NAME OF WORK SPECIAL REPAIR TO BUILDING

Amount

Schedule 'A' -Part I (B/R Works)

Dismantling of wall & ceiling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets all as specified and as directed.

S&F GI frame work for seamless ceiling compressing of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 to 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.90mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling (section not exceeding 1.2m length) of 0.55 mm thickness having knurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre all as specified and as directed

S&F Hangers 6 mm dia GI (up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5mm dia 40 mm long complete all as specified and as directed

S&F Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board 8 mm thick of siliceous & calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling & tapping screws having Phillips head with under head cutter at 200 mm C/C including finishing the joint of face board with specially formulated jointing compound & 48 mm wide fibre tape to provide seam less finish all as specified and as directed Note: Frame work for ceiling shall be measured and paid separately

M&L for preparing newly surface of ceiling and apply two coats of oil bond distemper white and tinted over a coat of alkali resistant primer all as specified and as directed

Taking down cement plaster of stone /PCC block /brick wall / top of chajja, or concrete surface of any description including raking out joints hacking for key securing down with water etc and removal of debris to outside of INS Mandovi Area including filling of open joints in cement mortar 1:6 complete all as specified and as directed

M & L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finish even and smooth without using extra cement all as specified and as directed

M & L for 15 mm thick (10+5) rendering in cement mortar 1:4 on fair faces of brick work or concrete surface with liquid WPC (mixed with 5mm thick plastering) as per manufacturer instruction and finished surface even and smooth without using extra cement complete all as specified and directed Note - liquid WPC shall be measured and paid separately

Supply only WPC all as specified and as directed

M&L for applying two coats of anti fungal weather proof paint over a coat of primer on newly plastered surfaces including preparation of surfaces all as specified and as directed

M&L for preparation of newly plastered surfaces preparatory to distempering, Priming plastered and other surfaces with alkali resistant priming paint, 1mm thick wall care putty & distempering walls with two coats of distemper oil emulsion, white or tinted all as specified and as directed

Dismantling PCC Floor, hearth or wall tiling including cement mortar Bedding, removing serviceable tiles to stores and removing debris to a distance exceeding 250 m and not exceeding 1000 m spread and leveled all as specified and as directed

M & L for screed Bed or Bedding Layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes all as specified and as directed

M&L for non - skid ceramic tiles coloured 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sq m, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed

M&L for non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sq m, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed

M & L for rendering 10 mm thick in cement mortar 1:4 on vertical Surface as backing coat for tiling all as specified and as directed

M&L for glazed ceramic coloured tiles in vertical surface/skirting 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified and as directed

M & L for machine cut cuddapah stone slab 20-25mm thick over cement screed base ,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed

Rounding to edge of stone slab one edge of stone as in cooking platform & staircase thread and other similar situation all as specified and as directed

M&L for kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed

Demolition of cement concrete of any description on roof, floor (other than ground floor) beam, staircase, landing etc all as specified and as directed

M&L for 100 mm thick cement concrete type B- 2, 1:2:4 using 40mm graded stone aggregate in sub- floors , sub bases, floors and pavings etc all as specified and as directed

M&L for 40 mm thick cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate in sub- floors , sub bases, floors and pavings etcall as specified and as directed

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments all as specified and as directed

Taking down steel tubing and connections 15 mm bore all as specified and as directed

Taking down steel tubing and connections 20 mm bore all as specified and as directed

S & F CPVC 20 mm pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed

S & F CPVC 25 mm pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed

S & F in repairs 15 mm stop valve of fancy type chromium type cast copper alloy with crutch or butterfly handle, screwed down, any colour high pressure screwed for iron pipe (Minimum weight 15mm-90gms/ 20mm- 92gms) all as specified and as directed Make: Code -FON-40053 of jaguar or equivalent as per Appendix ‘B’

S & F in repairs 15 mm bib tap standard of fancy type chromium type cast copper alloy with crutch or butterfly handle, screwed down, any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms all as specified and as directed Make: Code -CON-037KN of jaguar or equivalent as per Appendix ‘B’

S & F in repairs 15 mm Two way Bib taps, fancy type chromium type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed Make : Code -FON-041KN of Jaguar or equivalent as per Appendix ‘B’

S&F 2 in 1 Health Faucet with Hook (Chrome Plated) 1.5 m tube all as specified and as directed

S&F in repairs swivel shower of any colour for fixing with 15mm pipe. (Minimum weight 40gms) & Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms all as specified and as directed

S&F in repairs chromium plated soap dish approximate size 160 x 160 x 90 mm embedded in wall all as specified and as directed

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) all as specified and as directed

S&F in repairs Pillar taps fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered hot and cold with long screwed shanks and fly nuts, screwed for iron pipe all as specified and as directed

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover all as specified and as directed

Supply 10 litres capacity PVC valve less, syphonic action type, flushing cistern ,low level, white with inlet, ball valve ,float and handle including brackets & Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern & fixing High or low level flushing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any all as specified and as directed

S & F PVC Connection of size 15 mm ,450 mm long with PTMT nuts all as specified and as directed

S & F Wash basins, Vitreous China (flat back white) 550mmx400mm size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe fixed in repairs & Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern all as specified and as directed

S&F in repairs stainless steel plate utensil rack of size 900 X 600 X 1mm thick, 30cm width and fixed to wall surface with necessary bolts all as specified and as directed Make: Hindustan , Nirali or equivalent as approved by GE.

