Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹22.4 L
EMD Value
₹44,720
Closing Date
25 Jul 2020, 2:00 pmClosed
Executive engineer civil
SKIMS Soura
Sanitary and Plumbing works of Engineering Block at SKIMS.
2020_SKIMS_100479_1
SIMS/HEC/C/ET/03 of 2020-21 Dated 11-07-2020.
Open Tender
Civil Works
Item Rate
SKIMS Soura
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
Yes
Director Finance SKIMS Soura
₹44,720
Yes
19 Sept 2020
15 Jul 2020
29 Jul 2020
15 Jul 2020
25 Jul 2020
15 Jul 2020
Amount
Providing and fixing G.I pipes including G.I fittings and clamps including cutting and making good the walls.
15 mm Nominal bore
20mm nominal bore
25 mm nominal bore
Providing and fixing of CP Bib Cock long body of approved make (Jaquar / Parko)
Providing and fixing of CP Angle value long body of approved make (Jaquar / Parko)
Providing and fixing of CP Wall Mixer long body of approved make (Jaquar / Parko)
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :
providing and fixing of PVC Connection of approved make 24" length
Providing and fixing of Sink waste 100 mm of approved make
Providing and fixing of Flexible waste pipe 32 mm of approved make
Providing and fixing of CP Health Faucet of approved make (Jaquar/ Parko)
Providing and fixing of Mirror superior Quality of approved make
Providing and fixing of CP Soap case of approved make.
Providing and fixing of CP Grating of approve make.
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
(a) Brass Ball Value 15mm Heavy type
(b) Brass Ball Value 20mm Heavy type
© Brass Ball Value 25mm Heavy type
Providing and fixing of Following G.I fittings of approve make (NIKE)
(a) G.I Union 15mm (NIKE)
(b) G.I Union 20mm (NIKE)
© G.I Union 25mm (NIKE)
(d) Reducer 25x20 mm
(e) Reducer 20x15 mm
(f) Tee Reducer 25x15 mm
(g) Tee Reducer 20x15 mm
(h) Elbow 15mm
(i) Elbow 25mm
(J) Tee 15mm
(k) socket 15mm
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device(handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mmsizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
(a)One urinal basin with 5 litre white P.V.C. automatic flushing cistern.
Providing and fixing of CI pipes of approved make including jointing with lead caulked and all carriges upto site of work.
(a) 150mm dia
(b) 100 mm dia
Providing and fixing of CI fiitings of approved make including jointing with lead caulked and all carriages upto site of work. 100 mm dia
(a) Pain Bend
(b) Floor trap
© Collar
(d) door Tee 100mm
(e) Door junction 100x150mm
Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside)with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 finesand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :
(a)With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :
(a)White Vitreous China Wash basin size 630x450 mm
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
Providing and fixing of C.P Nipples of approved quality and manufacture.
Providing and fixing toilet paper holder CP brass of approved quality and manufature (Jaquar/parko/Hindware) :
Providing and fixing one piece white vitreous china pedestal type water closet (European type W.C. pan) with automatic seat and lid, 10 litre flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
Providing and fixing of Glass shelves of approved quality and manufacture.
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore
Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof.
Providing and fixing of brass ball cock of approved quality and manufacture 25mm dia
Providing and fixing of tanky nipples of approved quality and manufacture 25mm dia
TARIQ AHMAD DAR
SHOWKAT AHMAD ZULLA
M/S IRFAN RASHID DALKAW
MOHAMMAD RAFIQ SHEIKH
stage.html
html • 0.03 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .