Supplying and Laying of HDPE Underground Pipeline Works

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

O/o DIVISIONAL SOIL CONSERVATION OFFICER, SANGRUR

Tender No: DSWC/DSCO/SGR/HDPE/2024-25/05

Name of the Firm/Bidder

Address of Firm/Bidder

Mobile No of Firm/Bidder Email ID of Firm

Name of work: Providing and Laying of High-Density Polyethylene (HDPE) Pipeline (PE-80, 4 Kg/Cm2 working pressure as per IS-4984-2016 standards); including all allied Electrical & Civil Works with Material from STP, Ahmedgarh (5MLD) (District Malerkotla) for Supply of Treated Water for Irrigation

Total Estimated Amount of Works Rs. 0_);\(0\) Rupees One Crore Forty Eight Lakhs Eighteen Thousands One Hundered Seventy Two Only

Quoted by Contractor {- or + to estimated amount, in figure upto 2 dcimal point only} Quote (-/+)

Note: Please quote only figure (upto 2 decimal points) in above blue colour box in minus or plus. Do not put %age sign after this figure. Please check Quoted Rate in Next cell.

Note: Please refer to DNIT for item wise rate and details.

Name of Work :- Providing and Laying of High-Density Polyethylene (HDPE) Pipeline (PE-80, 4 Kg/Cm2 working pressure as per IS-4984-2016 standards); including all allied Electrical & Civil Works with Material from STP, Ahmedgarh (5MLD) (District Malerkotla) for Supply of Treated Water for Irrigation

Item of Work Rate in (Rupees) Total in Rupees

Providing, Laying, Jointing and Excavation of Trenches with back filling of Pipeline system etc. complete (As Detailed in attached sheets) 8880872 Rupees Eighty Eight Lakhs Eighty thousand Eight Hundred Seventy Two only. 8880871.99

Civil Works for Construction of Sump Well for Irrigation with treated water 2129414 Rupees Twenty One Lakh Twenty Nine Thousand Four Hundred Fourteen Only 2129414

Civil Works for Construction of Pump Room (6mX4m) for Motors 730599.26 Rupees Seven Lakh Thirty Thousand Five Hundred Ninety Nine Only 730599.26

Providing and fixing of Pumping System complete 2437603 Rupees Twenty Four Lakh Thirty Seven Thousand Six hundred Three Only 2437603

Electric Fittings for pump house and pumps 457535.82 Rupees Four Lakh Fifty Seven Thousand Five Hundred Thirty Five Only 457535.82

Providing and Construction of Civil Work of Sluice Valve Chamber for 300mm Sluice Valve (Including Carriage). 53982.39 Rupees Fifty Three Thousand Nine Hundred Eighty Two Only 53982.39

Cost of Installation of RCC Pipes (NP-2) on Sluice Valves. 3165.04 Rupees Three Thousand One Hundred Sixty Five Only 3165.04

Sub total 14693172 Rupees One Crore Forty Six Lakh Ninety Three Thousand One Hundred Seventy Two Only 14693172

Digital Electromagnetic Water Flow Meter 100000 Rupees One lakh Only 100000

Auto Cutoff System 25000 Rupees Twenty Five thousand Only 25000

Grand Total 14818172 Rupees One Crore Forty Eight Lakh Eighteen Thousand One Hundred Seventy Two Only 14818172

Only one of the options is to be filled. More than one option shall be rejected.

Rate filled in any form shall be considered only in %age

Rate shall be filled both in figures and in words, otherwise tender shall be rejected

Rate filled at any other place in the document shall not be considered.

No condition shall be accepted.

4.3 Detail/Estimate of Work and Rates

Sr.No. Item of Work Rate in (Rupees) Total in Rupees

1 Providing, Laying, Jointing and Excavation of Trenches with back filling of Pipeline system etc. complete (As Detailed in attached sheets) 8880872 Rupees Eighty Eight Lakhs Eighty thousand Eight Hundred Seventy Two only. 8880871.99

2 Civil Works for Construction of Sump Well for Irrigation with treated water 2129414 Rupees Twenty One Lakh Twenty Nine Thousand Four Hundred Fourteen Only 2129414

