PROVISION OF EXTERIOR EMULSION WEATHER PROOF PAINT OF VARIOUS BLGDS AT NAGROTA MIL STN UNDER GE NAGROTA

Amount

Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water, at any description with necessary scaffolding of max height for G+2 Bldgs etc complete all as specified and as directed.

M&L for rendering 10 mm thick in CM (1:6) on wall/ concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M & L for Rendering 15mm thick in two layer (10mm+5mm) in cement mortar 1:4 on fair faces of brick work / concrete surfaces finished even and smooth with out using extra cement using WPC complete all as specified and as directed by the Engineer-in-Charge Notes:- (i) Water proofing compound to be used only on top layer of plaster (i.e. 5mm thick) (ii) Qty of WPC to be used @200ml per cement bag or as per manufacturer's instructions (iii) WPC shall be measured and paid separately

M&L for rendering 5mm thick in ceiling using cement mortar 1:3 on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer over 2-3mm JK/Birla wall care putty complete all as specified and directed. Note : (a) Distemper work to be carried out through machinery(spray painting) only by authorized dealers/ applicators. (b) Sufficient quantity of material will be brought at site by the contractor before commencement of work for entire satisfaction of user as well as Engineer in charge. (c) The bills produced by the contractor will be vetted from the manufacturer and fwd to GST section/ council for verification by GE.

Material and Labour for complete removal of old plastered surfaces and applying two coats of Anti fungal weather coat with acrylic smooth exterior emulsion paint applied @1.67kg/10sqm, of required shade over a coat of primer applied @2.20kg/10Sqm on new / old surfaces including 2-3mm thick wall care putty or white cement paste mixed with water as a binding coat, including necessary scaffolding of max height for G+2 bldg, etc complete all as specified and directed. Make of Acrylic emulsion weather coat paint :- Asian (Apex Ultima) ,Berger (Super coat ) or ICI Dulux (weather shield). Make of primer :- Asian or Equivalent . Note:- (a) Preparation/ scrapping of surfaces will be carried out through machinery only. (b) Each stage i.e. application of primer, application of exterior emulsion first and second coat will be passed from Engr-in -Charge. All painting work will be carried out through machinery(spray painting) only. (c) A warranty of four years or as per manufacturer's instructions, whichever is higher and 2% of retention money as a guarantee against the work done will be furnished by the tenderer for all interior and exterior painting work. (d) Sufficient quantity of material will be brought at site by the contractor before commencement of work for entire satisfaction of user as well as Engineer in charge. (e) The bills produced by the contractor will be vetted from the manufacturer and fwd to GST section/ council for verification by GE.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil emulsion distemper complete all as specified and directed. Note:- (a) Preparation/ scrapping of surfaces will be carried out through machinery only. (b) All Distemper work to be carried out through machinery(spray painting) by authorized applicators only. (c) Sufficient quantity of material will be brought at site by the contractor before commencement of work for entire satisfaction of user as well as Engineer in charge. (d) The bills produced by the contractor will be vetted from the manufacturer and fwd to GST section/ council for verification by GE.

M&L for preparation of old decorated plastered or unplastered surface including complete removal by machinery only, scraping down smoke soot, moulded, moss, efflorescent salt, cleaning oil and greasy spots and applying two coat of Oil bound distemper on walls over 2-3mm thick plaster of paris/ wall care putty as specified and directed by Engr-in-Charge. Note:- (a) Preparation/ scrapping of surfaces will be carried out through machinery only. (b) All Distemper work to be carried out through machinery(spray painting) by authorized applicators only. (c) Sufficient quantity of material will be brought at site by the contractor before commencement of work for entire satisfaction of user as well as Engineer in charge. (d) The bills produced by the contractor will be vetted from the manufacturer and fwd to GST section/ council for verification by GE.

M&L for preparation of old plastered surfaces of ceiling and applying one coat of oil emulsion distemper over a coat of primer complete all as specified and directed. Note:- (a) Preparation/ scrapping of surfaces will be carried out through machinery only. (b) All Distemper work to be carried out through machinery(spray painting) by authorized applicators only. (c) Sufficient quantity of material will be brought at site by the contractor before commencement of work for entire satisfaction of user as well as Engineer in charge. (d) The bills produced by the contractor will be vetted from the manufacturer and fwd to GST section/ council for verification by GE.

