealed/ Exposed PVC / ERW / Flo-coated Metal conduits as per the detailed scope of work, including supply of Wires, switches/ sockets, termination of copper wires at either end by crimping including supply of PVC Sleeves/Ferrules, Copper Crimping Lugs and connecting the wires to various switches, sockets, etc. including testing and commissioning as per the detailed specification.(Refer Sec VI, Clause No.18 & Section V) Dwg. No. IGC/ES/DNFC/EL-032 (sheet 01 to 06)

Wiring for Light/Sensor/Fan Points with 2 Runs of 1.5 Sq.mm copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm copper wire for Earth from MCB Distribution Board to Primary light/sensor/fan point through Control Switch Box including 1 no. 6 Amps modular switch. Note: Earthing of modular control switch boxes with 2.5 sq.mm copper wire from pull box is also included in the scope of work.

Wiring for Light point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Switch box to Light point/Ceiling fan including 1 no. 6 A modular switch

Wiring for Light point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Switch box to switch box and further to Light point including 1 no. 6 A modular switch

Wiring for Light point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Light point to Light point /sensor/contactor

Wiring for fan point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Switch box to Fan point including 1 no. 6 A modular switch and 1 no. step type Fan regulator suitable for BLDC fan

Wiring and termination for Telephone point with 1 Run of 0.61 mm dia (Minimum), 250 V grade PVC insulated, twin twisted, two pair, tinned copper wire from Telephone Junction Box to Telephone points in concealed conduit/ PVC Trunking including supply of wire, 2 Nos. 1 module Jack type Telephone Socket with Shutter and 1 no. Two Modular plate.(Refer Sec VI, Clause No.18)

Wiring for Power point with 3 Runs of 2.5 Sq.mm Copper wires for Phase & Neutral and Earth from MCB Distribution Board to Power point through Control Switch Box including 16A modular switch, 6/16 Amps combined shuttered type Socket and 6A modular switch & 3 pin, 6A shuttered type Socket, Modular Plate.

Wiring for Power point with 3 Runs of 2.5 Sq.mm Copper wires for Phase & Neutral and Earth from Control Switch Box to control switch box including 6A modular switch & 3 pin 6A, shuttered type Socket and 16A modular switch & 6/16A combined shuttered type Socket, Modular plate

Wiring for Exhaust fan point up to 3Mtr height with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from MCB Distribution Board to Power point through Control Switch Box including supply of 3 pin 6A shuttered type Socket, 2Nos. 2 Modular plate and 1 No 6A modular switch. (Refer Section VI, Clause No 17.2)

Wiring for Exhaust fan point up to 3Mtr height with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Switch board to Power point including supply of 3 pin 6A shuttered type Socket, 2Nos. 2 Modular plate and 1 No 6A modular switch. (Refer Section VI, Clause No 17.2)

Wiring for Power Points with 2 Runs of 4.0 Sq.mm Copper wires for Phase, Neutral and 1 Run of 2.5 Sq.mm Copper wires for Earth from MCB Distribution Board to Single Phase Metal Clad Socket.

Wiring for AC Indoor unit Power point up to 3 Mtr height with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from MCB Distribution Board to Power point through Control Switch Box including supply of 1 no. 3 pin 6A shuttered type Socket, 1 no. Two pole 6 A modular mini MCB and 2 Nos. Two Modular plates.

Wiring for Power point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm copper wire for earth from Control Switch Box to control switch box including 1 no. 6A modular switch & 1 no. 3 pin 6A, shuttered type Socket and 1 no. Three Modular plate.

Wiring with 1 Run of 1.5 Sq.mm Copper wire

Wiring with 1 Run of 2.5 Sq.mm Copper wire

Wiring with 1 Run of 6 Sq.mm Copper wire

Wiring with 1 Run of 2 core x 1.5 Sq.mm Sheathed flexible Copper cable

Supply and fixing following Modular front cover plate on existing modular metal boxes etc. as required. (Refer Sec VI, Clause No.15.7).

One/Two module

3 Module

4 Module

6 Module

8 Module

1 Modular dummy plate

Supply, transportation, installation, testing and Commissioning of the following luminaires. (Refer Sec VI, Clause No.16.1).