3 Civil Works for Construction of Pump Room (6mX4m) for Motors 730599.26 Rupees Seven Lakh Thirty Thousand Five Hundred Ninety Nine Only 730599.26

4 Providing and fixing of Pumping System complete 2437603 Rupees Twenty Four Lakh Thirty Seven Thousand Six hundred Three Only 2437603

5 Electric Fittings for pump house and pumps 457535.82 Rupees Four Lakh Fifty Seven Thousand Five Hundred Thirty Five Only 457535.82

6 Providing and Construction of Civil Work of Sluice Valve Chamber for 300mm Sluice Valve (Including Carriage). 53982.39 Rupees Fifty Three Thousand Nine Hundred Eighty Two Only 53982.39

7 Cost of Installation of RCC Pipes (NP-2) on Sluice Valves. 3165.04 Rupees Three Thousand One Hundred Sixty Five Only 3165.04

8 Sub total 14693172 Rupees One Crore Forty Six Lakh Ninety Three Thousand One Hundred Seventy Two Only 14693172

9 Digital Electromagnetic Water Flow Meter 100000 Rupees One lakh Only 100000

10 Auto Cutoff System 25000 Rupees Twenty Five thousand Only 25000

Grand Total 14818172 Rupees One Crore Forty Eight Lakh Eighteen Thousand One Hundred Seventy Two Only 14818172

B. ABSTRACT SHEET OF MATERIAL FOR PIPELINE SYSTEM

S.No. Item Description CSR Item Qty Unit Rate Amount (Rs.)

1 Excavation by mechanical means (JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering, including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

A Earth work upto 1.5 m. Depth for all classes of soil except rocky 28.2 (a)(i)

Diameter of Pipes No. Length Breadth Height Qty.

a For 200mm Dia. Pipe 1

b For 250mm Dia. Pipe 1

c For 315mm Dia. Pipe 1 216.138

Total Quantity of Excavation 3620.54 Cum 99.1

2 Providing, Laying using JCB/Crane , fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI - 4984- 1995 casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications (Including riser pipe)

a H.D.P.E 200 mm o/d pipe of 4 kg./cm², PE-80 28.15 (E)(f) (A/C slip-2) 2270 mtr 1079.95

b H.D.P.E 250 mm o/d pipe of 4 kg./cm², PE-80 28.15 (E)(f) (A/C slip-2) 2820 mtr 1738.24

c H.D.P.E 315 mm o/d pipe of 4 kg./cm², PE-80 28.15 (F)(e) (A/C slip-2) 102 mtr 2897.58

d D.I 400 mm i/d pipe as per IS 8329 DI-K9 28.15 (F)(e) (A/C slip-2) 12 mtr 6350.86

3 Supplying, fixing and jointing H.D.P.E pipe's specials complete as desired by Engineer-in-Charge.

a For pipe lines laid outside habitation & in the open area/ field (2% Extra will be taken for the respective i/d of pipe). 2% of 28.15(E) (f). 28.18(b) 45.4 mtr 1738.24

b For pipe lines laid outside habitation & in the open area/ field (2% Extra will be taken for the respective i/d of pipe). 2% of 28.15(E) (f). 28.18(b) 57.4 mtr 1738.24

4 Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing, cost of nut bolts & rubber insertion all carriages complete.

a C.I Single air valve screwed (Size 50mm) (For 250mm, 200mm Dia HDPE Pipe) 28.29(d) 10 Each 2387.76 23878

5 Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.

a Supply & Jointing of 50 mm. Dia. G.I. Pipe (3 mtr for each ARV) 28.36 (A/C Slip -4) 30 mtr 685.24

6 Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge) (Class PN-1 as per ISI) (CSR 28.27 (A) )

a 200 mm i/d Sluice Valves flanged Each 2 Nos. 14467.73

b 250 mm i/d Sluice Valves flanged Each 2 Nos. 20973.48

c 300 mm i/d Sluice Valves flanged Each 1 Nos. 26271.54

7 Sub Total 8404168

8 Add 5.35% on CSR items as per A&C slip-5(B) { Except NS items} 449623

9 Amount (A) 8853791

10 Supply & Installation of Alfa-Alfa valve (with Anti Theft Mechanism)

a 200 mm. Dia.(Rate approved by DSWC) NS 17 Each 1593

b 250 mm. Dia.(Rate approved by DSWC) NS 17 Each 1856

11 Amount (B) 27081

12 Amount (A+B) 8880872

S. No. CSR 2020/NS Description Qty Unit Rate Add GST on work cont. as Total Rate Amount

1 Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m. 585.66 Cum 34 35.82

1.1 4.1 a Stone (building or pitching) Sand, Earth, Fly Ash, Bajri, Shingle, Spalls, Brick bats, Brick ballast and Stone metal. 131.88 Cum 19.48 20.52

