WELCOME MAINTENANCE AND CERTAIN B/R MISC MAINTENANCE WORKS AT SITE KALINA, SANTACRUZ, AIRPORT AREA UNDER GE (AF) THANE

Amount

Demolition of reinforced cement concrete in any position and in any description not otherwise specifically provided for ,complete all as specified and as directed by Engr-in-charge.

M&L for Reinforced cement concrete (design mix) in M-30 (20mm graded stone aggregate) for chajjas or simillar wks ,complete all as specified and as directed by Engr-in-charge.

M&L for Reinforced cement concrete (design mix) in M-30 (20mm graded stone aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span ,complete all as specified and as directed by Engr-in-charge.

M & L for formwork with fair finished surface to side of soffits of floors, or roof beam, beam haunchings, girders, bressummers,lintels, cantilevers, shelves incl sup-posts, overhang etc, also splays bet floor and beams etc.,complete all as specified and as directed by Engr-in-charge.

M&L for Reinforced cement concrete (design mix) in M-30 (using 20mm graded stone aggregate) for Columns, pillars, piers,posts and struts ,complete all as specified and as directed by Engr-in-charge.

M&L for formwork to sides of pillars, posts, columns, piers and stanchions in square, rectangular fair finished surface of concrete ,complete all as specified and as directed by Engr-in-charge.

M&L for TMT bars 8 mm dia and over in reinforcement, cut to length, bent to shape required,including cranking and binding with mild steel wire (anneled) not less than 0.9 mm dia for stirrups ,complete all as specified and as directed by Engr-in-charge.

M&L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required,including cranking and binding with mild steel wire (anneled) not less than 0.9 mm dia ,complete all as specified and as directed by Engr-in-charge.

S&F for 2nd class hard wood (Sal) plain solid straight chawkats and frames brought, framed rebated on solid rounded or chamfered put together with glue pinned at jointed ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs Model No.- A1T-FD2 ,Make-A-1 teak product , 30 mm thick flush shutters,both side laminations , solid core construction, with Block board core and plywoood face panels, commercial type on both sides with one face is covered with decorative face veneer with lipping/frame to match,complete all as specified and as directed by Engr-in-charge.

S&F in repairs Model No- A1T-WM4 ,Make-A-1 teak product,30mm thick 2nd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or rounded fitted with cut,incl both side laminations,and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats ,complete all as specified and as directed by Engr-in-charge.

M&L for preparartion of new surfaces of wood exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer ,complete all as specified and as directed by Engr-in-charge. .

S & F in repairs JG Company Vanity Mirror Cabinet for Washbasin | Premium Wall Mounted Storage Cabinet Bathroom with Door | Multipurpose Bathroom Cabinet Rack with Mirror (White) size 54D x 35W x 12H Centimeters, Wall Mount , Plastic etc complete all as specified and as directed by Engr-In-Charge.

Taking down shutters without taking off shutters from frames exc 1.4 sqm but n exc 4 sqm each ,complete all as specified and as directed by Engr-in-charge.

Resecuring without taking down chowkhats or frams exc 1.50 sqm but n exc 4 sqm each ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs powder coated aluminium frames incl sliding tracks, etc for doors, windows, ventilators, partitions with one or more rebates including jointing cleats for fixing, fittings like hinges, handles and locks, etc all as specified and directed by Engineer – in- charge.

S&F Rubber gasket for aluminium frame for windows, Ventilators etc complete all as specified and as directed.

S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.14 mm fixed with stainless steel wire staple all as specified and as directed.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden lepping in square not exc 0.50 Sqm each in each pane all as specified and as directed.

S&F 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame work all as specified and as directed by Engr-in-Charge.

S & F 5mm thick figured glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame work all as specified and as directed by Engr-in-Charge.

S&F in repairs door closer aluminium (*extruded section) body hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs floor door stopper of aluminium alloy body 150 mm length, and tounge, anodised, with hard drawn steel spring , fixed in floor ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs Mortice lock with two levers (vertical type), brass body 100 mm length of latch and fixed ,complete all as specified and as directed by Engr-in-charge.