S&F in repairs sink made of stainless steel 1 mm thick kitchen with plug ,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm bowl size 410mm x 330mm x160mm all as specified and as directed

S&F Magic eye lenses on entrance door all as specified and as directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) exceeding 250 and not exceeding 500 ltrs all as specified and as directed

Dismantling water tanks and removing to store exceeding 250 Ltr and not exceeding 500 Ltr all as specified and as directed

S&F 500 Litre rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and as directed

S&F Ball valves 25mm bore dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipeand fixed in repairs . (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm- 690 gms) all as specified and as directed

S&F 25 mm bore CPVC ball valve all as specified and as directed

S&F 25 mm CPVC tank adaptor all as specified and as directed

Taking down chowkats with shutters (without taking off shutters from the frames) not exceeding 1.5 Sq m each all as specified and as directed

Taking down chowkats with shutters (without taking off shutters from the frames) exceeding 1.5 sq m but n exceeding 4 Sq m each all as specified and as directed

S&F Factory made paneled FRP door shutters, 30 mm thick with 2 mm thick FRP lamination top rail of size 25 X 150 mm, lock rail and bottom rail of size 25 X 150 mm with 12 mm thick panels of FRP sections of box type construction as per IS 4020 core shall be polyurethane foam/high density (more than 40 Kg per cubic meter) cellular foam done in situ and fixed in position as per manufacturer's instructions with and including the following fittings and as directed ( the thickness of FRP shutter and panels shall be inclusive of 2mm thick FRP lamination) Fittings to be provided per shutter: Stainless Steel 100 mm long butt hinge 03 nos, aluminium anodised 200 mm long barrel tower bolt 02 Nos, aluminium anodised 150 mm size bow handles -02 Nos all as specified and as directed Make: Delux polyfab, Advance marketing/ Sal swarn/ Quality Decor/ Festel tanks Pvt Ltd/ Omega

S&F 100mm X 63 mm size factory made FRP door frame, frame fixed with 3 Nos on either side with MS flat iron 25 mm x 3mm cut to size and made to shape and fixed as in hold fast after necessary tarring and sanding and fixed as per manufacture instruction and as directed. Thickness of FRP lamination shall be 2 mm. Core shall be polyurethane foam/high density (more than 40 Kg per cubit meter) cellular foam done in situ. Second class wooden blocks shall be provided to hold the fittings. The size of the chowkats shall be inclusive of 2 mm thick FRP lamination all as specified and as directed Make : Delux polytab, Advance marketing/Quality Decor/Festel Tanks Pvt Ltd/Omega Fiber, Verma Goa as approved

S&F Door helical spring 300 mm , brass rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed

S&F Aluminium , anodized barrel tower bolt of extruded section and fixed 200mm long in size all as specified and as directed

S&F Extruded aluminium alloy handles, fabricated type, anodized. 200 mm long in size all as specified and as directed

S&F Stainless steel hinge, size 100 mm all as specified and as directed

S & F Floor door stopper 150mm long of aluminium alloy body and fixed to door shutter all as specified and as directed

S&F Aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt or extruded section or cast aluminum alloy and fixed 300mm size all as specified and as directed

M&L for forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in cement mortar 1:6 all as specified and as directed

S&F Aluminium powder coated window/ventilators shutter including frame, any type sliding or openable with frame, & other similar work etc. fabricated by using the JINDAL/HINDAL CO standard section including necessary arrangements to receive 4mm thick glass or wire mesh with aluminium channel beading & stainless steel screws including the cost of rubber gasket/rubber beading etc. complete including necessary handles, roller wheels, hinges etc complete all as specified and as directed. Note :- Weight of aluminium section shall be measured exclusive of all fittings fixtures, hinges, handle, bolts, rubber gasket/rubber beading and locking arrangements.