1.2 29.7 B Extra for filling earth in 15 cm layers and compaction 131.88 Cum 52 54.78

2 10.11 (b) ii Cement Concrete 1:4:8 with stone aggregate 40mm gauge mixing mechanical means using concrete mixer volumentric type 30.33 Cum 3630 3824.21

3 Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. 72.6 Cum 5698 6002.84

4 10.22 Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure 52.09 Cum 6449 6794.02

5 Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete 78.25 Qtl 7920.15 - 7920.15

6 Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) 21 Sqm 210 221.24 4645.94

7 9.3 Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering) including attached pilasters, buttresses etc when curved. 297.67 Sqm 445 468.81

8 Waterproofing of wet areas ( Concrete/ Masonry Surface ) and any water retaining structures such as swimming pools, water tanks, Bathrooms, toilets, balconies, planters etc with high performance polymer modified cementitionous coating ( DR. FIXIT FASTFLEX / Equivalent ) to provide tough film build-up and highly elastic film formation, which accommodates thermal movements so as to provide seamless coating without any joints to prevents water leakage. The scope of work also includes surface preparation and cleaning, washing and removing dust, dirt and loose particles from concrete / masonry surface complete in all respects. 253.22 Sqm 504.51 531.5

9 18.4 Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position 26 Qtl 10848.57 10848.57

10 Applying priming coat with metal primer on new steel or iron work including preparation of surface. 128.83 Sqm 24 25.28

11 16.17 Painting two or more coats including priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade 128.83 Sqm 66 69.53

G. Total 2129414

D. Construction of Pump House

Sr No CSR 2020/NS Description of Items Qty Unit Rate (INR) Add GST on work cont. as per A & C Slip 5 Total Rate Amount (INR)

1 Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. 32.03 Cum 182 191.74 6141.43

2 Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth 10.84 Cum 5943.86 6261.86 67878.52

3 10.21 Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steelreinforcement centring and shuttering in superstructure. 13.49 Cum 6393.86 6735.93 90867.72

4 10.11 (b) ii Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type 5.97 Cum 4302.09 4532.25 27057.54

5 6.8 C (ii) Earth filling under floors with surplus soil containing more than 40% taking outside the premises in 15 cm layers including ramming watering and consolidated lead upto 1000 m 4.8 Cum 327 344.49 1653.57

5.1 10.26 Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded 3.88 Sqm 331 348.71 1352.99

6 Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete 22.8 Qtl 7920.15 7920.15 180579.42

7 Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering). 36.18 Sqm 210 221.24 8004.28

8 Centering and shuttering for columns (Square or rectangular or poly gonal in plain) 49.36 Sqm 477 502.52 24804.36

9 Centering and shuttering for sides and soffits of beam,beams, launching girders, bressumers, lintels. 30.84 Sqm 380 400.33 12346.18

10 9.8 Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. 39.45 Sqm 532 560.46 22110.23

11 11.6 (i) First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 meter above plinth level 14.5 Cum 5779.49 6088.69 88286.04

12 13.13 (i) Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing. 33.81 Sqm 720 758.52 25645.56

13 12.5 mm thick cement plaster 1:5 181.5 Sqm 189.91 200.07 36312.74

14 12.5 mm thick cement plaster 1:4 33.81 Sqm 197.91 208.5 7049.32

15 16.65 Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish 215.31 Sqm 80 84.28 18146.33

16 16.31 Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface 215.31 Sqm 21 22.12 4763.41

17 16.59 (A&C Slip-1) Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm 215.31 Sqm 120 126.42 27219.49

18 14.10 (A&C Slip-1) Conglomerate floor 50mm thick cement concrete rete 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material 24 Sqm 749 789.07 18937.72