M&L in repairs for Plywood 12mm thick grade BWR type BB fixed with screws to timber frame ,aluminium frame etc,complete all as specified and as directed by Engr-in-charge.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm ,complete all as specified and as directed by Engr-in-charge.

Supply only for decorative Laminate type 1 of any thickness of surface finish, colour and pattern as approved, fixed with approved adhesive on plywood as per manufacturer instruction and as directed by Engr-in-Charge.

S&F in repairs brass mortice lock, vertical type, size 100 mm , 4 levers with 2 keys ,complete all as specified and as directed by Engr-in-charge.

Magnetic catches for cupboard doors No.2 ,complete all as specified and as directed by Engr-in-charge.

Extra over rates for external teak wood lipping 6 mm thick fixed with nails ,complete all as specified and as directed by Engr-in-charge.

M & L in repairs (wooden ) fillet work using 2nd class hard wood exc 6 & n. exc 13 sq.cm fixed with screw, plane fillet square, rectangle in section clean swan, secuared with nails or brads ,complete all as specified and as directed by Engr-in-charge.

M&L in repairs stainless steel 'L' shape soft closing spring hinges for cabinets shutters complete all as specified and directed by Engr-in-Charge.

M&L in repairs GI push and pull channel brand of size 20"(51 CM) length for modular cabibets ,complete all as specified and directed by Engr-in-Charge

S & F in repairs Rim latch (125 mm size of latch) with two levers of brass body stone enamelled finish , with brass knob or lever handle and fixed.

S & F, in repair, aluminium anodised barrel towel bolts of extruded section of length 150 mm ,complete all as specified and as directed by Engr-in-charge.

S & F 300 mm Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections including taking down old sliding door bolt all as specified and as directed.

S & F stainless steel butt hinges medium weight SS of size 100 mm by welding to existing frame including taking down old hinges all as specified and as directed.

S & F in repair 300 mm size mild steel ordinary rat tail, rod pattern springs including roller and roller plate ,complete all as specified and as directed by Engr-in-charge.

S & F in repair aluminium extruded alloy handles fabricated type anodised of size 150 mm ,complete all as specified and as directed by Engr-in-charge.

S & F in repair, hasp and staple safety type of size 100 mm of aluminium anodized ,complete all as specified and as directed by Engr-in-charge.

Re-securing or easing and adjusting without taking down shutters of any description and size ,complete all as specified and as directed by Engr-in-charge.

M & L for fixing 6 mm thick plywood fixed with screw incl necessary cutting and waste ,complete all as specified and as directed by Engr-in-charge.

S & F 20 mm dia aluminium anodised tubular curtains rod with powder coated including taking down old curtain rod all as specified and as directed.

S & F in repairs aluminium anodised brackets powder coated to match with rod for curtain rod of 20mm dia ,complete all as specified and as directed by Engr-in-charge.

Hacking out old broken glass of any thickness, size, quality or description from metal /wooden frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones etc ,complete all as specified and as directed by Engr-in-charge.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden lepping in square not exc 0.50 Sqm each in each pane all as specified and as directed.

All as per Srl item No 46.00 here-in-before but with 3 mm thick figured glass.

S & F 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame work all as specified and as directed by Engr-in-Charge.

M & L for welding in repairs to roof truss,rafters , purlins,steel gates/ windows / doors exc 2.5 cm but not exc 5.00 cm in length and thickness of metal to be welded exc 9 mm but n exc 20 mm [height of roof truss,rafter / purlins 12m to 15 m] ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs 40 mm dia cupboard knobs fixed with nut, screw and washer of mild steel bright finished ,complete all as specified and as directed by Engr-in-charge.

Cleaning of PVC tank of capacity exc 250 Ltrs and up to and including 500 Ltrs by flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with concentrated hydrochloric acid or caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 Metre and depositing ,complete all as specified and as directed by Engr-in-charge.

