SPECIAL REPAIRS TO JOINERY AND CUPBOARD AT BUILDING NO P-30 TO P-63 AT LITTLE BINAGA, B-2 P-1/1 AT LITTLE BINAGA, BUILDING NO P-01 TO P-32 AT KAMAT BAY AND BAITHKOL AT NAVAL BASE KARWAR.

Amount

Taking down chowkats or frames exc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) including making good disturbed portion to match the adjoing surfaces etc complete all as specified and as directed

-ditto- as per Item above but n.exc 1.5 sqm etc complete all as specified and as directed

Taking down only shutter of any description exc 1 sqm but n.exc 2 sqm each etc complete all as specified and as directed

-ditto- as per Item above but n.exc 1 sqm each etc complete all as specified and as directed

Dismantling boarding, of any size and any description, fixed in any position with screws etc complete all as specified and directed

S&F Second Class class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed etc complete all as specified and directed.

M & L for Cutting holes in brick walls or cement concrete walls exc one brick but not exc two bricks built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required etc complete all as specified and directed.

S&F Mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 etc complete all as specified and directed.

S&F 35mm thick second class hard wood, plain framed, paneled shutter of 9mm BWP comercial ply or 12mm veneered particle board with comercial veneering on both faces the size of rail land stile as per IS 1003 (Part-I) killn seasoned and chemically pressure treated etc complete all as specified and directed.

S&F 35mm thick second class hard wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, claus 8.24 (a); supplied and fitted to chowkats but divided into squares, with plain, chamfered or rounded, mitred and rebeted sash bars, any numbers etc complete all as specified and directed.

S & F 100 mm Butt hinges, stainless steel, with mild steel hinge pin, bright polished and fixed, type B-11 etc complete all as specified and directed.

S&F 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

S&F 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F for 140mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed

S & F 150mm extruded aluminium alloy handles, cast type as fixed complete all as specified and directed.

S & F 4 levers Mild steel Mortice lock, vertical type, of size 100 mm etc complete all as specified and directed.

S&F solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete all as specified.

S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with salvent cemet for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement suppling and fixing in the frame at site all as specified and directed.

S & F 75 mm Butt hinges, stainless steel, with mild steel hinge pin, bright polished and fixed, type B-11 etc complete all as specified and directed

S&F 150 mm long aluminium anodized barrel tower bolts of extruded sections as fixed complete all as specified and directed.

S & F 100mm extruded aluminium alloy handles, cast type as fixed complete all as specified and directed.

M&L powder coated Aluminium frame and shutter for doors, sliding windows & ventilators (moveable louvers type) and for prtitions with one or more rebates including joining cleat for fixing etc. Rubber gasketing all round the panels/ shutters to fix glass, PVC gasketing in all channels, locking arrangement, (minimum thickness of powder coating 50micron) complete all as specified.

S&F Anodised aluminium sections for window/ventilator shutters, sliding type without sash bars, aluminium sections weighing not less than 0.55kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, aluminium snap beading, screws etc compelte all as specified and directed.

S&F 4.0 mm thick Sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sq. m in each pane fixed to Aluminium windows/ventilator etc complete all as specified and directed.

S&F 4.0 mm thick Sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane fixed to Aluminium windows/ventilator etc complete all as specified and directed.

S&F 4.0 mm thick Sheet glass ground or obscured or frosted, on one side, ordinary quality and glazing with oil putty in square notexc 0.5 sq. m in each pane fixed to Aluminium windows/ventilator .

S&F in repair aluminum anodised GRILL (Deco grill DG 103 of 7.5 mm thick of M/s ELESAR FOCCHI Ltd.) fixed with suifable 'F' section No. 8584 15.30 x 23.40 x 1.40mm fabricated and rivetted to aluminum windows, complete all as specified and directed.

S&FStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

M&L for 18mm thick PVC Ply Board/Sheets both sides plain as in Cupboard Door, Partition, Draws & shelves including solvent cement & beadings etc as per manufacturers instructions complete all as specified and directed.

S&F Stainless steel telescopic channels 50 cm to 60cm long suitable for cupboard drwas etc complete as specified and directed

S & F 100mm D type stainless steel handles, fixed to cupboard draws etc complete all as specified and directed.

S & F 40mm width of flaps (when open) Continuous (piano) hinges, stainless steel, bright finish or electrogalvanised fixed to cupboard door etc complete all as specified and directed.

S&F 20mm dia stainless steel curtain rod or similar articles complete all as specified and as directed by Engineer in Charge

S&F stainless steel decorative type brackets suitable for 20mm dia curtain rod or similar articles complete all as specified and as directed by Engineer in Charge

S&Fmagnetic catches brass body and striking plate including letting complete all as specified and as directed by Engineer in Charge

S&F 20mm dia anodised aluminium alloy curtain rod or similar articles complete all as specified and as directed by Engineer in Charge

S&Fanodised aluminium alloy type brackets suitable for 20mm dia curtain rod or similar articles complete all as specified and as directed by Engineer in Charge

M & L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for applying one coat of Acrylic washable distemper on old decorated surfaces of wall including preparation of old surfaces etc complete all as specified and as directed by Engr-in-Charge.

M&L for coloured glazed ceramic tiles (Ist quality) of size 300 x 200 x 6 to 7 mm / 300 x 450 x 6 to 7 mm thick on vertical surfaces such as skirting, dado and rises to steps etc. including 10mm thick cement plaster in CM 1:3 set and set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete all as specified and directed.

KOTIAN -ECC

KVL CONSTRUCTION

SIRI SALES AND SERVICES

LEKSHMI ENGINEERS

K.G.SHANKER