19 14.3 (A&C Slip-1) Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm and 100mm sand filling using mechanical mixer for mixing of material 10.63 Sqm 403 424.56 4513.08

20 Floating coat of 1:5mm thick neat cement laid in one operation to the topping 24 Sqm 29 30.55 733.24

21 Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. 8.3 Mtr 232 244.41 2028.62

22 Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineerin- charge 4 No. 135 142.22 568.89

23 Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 2 Each 95 100.08 200.17

24 Khurra on roof as per item No. 13.43 with C.I. Spouts 100 mm dia fixed in position. 2 Each 127 133.79 267.59

25 14.137 (A&C Slip 2) Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge IS code :15658 (2006) 10.63 Sqm 645 679.51 7223.16

26 18.29 (a) Providing and fixing M.S. angle iron 40x40x6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect. (a)For single rebate. 26.25 Kg 89 93.76 2461.24

27 18.1 Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates including locking arrangement with handles etc. complete in respects 2.52 Sqm 3900 4108.65 10353.8

28 Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitered and electrically flashwelded, with iron fittings including necessary iron handles, hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazingand wire gauge) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire gauge and grill will be paid as per respective items) 140 Kg 128 134.85 18878.72

29 18.25 (b) Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. (b) Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area 8.82 Sqm 598 629.99 5556.54

30 18.27(A&C Slip 4) Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects. 8.82 Sqm 906 954.47 8418.43

31 Applying priming coat with metal primer on new steel or iron work including preparation of surface. 2.52 Sqm 24 25.28 63.72

32 16.17 Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade 2.52 Sqm 66 69.53 175.22

(A) SubTotal Amount 730599.3

E. Estimate for Cost of Pumping System Installation

Sr. No. CSR 2020/NS Description of items Unit Qty Rate (INR) Add GST on work cont. as per A & C Slip 5 Total Rate Amount (INR)

A Pumping set estimated cost:-

1 NS Providing, fitting & commissioning of ISI Mark Monoblock Non-clog pumpset with Panel Board, Fuse Box, Cable for connection from Pump to Panel within the pump Room for 5 MLD discharge and 27 Meter Head and power of 20 HP (as calculated in head loss sheet) (Non- Scheduled Item, cost considered as per market rate) (excluding the cost of Panel Board, Fuse Box, Cable ) self propeller motor Set 3 - 412765.5

2 NS Supply of powder coated MS Sheet frame Fabricated Control Panel consisting of Suitable Size VFD a semi conductor based motor starter to safety start & stop electric motors as well as fully control the speed of the motor during its operation further through control the supply voltage and frequency for the 20HP pump set. along with protection from voltage and current surges and suitable size MCCB composite complete in all respect as per relevant IS codes. Set 3 - 152220

2.1 NS Installation and commissioning of one no. pump with one number control panel at site. Set Job 3 - 33040

3 28.21 (d) Providing, cutting, Jointing and testing of C.I. Double Flanged pipes with casted flanged as per IS:7181, class-B (ISI marked with the prior approval of Engineer-in-charge), including cost of nut bolts and rubber insertion complete including all cartage.150 mm i/d (Total 30 mts for each pumpset i.e. total of 90 mtrs for 3 pumpset) for suction pipe from sump to pumping units & for delivery pipe manifold connecting all pumping units to HDPE pipe main line mts 90 3299.04 296913.6

4 28.8 (d) Extra for fixing of double flanged pipes in vertical position for over head reservoir & stand pipes, scaffolding, derricks, Jim poles, tools and plants, ropes, guys, etc. Complete as desired by Engineer-in-Charge.150mm i/d pipe lines laid complete (for suction pipes) mts 60 187.53

5 28.24(a) Supplying and laying C.I. specials suction pipe from sump to pumping units as per IS:1538 complete as desired by Engineer-in-Charge conforming to ISI specifications.. C.I. specials upto 300mm i/d .