All as per Srl item No 53.00 here-in-above but capacity of tank exc 500 Ltrs and up to and including 1000 Ltrs.

All as per Srl item No 53.00 here-in-above but capacity of tank exc 1000 Ltrs and up to and including 2000 Ltrs.

Fixing only float valve upto 25mm bore obtained from dismantling ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs 15 mm size bib tap cast copper alloy, chromioum plated fancy type screwed down, with capston head, screwed for iron pipe complete all as specified and as directed.

S & F in repairs 15 mm size pillar taps, cast copper alloy chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs 15 mm size pillar taps swan neck , cast copper alloy chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs 15 mm size brass chromium plated single hole basin mixer for mixing hot & cold water screwed down for iron pipe ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs 15 mm size stop valve or angle valve cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs 15 mm size stop valve with long shank (consealed type) cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union all as specified and as directed.

S & F 20 mm size gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

Material & Labour for replacement of brass spindle with nylone washer to existing 15 mm size chromium plated bib taps, Pillar taps, stop cock or angle valve of any type ,complete all as specified and as directed by Engr-in-charge.

Material & Labour for repair of unserviceable existing bib taps, Pillar taps, stop cock or angle valve of any type & size incl replacement of nylon washer , teflon tape etc all as specified and as directed.

S&F 15 mm size stop valve of PTMT any colour high pressure screwed for iron pipe, weight not less than 90 gms, including taking down old stop valve all as specified and as directed.

S & F 20 mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including taking down old ball valve complete all as specified and as directed [Minimum weight for 20 mm – 210 gms] .

S & F grating doom 150 x 150 mm of brass chromium plated, including taking down old grating doom ,complete all as specified and as directed by Engr-in-charge.

S & F PVC connection 15 mm size with PTMT nuts on both end, length 450 mm, including taking down old PVC connection ,complete all as specified and as directed by Engr-in-charge.

S & F PVC connection 15 mm size with PTMT nuts on both end, length 600 mm, including taking down old PVC connection ,complete all as specified and as directed by Engr-in-charge.

S&F 15 mm size brass chromium plated shower rose 125 mm dia with or without / swivel joints, fixed in position including taking down old shower rose ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs 10 Ltr capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float and handle, fixed in position and connecting including taking down old cistern ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs syphonic set for vitreous china low level flushing cistern of any capacity,complete all as specified and as directed by Engr-in-charge.

S&F in repairs the internal fitting kit complete suitable for 10 to 15 ltr PVC low level flushing cistern ,complete all as specified and as directed by Engr-in-charge.

S&F vitreous china white wash hand basin 550 mm x 450 mm including all necessary fitting such as 15 mm CP pillar cock fancy type, CP waste coupling 32mm dia, PVC waste pipe and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces, including taking down old wash hand basin complete all as specified and as directed.

S&F plastic water closet seat cover, white or black colour closed pattern with flat bottom including taking down old seat cover complete all as specified and as directed.

S&F polyethylene water tank cover with hinges suitable up to 2000 Ltrs tanks, including taking down old water tank cover ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs 15 mm size brass chromium plated zig zag type connector (coupling) for connecting wall mixer and GI tubing ,complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 15 mm size wall mixer, for mixing hot & cold water, cast copper alloy, chromium plated with capstan head comprising bib tap with all connected accessories, fixed ,complete all as specified and as directed by Engr-in-charge.

Material and labour in repairs 15 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete fixed to walls / ceiling or laid to floors including taking up or down old tubing and connected fitting, fixture complete.

Taking up or down 20 mm bore steel water tubing including connected fitting, fixture, and disconnection of fitting fixture etc. from tubing,complete all as specified and as directed by Engr-in-charge.

Re-fixing of old serviceable 20 mm bore galvanized iron tubing medium grade retrived relevent item of Sch A , after cleaning of tube and including all fittings and fixtures fixed to walls / ceiling or laid to floors ,complete all as specified and as directed by Engr-in-charge.