Supply, transportation, installation, testing and Commissioning of the following type of Surface mounted luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No : WAND K 9W 5700K Code- SLWKB00957NDWEP0002C01-2 Feet Batten PRIME or equivalent and Lamp Type LED

Supply, transportation, installation, testing and Commissioning of the following type of Recess mounted luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No : Moon V2 STD 12W 5700K Item code DRM0S01257NDWEP or Equivalent and Lamp Type LED

Supply, transportation, installation, testing and Commissioning of the following type of Recess mounted luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No : FULLLIT SQ STD 30W 4000K Item code PRF0003040NDWEP or equivalent and Lamp Type LED

Supply, transportation, installation, testing and Commissioning of the following type of Recess mounted luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No : FULLLIT SQ STD 30W 5700K Item code PRF0003057NDWEP or equivalent and Lamp Type LED

Supply, transportation, installation, testing and Commissioning of the following type of Recess mounted luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No : Moon V2 STD 15W 5700K Item code DRM0S01557NDWEP or Equivalent and Lamp Type LED

Supply, transportation, installation, testing and Commissioning of the following type of Surface mounted luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No : Moon V2 STD 18W 5700K Item code SLMOSO1857NDWEP or Equivalent and Lamp Type LED

Supply, transportation, installation, testing and Commissioning of the following type of Surface mounted luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No : WAND K 30W 5700K code SLWKY03057NDWEP04C22 -SURFACE LIGHTS NONDIM WITH CUSTOMIZED CLAMP OF 30 DEG. TILT WHITE (PC) 4FEET- PRIME or equivalent and Lamp Type LED

Supply, transportation, installation, testing and Commissioning of the following type of BOX type luminaires using ball & socket. (Refer Sec VI, Clause No.16.1). - Catalogue No : BN308C LED40S-6500 L120 PSU WH S1 or equivalent and Lamp Type LED

Supply, transportation, installation, testing and Commissioning of the following types of Suspended luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No : CANE STD LINEAR PENDANT 30W, 5700K-4FT Item code LPC0103057NDWEP0DL4C01 with downrod replacement fixing accessories or Equivalent and Lamp Type LED

Supply, transportation, installation, testing and Commissioning of the following type of Recess mounted dimmable luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No : FULLLIT SQ STD PANEL LIGHTS RECESS 30W 4000K CCT ANALOG WHITE (PC) PRIME, Item code PRF0003040ADWEP or equivalent and Lamp Type LED

Supply, transportation, installation, testing and Commissioning of the following type of Wall (surface) mounted luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No : WT202W LED6S CW PSU S2 PC or equivalent and Lamp Type LED

Supply, transportation, installation, testing and Commissioning of Green LED Exit sign board with battery back up system, suitable for public spaces for safe emergency exit. (Refer Sec V).

Supply, transportation, installation, testing and Commissioning of the following type of suspended type decorative pendant luminaires with suspension kit. (Refer Sec VI, Clause No.16.1). - Catalogue No : CIRCLE DN 450 GEOMET 24W 4000K CCT NON DIM BLACK (PC) - PRIME, Item Code : AGC0D02440NDBKD000450C02 or equivalent and Lamp Type LED

Supply, transportation, installation, testing and Commissioning of the OSRAM DIM MCU G2 Rotary dimmer suitable for LED light fixture dimming application, complete with centre plate, knob and frame. (Refer Sec V). Product code. 4062172224642, Vn= 220-240 V AC, 50/60 Hz, Dali bus output = 100 mA max.

Supply, installation, testing and commissioning of following sizes of Wall Mounting Exhaust Fans including supply of Aluminium grill bracket with Stainless Steel Bolts for mounting of Exhaust Fan & Aluminium grill bracket and 3 Core, 2.5 Sq.mm PVC insulated & FRLS sheathed copper flexible cable of required length as per the detailed specification. (Refer Sec VI, Clause No.17.2).

230 mm dia Medium duty , Double ball bearing exhaust fan

300 mm Dia Turbo Heavy Duty Exhaust Fan

Supply, Installation, testing and commissioning of following sizes of BLDC ceiling Fans suitable for electronic regulator for speed adjustment and safety steel rope with 3 Core, 1.5 Sq.mm flexible copper cable including earth connection. Supply and fixing of regulator is not included in the scope of this item. (Refer Section V & Sec VI, Clause No.17.1).