S&F Aluminium grill, 7.5 mm thick as per design code No. DG 007 of DURAL GRILL all as specified and as directed

S&F 4 mm thick Sheet glasses panel aluminium window/ventilator, ordinary quality and glazing with oil putty in square exceeding 0.5 sq. m in each pane all as specified and as directed

S&F Figured glass 4mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane all as specified and as directed

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples all as specified and as directed

S&F 19 mm dia decorative aluminium anodized alloy curtain rod fixed with two brackets in each window length all as specified and as directed

Taking down eaves gutters, sewage lines and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) all as specified and as directed

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and as directed

S&F 110 mm dia PVC (SWR) pipe with single socketed in any length solvent cement jointed fixed to wall/column all as specified and as directed

M&L in repairs for 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement fixed all as specified and as directed

S& F PVC (SWR) bends any radius 110 mm bore with access door all as specified and as directed

S& F PVC (SWR) bends any radius 75 mm bore with access door all as specified and as directed

S&F PVC (SWR) junction single, (Single T) equal or unequal 110mm bore with access door all as specified and as directed

S&F PVC (SWR) junction single, (Single T) equal or unequal 75mm bore with access door all as specified and as directed

S&F PVC (SWR) vent cowl 75mm dia all as specified and as directed

S&F PVC (SWR) vent cowl 110mm dia all as specified and as directed

S&F Second class hard wood 35 mm thick Glazed and skeleton shutters , open rebated and prepared to receive glass, gauze, etc. divided into squares with plane, chamfered or rounded , mitred rebated sash bar, any number, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and as directed

S&F Factory made second class hard wood plain framed panelled shutter (Two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm veneered particle board with commercial veneered on both faces the size of rails and style as per 1S 1003 (Part-I) kiln seasoned and chemically pressure treated 40mm thick all as specified and as directed

M&L for second class HW plain solid straight chowkhat and frames wrought, framed rebated on solid, rounded or chamfered put together with glued pinned at joints all as specified and as directed

M&L for preparing new wooden surface & applying two coat of synthetic enamel paint over one coat of pink primer all as specified and as directed

M&L for preparation old painted surfaces of wood and applying one coat of synthetic enamel paint of any description not other described over 10cm width or girth all as specified and as directed

M&L for 19 mm thick prelaminated particle board in cupboard shelves, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination all as specified and as directed

Dismantling plain or corrugated steel sheets (corrugated, semi corrugated, etc.) sheets in roof coverings all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-290 Gde E-165 all as specified and as directed

Erection & fixing only Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-290 Gde E-165 all as specified and as directed Note: Steel obtained from Item No.85 to be used

M&L for preparing new steel surface and applying two coats of corrosion resistant paint over one coat of red oxide primer surfaces of any description, over 10 cm in width or girth, not other wise description all as specified and as directed

M&L for preparing old steel surface and applying two coats of corrosion resistant paint over one coat of red oxide primer surfaces of any description, over 10 cm in width or girth, not other wise description all as specified and as directed

Schedule 'A' -Part II (E/M Works)

Taking down carefully copper / aluminium point wiring ( Light, fan, socket or power) complete including fitting and fixture such as switches ,ceiling roses, pendants ,regulators, socket, light fitting etc removing material to store for keeping in safe custody or for taking credit( credit for above item should be made as as per condition separately) and making good disturbed surface of walls, floors etc all as specified and as directed.

Taking down DB TPN, Main switch, sheet metal enclosure all as specified and as directed.

Taking down sub main wiring all as specified and as directed.

M & L for point wiring of one light point controlled by one switch with cable 1.5 sq mm copper cable in multi stranded unsheathed through concealed in wall with PVC conduit with all accessories including 1.5 sq mm cable conductor for earth wire including making connection with common earth dolly including pressed steel terminal boxes firmly fixed with pipe /wall and 3mm thick hylem sheet or plastic amazonite laminated sheet top cover fixed with brass screw for mounting switches sockets regulator etc all as specified and as directed.

All as per Item No 95 here in before but for ceiling/exhaust fan all as specified and as directed.

All as per Item No 95 here in before but for switch socket combination 3 pin 5 amps on independent board all as specified and as directed.

All as per Item No 95 here in before but for bell point all as specified and as directed.

All as per Item No 95 here in before but 2.5 sq.mm pvc insulated and unsheathed copper conductor for switch socket combination 3 pin 15 amps on independent board all as specified and as directed.

S&F Switch piano, flush type single pole ,one way 5 amp all as specified and as directed.

S&F Bell buzzer 240Volts all as specified and as directed.

S&F Bell push , flush type 5 Amps all as specified and as directed.

S&F Switch socket combination 5 pin 5 amp 230 volt 50 HZ AC supply all as specified and as directed.

S & F Switch socket combination 05 pin 15 Amp 230 Volt all as specified and as directed.

S&F Fan regulator electronic step type all as specified and as directed.