Material and labour for 20 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete fixed to walls / ceiling or laid to floors ,complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 32 mm size waste pipe, length 1.20m for wash hand basin / urinal / sink ,complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 40 mm size waste pipe length 1.20m for wash hand basin / urinal / sink ,complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 32 mm size waste coupling of PTMT for wash hand basin / urinal / sink ,complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 40 mm size waste coupling of PTMT for wash hand basin / urinal / sink ,complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs Hand shower (Health Faucet) brass chromium plated with 8 mm Dia & 1 meter long flexible tube and wall hook,complete all as specified and as directed by Engr-in-charge.

S&F in repairs 6 mm thick corner glass self with aluminum / SS railing incl brackets for fixing ( size 300 mm x 300 mm )etc ,complete all as specified and as directed by Engr-in-charge.

S & f in repairs 6 mm thick rectangular glass self with aluminum / SS railing incl brackets for fixing ( size 450mm x 150 mm )etc,complete all as specified and as directed by Engr-in-charge.

S & F in repairs Teflon tape adhesive sealant length 10 m , width 1.5 cm ,complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 15 mm size wash hand basin mixer, for mixing hot & cold water, cast copper alloy, chromium plated with capstan head comprising single hole bib tap with all connected accessories, fixed ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs Vitreous china EWC wall mounted (white) incl taking down old water closet and refixing with seat cover,low level flushing cistern incl flushing kit, brackets for fixing ,making good existing surface etc ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs S&F Stainless steel plate rack , 0.5mm to 1mm thick having size (900 x 760 x 230 mm ) including fixing on wall with brackets etc ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia pipe ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs PVC 160 mm bore Rain water drainage pipes , waste, soil ,(SWR) PVC SWR pipes single socketed in any length with ubber ring joints fixed to wall ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs PVC 110 mm bore Rainwater drainage pipes , waste, soil ,(SWR) PVC SWR pipes single socketed in any length with ubber ring joints fixed to wall.

S & F in repairs PVC (SWR) bends 160 mm bore any radius ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs PVC (SWR) bends 110mm bore any radius ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs PVC 110mm bore (SWR) coupler ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs 15 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs 20 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs tubular towel rail, aluminium anodised 20mm dia D type 60 CM long between flanges ,complete all as specified and as directed by Engr-in-charge.

M&L for preparing old plastered surface of wall including washing, rubbing down and stopping of distempered and painted surfaces, apply two coats of oil bound distemper over wall care putty ,complete all as specified and as directed by Engr-in-charge. Note : Wall care putty shall be measured and paid seperately

M&L for 2mm thick wall care putty on wall ,complete all as specified and as directed by Engr-in-charge.

M & L for preparation of old decorated surfaces of walls and applying one coat of cement base paint ,complete all as specified and as directed by Engr-in-charge.

M&L for complete removal on existing treatment surfaces of wall chajjas etc in any position washing down with water and treating the surface from all loose dirt chalk grease fungi algali flakes etc filling up all cracks and defects with CM 1:3 and applying two coats of external weather coat emulsion paint of approved make and shade incl a coat of weather coat primer all as per manufacturer's instr and directions including 18m height steel double scaffolding for highrise buildings etc ,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of existing treatment on surfaces of wall, chajjas etc in any position washing down with water and cleaning the surface from all loose dirt chalk grease fungi algal flakes etc and applying two coats of damp proof paint Make Asian : Smartcare White Damp Proof, CAT No. 1048 all as per manufacturers instructions and directed including scaffolding upto 10m height ,complete all as specified and as directed by Engr-in-charge.

M & L for preparation of old decorated surfaces of ceiling etc and applying one coat of washable Oil bound distemper ,complete all as specified and as directed by Engr-in-charge.

M & L complete removal on existing treatment surfaces of wall preparation and applying two coat of plastic emulsion paint incl primer all as per manufacturers instructions ,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of old decorated steel surfaces and applying one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of old decorated wooden surfaces and applying one coat of synthetic enamel paint all as specified and directed.