a Bend on suction and delivery pipes (150mm i/d weighing 45 kg each) Total weight for 3 pumpsets 45x6=270 kg kg 270 77.99 82.16

b Flange (150mm i/d weighing 26 Kg each) Total weight for three pumpsets 26x10x3=780 Kg kg 780 77.99 82.16

c Tee (150x150 mm weighing 47 kg each) Total weight for 3 tees= 47x2=141kg kg 141 77.99 82.16

d One taper (150mmx200 mm weighing 51 kg each) 3x51=153 kg kg 153 77.99 82.16

e Blank Flange (150mm i/d weighing 11kg each) Total weight for 3 Pumpsets 11*6=66Kg kg 66 77.99 82.16

6 Providing & fixing C.I./D.I. Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). (A) Class PN-1 as per ISI (C) 150mm i/d Sluice Valve flanged

Total for 3 Pumpsets 1x3=3 Nos. Each 3 8914.18

7 28.29 (e) Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete € C.I. Single air valve screwed (Size 80mm)

Total for 3 Pumpsets 1x3=3 Nos. Each 3 4278.23 4507.12

8 28.31 (B) (d) Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete.

Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra. (B) Class PN-1.0 as per ISI with gunmetal flap (d) 150mm i/d Non return Valve

Total for 3 Pumpsets 1x3=3 Nos. Each 3 9197.42

9 28.96 (B) Jointing of C.I. Pipes as per IS:1536, Valves and specials with lead caulked joints ,including cost of lead , yarn and cost of labour fuel and tools etc with testing complete. For 150mm i/d pipe lines

Total for 3 Pumpset = 48 Nos. Each 48 1116.21

10 28.97 (C) Cutting of C.I. Pipes , specials and chipping

or filing the surface to a uniform finish. © 150mm i/d pipelines

Total for 3 Pumpsets =48 Nos. Each 48 71.25

11 Providing and fixing of Pressure switch of approved make in MS pipe line suitable for line pressure up 15kg/cm2 & including connection with main panel etc. as required complete in all respect

Total for 3 Pumpsets 1x3=3 Nos. Each 3 3799.27

12 28.131 (e) Providing and fixing in position Cast Iron Foot valves flanged ends with rubber sheet as per IS 4038 including cost of Nut Bolt , rubber insertion complete in all respect 150mm i/d Cast Iron Foot valves Each 3 6530.52 19591.56

13 28.121 (a) Providing and fixing S.S Pressure Gauge complete as required complete in all respect. ( a ) Dial diameter 150mm calibration 0-16 Kg Each 3 1027.61 1082.59 3247.77

14 28.128(c) Supplying, Laying, Testing and Commissioning of ISI marked BUTTERFLY VALVE PN 1.6, with Gun metal seal duly ISI marked complete with rubber insertion, nuts, bolts and washers, matching flanges of required thickness, etc. complete as per specifications. 150 mm i/d Each 5 5456.24

15 28.28 (a) Providing & fixing Fire Hydrants with jointing including all carriages complete (without Fire Hydrants surface box) Size 80mm complete in all respect. (a) C.I Fire Hydrants IS-908 Each 3 7133.17

16 Structural steel work in compound girders or Stanchions built up from two or more R.S. joists or channel section or plates & angles etc. including cutting and fixing all lattice bars, stiffeners, gusset plates, bolts, nuts, rivets, welding rod, etc. complete with flange plates, heads, sole plates, angle connections, etc. with hoisting and erecting in position

For suction pipe installing and dismantling 3 pumps Qtl 1.25 9394.28 9394.28 11742.85

Total 2437602.51

F. Electrical Estimate for Pump Room

Sr. No. CSR 2020/NS Description of items Unit Quantity Rate (INR) Add Premium as per A & C Slip 3 Total Rate Add GST on work cont. Total Rate Amount (INR)

1 34.02 RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-

I (a) Wiring fan point (Without fan box) Each 2 1091.69 2183.38

I (b) Wiring fan point (With fan box) Each 2 1210.21 2420.42

ii Wiring light point Each 10 762.47 7624.7

v Wiring 6Amp. Wall socket point Each 2 618.93 1237.86

vi Wiring 16/20 Amp. Power plug control point Each 1 478.03 478.03

2 34.09 PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

iii Overall size 2.5 sq. mm (Un-sheathed) Meter 100 36.98 3698

iv Overall size 4.0 sq. mm (Un-sheathed) Meter 100 53.41 5341

3 34.12 PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring urposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-

(x) Heavy Gauge PVC Conduit Pipe 25mm dia (Flushed) Meter 50 70.8 3540

4 34.13 (xiii) G.I.Earthing: Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling).