S&F in repairs LED tube light fitting 1 X 20 watt baton T5 CLASSIC integrated LED channel integral sleek extruded polycarbonate LED channel with white acrylic cover along with LED tube ROD 01 No including flexible wire three core from existing ceiling rose to fitting duly mounted on PVC block with steel screw & sleeves complete all as specified and as directed

S&F in repairs LED tube light fitting 1 X 10 watt baton T5 Mushroom integrated LED channel integral sleek extruded polycarbonate LED channel with white acrylic cover along with LED tube ROD 01 No including flexible wire three core from existing ceiling rose to fitting duly mounted on PVC block with steel screw & sleeves complete all as specified and as directed

Taking down ceiling fan of any make single phase and painting of ceiling fan complete in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust and re- fixing again in same position all as specified and as directed.

S&F MCB 6-32 Amp 240 Volt single pole 'B' series all as specified and as directed.

S&F MCB DP 32 Amp 230 Volt 50HZ AC supply all as specified and as directed.

S & F in Ceiling rose, 3 phase/ PVC / polycarbonate, isolated body complete all as specified and as directed.

S&F Sheet metal enclosure double door DB SPN 8 way 240 volts 50 Hz IP-43 protection all as specified and as directed.

S&F MCB (DB) Vertical (TPN) 4 way double door 415 Volts complete including taking existing old unserviceable all as specified and as directed.

S&F MCB TPN 415 Volts 63 Amps 'B' series all as specified and as directed.

Taking down single phase exhaust fan of any size existing in location cleaning, greasing and re-fixing again in same position all as specified and as directed.

M & L for sub main wiring with 02 run of 4 sq mm single core copper cable PVC insulated unsheathed multi stranded 1100 volt grade drawn through PVC conduit of suitable size with accessories etc concealed in wall/ceiling with and including one run of 1.5 sq mm single core copper cable run through concealed PVC conduit Make Plaza/ Finolex NOTE :- Two run of 4 sq mm single core cable and 01 run of 1.5 sq mm single core cable as earthing contnuity conductor with PVC conduit shall be measured as one unit length all as specified and as directed.

S&F Sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 240 Volts 10 Amps all as specified and as directed.

Taking down geyser of any capacity single phase and re- fixing again in same position all as specified and as directed.

M & L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly on ground earth pit not less than 2.25 m deep below the ground bend with top edge of the plate n. less than 1.5m below ground level connected to GI earth wire 4mm by means of bolts, nuts, checks nuts and washers of galvanised steel including necessary earth work and excavation in any strata and PCC 1:3:6 type C2 chamber and chamber cover and light grade GI pipe 40mm dia for protection of strip and fund etc complete all as per electrical plate No. 3 of SSR Part-I including connections with testing point of lightening protection all as specified and as directed.

M & L for sub main wiring with 02 run of 2.5 sq mm single core copper cable PVC insulated unsheathed multi stranded 1100 volt grade drawn through PVC conduit of suitable size with accessories ext concealed in wall/ceiling with and including one run of 2.5 sq mm single core copper cable run through concealed PVC conduit all as specified and as directed. Note: Three runs of 2.5 sq mm and one run of PVC conduit shall be measured as unit length.

Schedule 'A' -Part III (Sewage Disposal)

Excavation in trenches not exceeding 1.5 deep and not exceeding 1.5 m wide in soft/disintegrated rock for foundations etc and getting out all as specified and as directed.

Returning filling in including spreading, levelling watering and well ramming in layers not exceeding 25 cm in soft/disintegrated rock all as specified and as directed.

Removing excavated material and not exceeding 50m and depositing where directed in soft disintegrated rocks all as specified and as directed.

Demolition of cement concrete (un-reinforced) of any description and in any position such as in bed for drain pipe etc complete all as specified and as directed.

Demolition and breaking up of 150mm/160mm drain pipes (Salt glazed ware/AC/PVC) set in cement mortar all as specified and as directed.

M&L for concrete bed to drain pipe of 160mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete type C2 (1:3:6) all as specified and as directed.

M&L for PVC (SWR) pipes 160mmsingle socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

Demolition of brick work or stone / boulder masonry built in cement mortar all as specified and as directed.

M&L for precast cement concrete block masonry type 01 1:3:6 using 20 mm graded stone aggregate with solid blocks exceeding 10 cm in width and set in cement mortar 1:6 complete all as specified and as directed.

M&L for precast cement concrete block masonry type 01 1:3:6 using 20 mm graded stone aggregate with solid blocks exceeding 10cm in width and set in cement mortar 1:6 complete except block all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on brick masonry surface finished even and smooth without using extra cement all as specified and as directed.

M&L for providing cement concrete (1:2:4) type B1, using 20mm graded crushed stone aggregate in, copings, benching to manholes, water troughs and like including weathering slightly rounded or chamfered angles and threading, and including necessary form work complete all as specified and as directed

M&L for pre cast cement concrete (1:2:4) Type B1, using 20mm graded crushed stone aggregates in cover slabs, set in cement mortar 1:4 with plain faces, complete all as specified and as directed Note: - Reinforcement steel shall be measured and paid separately under appropriate item of Schedule 'A'. .

S &F Mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.