Taking down cement plaster of any description in patch work including racking out joints, hacking for key and disposing of debris out side MD land including 10m height steel scaffolding ,complete all as specified and as directed by Engr-in-charge.

M & L for 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonary wall, finished even and smooth without using extra cement ,complete all as specified and as directed by Engr-in-charge.

M&L for applying two coats of oil bound distemper over a coat of primer on previously untreated surfaces of wall including preparation ,complete all as specified and as directed by Engr-in-charge.

M&L for 15 mm thick cement plaster on stone or concrete surfaces in CM 1:4 mixed with water proofing compound @ 3% by weight of cement including 10m height steel scaffolding ,complete all as specified and as directed by Engr-in-charge. [Note:- WPC shall be measured and paid separately ]

Supply of integral water proofing compound ,complete all as specified and as directed by Engr-in-charge.

M&L for preparing new plaster surfaces of walls applying one coat of weather coat primer and two coats of weather proof acrylic emultion paint all as per manufacturers instructions and directed including 18m height steel scaffolding complete all as specified by GE/Engineer-in-Charge Make : Asian Paint Apex, Berger weather coat or equivalent

M & L for self adhesive Bitumen tape for sealing the metal surfaces ,joints,repair cracks in metal , rain metal side gutters , surface concrete or bitumen roof tiles metal elements, of make NICOBAND or equivalent in Hukimoyo butyl tape waterproof for sheets leakage proof sealant for pipes. (each tape should have 5cm in width & 5m in length.Each).colour of tape shall be match with existing roof sheet white /blue /red incl necessary safety measures , tools and plants, ladder for applying upto height of bldg, hangar roof tops, rain gutters etc max 21m height from floor etc completed and as directed.Note: work will carried out at diifrent locations in patchwork as directed .

S & F 10 mm thick toughened glass for doors, partition, area exceed 1.50 Sqm in each pane including fixed with standard Adhesive ,complete all as specified and as directed by Engr-in-charge.

M & L for glass brick 80 mm thick, size 200 mm X 200 mm X 80 mm , glossy finish, square shape with any pattern or design , transperant or colour for Partition wall, dividers, construct glass wall fixed with Std Adhesive all as specified and as directed by Engr-In-Charge.

S & F Counter top wash hand basin of size 695 MM X 395 MM X 130 MM including all necessary fitting such as 15 mm CP pillar cock fancy type, CP waste coupling 32mm dia, PVC waste pipe etc ,complete all as specified and as directed by Engr-in-charge.

S&F stainless steel high grade AISI 316 Stainless steel Cabinet handle Dia 8mm X 160mm (C/c) satin finish both end of handle are bent at 90 Degree and finished with zero-zero tolerance ,complete all as specified and as directed by Engr-in-charge.

S&F Stainless Steel work in repairs as Gde 304 SS in stair case railing/ ladder/grab bar , round balls,ss locks ,clips ss welding etc completed including all fitting and fixing all as specified and directed by Engr in Charge.

S & F in repairs Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws ,complete all as specified and as directed by Engr-in-charge.

M& L for Post construction Anti termite treatment of soil under existing floors using emulsion chloropyrphos treatment of soil under hole, 300mm apart including drilling and plugging 12mm dia holes with cement morter 1:2 (1 cement : 2 coarse sand) to match existing floors complete all as specified and directed by Engr-in- charge.

M& L for providing and injecting chemical chloropyrphos emulsion (with 20% EC) for post construction antitermite treatment along external wall below concrete or masnory apron @ 2.25 Ltr per running meter including drilling and plugging complete all as specified and directed by Engr-in- Charge.

M& L for Post construction Anti termite treatment at point of contact of wood work by chemical emulsion Chloropyrphos (20EC) (in oil or kerosene based solution) @ 0.5 Ltr/ hole by drilling 6 mm dia hole at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed by Engr- in -Charge.

S & F in repairs 40 mm dia cupboard knobs fixed with nut, screw and washer of mild steel bright finished ,complete all as specified and as directed by Engr-in-charge.