(a) Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 8Metre in length) Each 3 3315.89 9947.67

5 34.10 (B) XLPE INSULATED ARMOURED CABLES (LOOSE):- Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part- 1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-

xiii Overall size 95 sq mm (4 core) Armoured (Loose) Meter 200 538.6 107720

xxxvii Overall size 16 sq mm (4 core) Armoured (Loose) Meter 50 161.98 8099

6 34.16 (A) MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

ii MCB Single Pole 6-32 amp. (10kA, Curve-C) Each 6 190.58 1143.48

iii MCB Single Pole 40 amp. (10kA, Curve-C) Each 1 395.38 395.38

7 34.16 C RCCB's: Supply and erection of RCCB (Residual Current Circuit Breaker) for Earth leakage protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kA as per IEC 61008-1 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs

i RCCB Double Pole 16/25 amp. Sensitivity 30mA Each 1 1948.13 1948.13

8 SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's: Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-

ii SP&N Double Door Distribution Board 8 way each Each 1 1416.27 1416.27

9 CABLE TRAY: Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-

i Cable Tray Size 150mm X 50 mm X 50 mm (2mm thick) Meter 50 1066.35 53317.5

10 34.37 A (iv) Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1/2mtr. below ground level including excavation placing the pipe in position and back filling ith excavated soil etc. of the required size:- Double Walled Corrugated HDPE Pipe 120/103.5mm (Outer/ Inner dia.) Meter 200 290.77 58154

11 NS 1 LT PANEL Each 1 171563 171563

Design, supply, erection& commissioning of following distribution panels made of 2 mm thick CRCA steel sheets, Floor mounted, fully enclosed, compartmentalized, dust & vermin proof with hinged & lockable doors, & complete with earthing, painting as required and mounted with the following : (for detail specs refer technical specifications).

MCC Panel for 3nos 20 HP pump

SECTION-1 INCOMER

100Amp FP MCCB (50KA) DN2-250N 160-200

Thermal release with O/C, S/C ON/OFF/TRIP Block

Spreader Terminal Rotary Handle, CBCT with ELR:D2EFR1

Digital Mulfunction Meter RS485 PM130EH, CL:0.5

Digital Ammeter with ASS

Digital Voltmeterwith VSS

Metering CT 250/5, 10VA, Class-0.5 (Resin Cast)

ON/OFF/TRIP LED type Indicating Light

20 HP DOL STARTER (Separate compartment)

MPCB 14 to 20 Amps TP with 1NO+1NC Block

MOG-H1, Rotary type with external operating handle

Contractor MNX-32, 2NO+2NC, 230V AC

Over Current Relay (MPRD-2) with CTS 20 Amps

Auxillary Contractor 2NO+2NC 230V AC

Auto Mannual Selector Switch

ON/OFF Push Button

ON/OFF/TRIP LED Type Indicating light

MCB 6 Amps Double Pole

TRANSFORMER SECTION

Control Transformer 500VA 440/230V AC

MCB 6 Amps Double Pole

MCB 16 Amps Double Pole

Double Side Panel 2mm thickness CRCA Sheet

Alumminium Bus Bar HINDALCO make suitable for

100 Amps Load, 50 KA

12 NS 2 Supply and installation of Heavy Duty Exhaust fan 450mm with 1400rpm. Approved Make Crompton, Havells, Bajaj or equivalent Each 2 4855 9710

13 NS 3 Supply and installation of Led Tube light 20-22 watt with make of Phillips, Bajaj and Wipro. Item to include all amterial and lobour complete as per Specification and entire satisfaction of Engineer In Charge. Each 5 450 2250

14 NS 4 Supply and installation of Ceiling Fan 1200mm with Double ball bearing. Approved Make Crompton, Havelles, Bajaj or equivalent Each 2 2674 5348

Total Electrical Estimated Amount 457535.82

G. RCC Pipes on Sluice Valves

Sr. no. Item Description Units Qty Rate Amount

1 RCC Pipes (NP-2)

2 Total Amount (including GST 18%) 3165.04

3 Basic Amount (Without any Taxes) 2682.24