1200mm Sweep BLDC ceiling fan

Supply, fabrication and installation of the following size of Hot dip Galvanised GI Flats in direct-in-ground including excavation and refilling as per the detailed specification. No cutting or drilling permitted after galvanisation.Refer Sec VI, Clause No.12.9).

50 X 6 mm GI flat

Supply, fabrication and installation of the following size of Hot dip Galvanised GI Flats in Built in trenches on walls, poles, RCC Concrete and through embedded pipes as per the detailed specification. No cutting or drilling permitted after galvanisation. (Refer Sec VI, Clause No.12.9).

50 X 6 mm GI flat

25 X 6 mm GI flat

Supply and installation of the following sizes of copper wires in built in trench as per the detailed specification.(Refer Sec VI, Clause No.12.8)

8SWG copper wire

Supply, cleaning the floor, proper pasting and installation of following insulating mat as per specification. (Refer Sec VI, Clause No.25).

2.0 mm thickness, Max useable voltage 3.3kV, AC Proof voltage 10kV for 3 minutes, AC dielectric strength 30kV RMS Insulating Mat confirming to IS:15652

Supply and Installation of MS Brackets, Supports, Frame work, Clamps, Base Channels, etc. fabricated out of angle / Channel / Rods etc. The rate quoted shall include the cost of fabrication / welding, cleaning and painting/ galvanising as follows including supply of required, fasteners, nuts, washers, etc.(Refer Sec VI, Clause No.11).

MS fabrication 1 coat primer & 2 coats synthetic enamel paint

Supply and Installation of laminated Hylam sheet of 3mm thickness over the boxes and as per the detailed specification.

Supply and Installation of following sizes of PVC trunking (casing & capping) on walls/Ceiling for routing of Power, Lighting and Telephone wires including all the required accessories like JBs, Coupling, External & Internal Bends, Elbows and end cap as per the detailed specification.(Refer Sec VI, Clause No.29)

25 X 12 mm size of PVC Mini trunking

Supply, transportation, installation, testing and commissioning of the following Sensors as directed by the Engineer-in-Charge. (Refer Sec VI, Clause No.16).

Recess mountable type Occupancy & day light PIR SWITCH CORRIDOR sensor suitable for lighting load coverage 2mtr wide and 12mtr length on both sides as directed by the Engineer-in-Charge. Sensor Model No. 488 17 or equivalent.

Dual tech Ceiling mounted sensor having both PIR and ultrasonic sensing elements, covering 90 sq.m area or equivalent. The unit Shall have provision to adjust ON time as well as day light level for switching ON. (Refer Sec VI, Clause No.16.3). Sensor Model No. 488 06 or equivalent.

Supply and open Installation of following Sizes of MS boxes as per the detailed specification. (Refer Sec VI, Clause No.15.10).

150(W)X150(H)X80(D)mm, 1.6mm thick sheet MS box

300(W)X300(H)X120(D)mm,1.8mm thick sheet MS Box

Supply and Installation of following sizes of Surface Mounting Plastic Boxes as per the detailed specification. (Refer Sec VI, Clause No.15.6).

Surface Mounting Plastic Boxes 4 Module

Supply and Installation of following Wiring Accessories as per the detailed specification (Refer Sec VI (MNC), Clause No.5).

1 No16A Switch on modular plate and termination of wires to the switches

1 No 6/16A 3 Pin combined shuttered type Socket on modular plate and termination of wires to the switches

1 No 6 A Two way switch on modular plate and termination of wires to switches

Supply, installation, testing and commissioning of following sizes of Wall Mounting Fans as per the detailed specification. (Refer Sec VI, Clause No.17.4).

400 mm sweep MAXX AIR TPW wall mounting fan

Supply and installation of 8 Ways Brass Neutral Link, 8 Screw Terminal Grounding Bar Block for wire looping and earthing with P.B.T insulator Base. (Refer Section-V)

Design, Manufacture, Assembly, Inspection, Packing, Supply and Delivery at site, Installation, Testing, Commissioning and Handing over of 1360Kgs/20 Passenger (for Hospital Purpose) MRL Lift complete as per Detailed Specification. (Refer Section-V Part-C)

RR ENTERPRISES (BID ID -3309072)

Bidder Name

RR ENTERPRISES

EC Enterprises