M&L for 25 x 3mm FI holdfasts ,complete all as specified and as directed by Engr-in-charge.

S&F aluminium andodized, 150mm length of bolt barrel tower bolts of extruded section ,complete all as specified and as directed by Engr-in-charge.

S&F Stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm ,complete all as specified and as directed by Engr-in-charge.

S&F framed stainless steel sections as in drawers and pull up cuboards, design as approved of any size and shapes including clips and washers,etc to fix it to the prelaminated PVC sheets , plywood etc in cabinets,etc of stainless steel grade 304, all as approved and directed during execution complete all as specified and directed by Engr-in-charge..

S & F in repairs 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or crank hook bolt in lieu of screw ,complete all as specified and as directed by Engr-in-charge.

Dismantling of brick work or stone/boulder built in lime mortar or cement mortar including all quins, arches pillars etc but excluding ashlar facing dressed stone work & precast concrete articles for portion ordered to be dismantled and removing debris outside MOD land.

M & L for Pre-cast cement concrete type B1,1:2:4 (20mm graded stone aggregate )block masonry with solid blocks,exc 10 cm in width and setting in mortar ,complete all as specified and as directed by Engr-in-charge.

M&L brick work with sub class ‘B’ bricks straight of curved on plan exc 6m mean radius built in in CM 1:6 ,complete all as specified and as directed by Engr-in-charge.

M&L for pre cast RCC M-20 for Drain cover and similar works supported on walls and set in CM 1:4 , incl 8mm dia reinforcement, handle for covers sizes of covers and thickness etc incl demolition of old cover slab ,complete all as specified and as directed by Engr-in-charge.

S&F 6mm thick polycarbonate double layered sheets of approved shades fixed over roof trusses fixed with self tapped screw, complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises ,complete all as specified and as directed by Engr-in-charge.

M&L for light shade vitrified ceramic tiles 8 to 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm in floor & skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer or mortar for laying floor finishes in CM 1:6 ,complete all as specified and as directed by Engr-in-charge.

M&L for Virified Ceramic tiles light shade 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.45 sqm but not exceeding 1.00 sqm, in floors & skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer or mortar for laying floor finishes in CM 1:6 ,complete all as specified and as directed by Engr-in-charge.

M&L for 900x450x7mm thick glazed coloured ceramic tiles as in vertical surface and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick in CM 1:3 as backing coat on wall surface,complete all as specified and as directed by Engr-in-charge.

M& L for Non - skid Ceramic Coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry andpointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer or mortar for laying floor finishes in CM 1:6 ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs Double action floor spring Hydrauilically regulated made up of minimum 1.00 mm to 1.40 mm thick aluminium alloy sheeet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs 2 way bib cock for hand faucet of Jaquar series having model No.ALI85041 with wall flange ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs 6mm thick polycarbonate double layered sheets of approved shades fixed over roof trusses,wall ,gates etc fixed with self tapped screw,complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 500 Liters capacity triple layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform including all fitting such as connection pipe pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including fixing only ball valves ,complete all as specified and as directed by Engr-in-charge.

S&F 1000 Ltr rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position upto 10m height of slab all as specified in SSR Part I including dismantling water tank ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs Rotational moulded polyethylene water storage tanks 2000 Litres capacity triple layered (cylindrical vertical with closed top) hoisted and fixed in position upto roof height 20m all as specified in SSR Part I ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs vitreous china white Table top wash basin having size 450mm x 400mm x 160 mm , Rectangle bowl, Snow White in colour , Make:- CERA , Cat No. : S2020101 ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs 15 mm size Kitchen sink faucet with pull down sprayer in stainless steel Dratal pull out sprayer faucet kitchen flexi spout brushed steel (DT-1) ( item diamentions - 32cm X 8cm x 8cm ),complete all as specified and as directed by Engr-in-charge.

