Repair of Kalammanagar Overhead Tank at Town Limit

Repair of Kalammanagar Overhead Tank at Town Limit

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped...

Providing plastering in CM 1:3 proportion after removing old plaster of existing RCC over head tanks, including smooth finishing, minimum 2% of approved quality water proofing compound, curing, scaffo...

Chipping unsound weak concrete material from slabs. Beams, columns & roofs upto 50mm by manual means or by standard power driven percussion type including cleaning reinforcement with wire brush comple...

Extra for chipping for every additional thickness of 25mm or part thereof bayond 50mm average depth

Cleaning of reinforcement from rust by Alkaline solution thoroughly as per direction of Engineer in charge of work. (SR 2021-22 - Vol-2,Page No. 185, Item No.20.120)

Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...

Providing and applying a SBR based bonding coat of 1.5 cement : 1 SBR by weight of approved equivalent constructions chemical to the existing dismantled/cleaned surface.

Providing and laying prebagged polymer modified cementitious mortar in stages over the treated surface with proper compaction and finish upto all heights including all materials labours and tool in la...

Earth work excavation for pipeline trenches in all kinds of by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, s...

Providing and laying in position Reinforced cement concrete of M25 Design Mix for raft, footings, beams below ground level in GLSR Foundation works. The granite/trap/basalt crushed graded coarse aggre...

Providing and laying in position Reinforced cement concrete M30 Design Mix for main and secondary beams below and above ground level. The granite/trap/basalt crushed graded coarse aggregates and fine ...

Micro-concrete work in columns including attached pilasters buttresses, plinth and string courses, fillets columns, pillars, piers.abutments,posts ans struts etc. up to floor five level excluding cost...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

Providing and injecting epoxy grout including structuring of crack in the body of slab girder by sand blasting, fixing inlet tube arrangement including cost of materials, machinery required for the wo...

Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kankar/Moorum. (Tipper 5.5 m3) PWD DSR 2021-22 Volume-III Page No.3 Item No. 1.1 A

Cost of Haulage Excluding Loading and Unloading. Taking output 10 t load and lead 10 km = 100 t.km PWD DSR 2021-22 Volume-III Page No 3 Item No. 1.4.A

Providing, applying & fixing non intrusive, impervious, non-destructive and wet wrapping type structural strengthening NCase GFF1200 fibre wrap system to columns. The work shall consist of applying pr...

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to RCC structures like floor and walls of reservoirs, sewe, effluent and water treatment plants,...

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments KUWS SR: P.NO53 I.No: 1783 (80 mm dia GM (Copper alloy) Gate valves)

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments KUWS SR: P.NO53 I.No: 1784 (100 mm dia GM (Copper alloy) Gate valves)

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments KUWS SR: P.NO53 I.No: 1786 (150 mm dia GM (Copper alloy) Gate valves)

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new R...

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...