Complete removal of existing treatment and applying two coats of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth complete all as specified and directed. Note:- (a) Painting work to be carried out through machinery(spray painting) by authorized applicators only. (b) Sufficient quantity of material will be brought at site by the contractor before commencement of work for entire satisfaction of user as well as Engineer in charge. (c) The bills produced by the contractor will be vetted from the manufacturer and fwd to GST section/ council for verification by GE.

Complete removal of existing treatment and applying two coats of synthetic enamel paint on steel surfaces of any description over 10cm width or girth complete all as specified and directed. Note:- (a) Painting work to be carried out through machinery(spray painting) by authorized applicators only. (b) Sufficient quantity of material will be brought at site by the contractor before commencement of work for entire satisfaction of user as well as Engineer in charge. (c) The bills produced by the contractor will be vetted from the manufacturer and fwd to GST section/ council for verification by GE.

Demolition of cement concrete including floor tiles or stone of any description and in any position etc and removal from site up to 500 m complete all as specified and directed

M&L plain cement concrete 1:3:6, type C1( using 20mm graded stone aggregate) 75mm thick as in plinth protection complete all as specified and directed .

S & F in repairs cast iron floor trap / nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), dia of outlet 75mm bore complete all as specified and as directed

S&F in repair 100mm bore Cl bend, diminishing pieces or tapers (larger bore measured) complete all as specified.

S&F in repair 75mm bore Cl bend, diminishing pieces or tapers (larger bore measured) complete all as specified.

S & F in repairs cast iron branch / junction pieces, single (equal or unequal ) ordinary or inverted ( spigot or socket type) or with parallel branches of 100mm bore complete all as specified.

S & F in repairs cast iron branch / junction pieces, single (equal or unequal ) ordinary or inverted ( spigot or socket type) or with parallel branches of 75mm bore complete all as specified.

S & F in repairs 100mm bore cast iron soil, waste and vent pipes in any length with or without ears including jointing with cement joints , laid in trenches or in floors or in walls, complete all as specified and as directed.

S & F in repairs 75mm bore cast iron soil, waste and vent pipes in any length with or without ears including jointing with cement joints , laid in trenches or in floors or in walls, complete all as specified and as directed.

Taking up or down 15 mm dia old serviceable / unserviceable steel tubing any grade and connections, cleaning for re-fixing or removal to store, complete all as specified and directed .

All as per item no 22 above but 20mm bore complete all as specified and as directed.

S&F steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes, MS hooks etc, for 15mm bore pipes complete all as specified and as directed.

All as per item no 24 above but 20mm bore complete all as specified and as directed.

S& F in repair Rotational moulded Polyethylene three layer, white in colour water storage tank 500 liters capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR part I and including dismantling water tank complete all as specified and as directed.

S & F 20 mm bore ball brass valves high pressure with polythelene float and fly nut complete screwed for iron pipe and shelf of PTMT fixed length and complete all as specified and as directed. .

S&F of stop valves fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specified and as directed.

S & F MS framed work as in frame work water tank or other section with gusset plate, etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating,and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.

Taking down cement plaster or decayed portion of concrete from ceiling, chajja, upward facia, downward facia in any position, any height (upto 2nd floor) and making good by, rendering 15mm thick with CM 1:4 or PCC 1:2:4 type B1 (using 20mm graded aggtregate) as in ceiling or concrete surfaces such as chajja, upward facia, downward facia and similar work finished even and fair including dubbing coat without using extra cement upto, any height ( upto 2nd floor) including necessary scaffolding complete all as specified and as directed.

M&L for writing letters or figures (Block. Roman. Italic or Indian) to building with synthetic enamel paint 65mm long and 10mm wide in words and figures such as (PN-10,TN-27,T-123 & T-81/2 etc) over black synthetic enamel painted ground of 150mm dia incl obliterating old writting of any description n exc 0.10 sqm with paint to match existing work complete all as specified and as directed. Note- Rate shall be quoted considering PN-10/TN-27/T-123/T-81/2 No as a unit.

Note:- Schedule of credit Rs. 54,000.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/S. RAM PAUL KHAJURIA & BROS.