Labour for cleaning /cleaning of blockage of manholes, gully traps, floor traps, vertical soils/ waste pipe of different dia and sewage lines/drain of any depth in the area of the AF Station Mumbai. (Domestic and technical area) by providing and deployment of 02 (TWO) Nos of Labours per day including Sundays and Holidays. Note:a) The labour 02 nos at Kalina and Santacruz will report daily at 0845 hrs on all working days including Sundays and holidays (alternate arrangement to give a labour atleast one day off per week) at MES complaint cell centre and attend complaints till 1645 hrs given by Engr -In- Charge . Complaints needs to be cleared within 24 hrs after receiving the complaints . The contractor will deploy requisite labour and supply all T&P ( mechanical Iron rods, knot ropes , bamboo etc) scaffolding ladders any other materials required to clear the blockages at the site without any extra cost .Labour for cleaning of sludge from sewage lines (any dia) to manhole is included in quoted rates. In case any labour does not report to Engineer In Charge for the whole day or found missing more than half an hour on any day, Panel recovery @ RS 2000/- per head per day shall be made proportionally from contractor's dues. b) The recovery will be made from the contractor @Rs 1000 per complaint which are not cleared within 24 hrs from the date and time of receipt of complaints. Decision of Engr-In- Charge is final in this respect. The above item includes conveyance cost of labour with their tools to travel from pocket to pocket to attend complaints including removal of sludge from the site to outside MOD land at a distance not exc 5km (The department shall not be liable to provide any kind/form of transportation to the labour). (c) Registers of labour attendance and complaints shall be maintained by contractor at their own cost,which shall be kept in the custody of MES Department(complaint cell) duly signed by contractor's representative ,JE(civil) and Engineer in charge. (d) Above item includes conveyance cost of labours to attend complaints from pocket to pocket area of AFS Mumbai.

Opening cover of septic tank, de watering and taking out night soil/excreta sludge etc from septic tank and removing sludge outside MD land and cleaning the septic tank as per BMC rules and placing the cover in original position all as directed.

Demolition of pre cast reinforced concrete manhole cover of any description and any position not otherwise specifically provided for and removing demolished materials outside MOD Land.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoin arches, pillars etc but excluding ashlars facings, dressed stone work and pre cast concrete articles and depositing the debris outside MOD Land.

Demolition of Precast cement concrete block walling built in cement morter including all quoin arches, pillars etc but excluding ashlars facings, dressed stone work and pre cast concrete articles and depositing the debris outside MOD Land.

Excavation in trenches not exceeding 1.5m ;wide and n.exc 1.5m in depth for foundation etc or shafts. Wells etc not exceeding 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil ,complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm ,complete all as specified.

Removing excavated material exc.250 Km but not exc 500 mtr or post & deposit in as sirected by Engr-in- Charge

Demolition and breaking up 300mm bore drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar and removing and depositing the debris outside MOD Land complete all as directed by Engineer-in-Charge.

Demolition and breaking up 150mm bore drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar and removing and depositing the debris outside MOD Land complete all as directed by Engineer-in-Charge.

Demolition and breaking up 100mm bore drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar and removing and depositing the debris outside MOD Land complete all as directed by Engineer-in-Charge.

M&L cement Concrete bed to drain pipe of 300mm bore dia including packing under including packing under & hunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate), complete all as specified.

M&L cement concrete 1:4:8 type D2 concrete bed to drain pipe of 150mm bore dia including packing under & hunching against the sides of pipes after all as specified

Ditto as per Srl Item No 166.00 above but for bore of pipe 100mm dia complete all as specified.

M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars,300 mm dia pipe ,complete all as specified.

M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars,150mm dia pipe ,complete all as specified.

M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars,100 mm dia pipe ,complete all as specified.

M&L providing reinforced cement concrete 1:2:4, type B1 (20mm graded agg) set in Cement morter 1:6 for cover slabs (for manholes etc) ,complete all as specified.

Supply and fix in repairs of salt glazed stone ware gully traps square or round mouthed type ‘P’ of size 150mmx100mm complete all as specified.as an repairs takingout old existing gully trap ,complete all as specified.

M&L for pre cast cement concrete block masonary with solid block of PCC 1:5:8 exc 10cm in wedth & setting in CM 1:6 complete all as specified.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound including finished even and smooth without using extra cement complete all as specified. Note : Water proofing compound will be measured and paid separately

Supply only integral water proofing compound ,complete all as specified.

Taking out existing CI nahani trap 100mm bore & supply & fix CI nahani trap with CP grating 110mm bore depositing old trap outside MOD Land complete all as specified.

Taking out existing CI nahani trap 75mm bore & supply & fix CI nahani trap with CP grating 110mm bore and depositing old trap outside MOD Land complete all as specified.

M&L for Cement concrete 1:3:6 type c1 (Using 20mm graded stone aggregate) as in coping, for manholes etc including weathering slightly rounded or chamfered angles and throating including necessary formwork as direct by Engineer –in-Charge.

M&L in repair Cast iron floor trap, with grating including jointing to waste pipe in run lead, diameter of outlet 75mm ,complete all as specified.

Fixing only Cast iron floor trap, with grating including jointing to waste pipe in run lead, diameter of outlet 75mm ,complete all as specified.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints , laid in trenches / floors or fixed to walls ,complete all as specified.

S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints , laid in trenches / floors or fixed to walls ,complete all as specified.

S&F in repairs 75 mm bore PVC (SWR) bends ,complete all as specified.

S&F in repairs 110 mm bore PVC (SWR) bends provided with access door ,complete all as specified.

S&F in repairs 75 mm bore PVC (SWR) bends provided with access door ,complete all as specified.

S&F in repairs 110 mm bore PVC (SWR) branch pieces,single (single Y) equal or unequal

S&F in repairs 75 mm bore PVC (SWR) branch pieces,single (single Y) equal or unequal ,complete all as specified.

S&F in repairs 110 mm bore PVC (SWR) junction ,single (single T) equal or unequal ,complete all as specified.

S&F in repairs 75 mm bore PVC (SWR) junction ,single (single T) equal or unequal ,complete all as specified.

S&F 110 mm bore PVC (SWR) reducers ,complete all as specified.

S&F 110 mm bore PVC (SWR) vent cowl ,complete all as specified.

S&F 75 mm bore PVC (SWR) vent cowl ,complete all as specified.

Demolition of floor or wall tiles, stone slab of any description or thickness laid ,bedded and pointed in any morter all as specified and removing demolished materials and debris outside MOD land ,complete all as specified.

M & L for Granite (of any type) tiles 20 mm thick machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over 10 mm thick in cement mortar (1:4) as in backing coat for fixing of granite in vertical surfaces including grinding and polishing ,complete all as specified.

M & L for Granite (of any type) tiles 20 mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over 10 mm thick in cement mortar (1:4) as in backing coat for fixing of granite in vertical surfaces including grinding and polishing ,complete all as specified.

M & L for Machine cut cudappah stone slab 20 to 25 mm thick over cement screed bed of 15mm thick in CM 1:6 , laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and pointing ,complete all as specified.

M & L for rounding the edges of stone slabs one edge, such as in steps, cooking platform and other simillar situations ,complete all as specified.

M&L in repairs chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigment in floors ,complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and Grill on drain etc similar work conforming to Fe.290.Gde-E-165 ,complete all as specified.

Note for all Item Included in BOQ: 1.The contractor shall deploy skilled tradesman i.e. carpenter, plumber , mason , welder etc with his helper. All workers need to be having police verification for Airport entry (MIAL) and required T&P , and collect the complaints slips daily morning from AGE B/R (AF) Kalina office by the contractor/supervisor and same shall be resubmitted at evening within completion of job duly signed by user. 2.In case of failure to attend the complaint within 48 hrs the contractor shall be charged @400 Rs per complaint against outstanding complaint. 3.After Perodical service of the Qtr/building the contractor will clean all the paint marks from glass panes , electric switch boards and fittings , doors windows and should clean the floor , dado and all scraped material shall thrown away from MOD land without any extra cost.

Maaz Construction