SPECIAL REPAIR TO OR MD ACCN BLOCK NO 71 ( QTR NO 1 TO 12) AT PATIRAM COLONY 1 TTR 1STC UNDER GE (WEST) JABALPUR

Amount

Taking down cement plaster / terrazzo, of any description and thickness including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L for 10mm thick rendering in cement mortar 1:6 on brick work or concrete internal surfaces, finished even and smooth without using extra cement complete all specified and as directed.

M&L 15mm thick rendering on concrete/brick external surfaces in CM 1:4 mixed with Water Proofing Compound(WPC) as per Manufacturer's instruction, finished even and fair complete all as specified and as directed. ( Note:- Liquid WPC will be measured and paid for separately as "Supply only")

Supply only liquid Water Proofing Compound (ISI Marked) as approved by GE complete all as specified and as directed.

M&L for preparing newly plastered surfaces of internal wall and applying two coats of oil emulsion distemper over and including 3 mm thick wall care putty on wall plastered surface complete all as specified and as directed.

M&L for preparing newly plastered surfaces of external walls and applying two coats of cement base paint over a coat of appropriate primer complete all as as specified and as directed.

M&L for complete removal of existing treatment & washing, rubbing down and stopping of distempered and painted surfaces including preparation of old undecorated surface of walls and applying two coats of cement base paint on external wall over a coat of appropriate primer complete all as specified and directed.

M&L for complete removal of existing treatment & washing, rubbing down and stopping of distempered and painted surfaces including preparation of old undecorated surface of walls and applying two coats of oil bound distempered over and including 2mm thick wall care putty on wall and a coat of appropriate primer complete all as specified and as directed.

M&L for prepration of old painted surfaces of steel of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F Expanded metal, nexc 4 Kg/sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel staples, supplied and fixed complete to wood or steel members complete all as specified and directed.

Dismantling Asbestos cement (corrugated , semicorrugated , etc.) sheets in roof coverings complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick (AZ-150) of any colour having tensile strenth of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick ( AZ-150), of any colour having tensile strenth 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.

Dismantling of wall and ceiling boards( fibre, pulp, insulation etc), any thickness including cover fillets complete all as specified and directed.

M&L for suspended false ceiling system using chicago metallic (E grid) exposed suspended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and thick wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) with provision of light fixture complete all as specified and directed. Make :- ARMSTRONG / EVEREST or other equivalent Make as approved by GE.

Dismantling timber fillets,posts, rafter, purlin under 40 sqcm in sectional area,complete all as specified and as directed.

Dismantling timber in scantling 40Sqcm and over in section, framed work, in any position complete all as specified and directed.

S&F mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410W (Gde-E-250),quality 'A' complete all as specified and directed.

S&F mild steel screw bolts (machine made)with hexagonal or square heads at one end and screw the other ,or screwed both ends each screw fitted with washers and one hexagonal or square nut, n exc 5 cm long, the dia of neck 5 to 10 mm complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screw the other ,or screwed both ends each screw fitted with washers and one hexagonal or square nut, exc 5 cm but n exc 10 cm long, the dia of neck 11 to 15 mm complete all as specified and directed.

S&F hand rails, half rounded or other steel section or core for wooden hand rail straight portion, drilled and counter sunk for balusters, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc,) including all necessary drilling bolting or riveting, etc and similar work conforming to Fe-290 (Gde E-165)complete all as specified and directed.

M&L for preparation of newly steel surfacces of any description not otherwise desribed, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide zinc chrome primer complete all as specified and as directed.

M&L for preparation of newly wooden surface of any description, over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of steel based surfacces of any description, n exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for preapring surfaces of wood and wood based materials,old surfaces of any description and girth,not otherwise described and treated with one coat of creosote oil complete all as specified and directed.

Dismantling brick work as in walls/parapet wall including removing grass, fungus, weed, roots of trees completely, grown on roof/wall surfaces complete all as specified and directed.

M&L for brick work with sub class ‘B’ brick, straight or curved on plan, exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with sub class ‘B’ brick, straight or curved on plan to any radius, in half brick thick walls, built in CM 1:4 complete all as specified and directed.

Dismantaling floor, hearth or wall tiling/china mosaic including cement mortar bedding (but not backing ) , removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm, 450x350 or 350x250 x 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile with & including rendering 10 mm thick in cement mortar (1:4), finished rough to fix tiles complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8mm thick, square/ rectangular, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc , set and jointed in neat cement slurry and pointed in white cement with pigment to match with the shade of tiles, laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular), area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles, laid over and including screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed..

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular), in vertical surfaces, area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, as in skirting ,dados etc, over and including 10mm thick cement plaster in CM(1:4) complete all as specified and directed.

M&L for granite (of any type ), 20 mm thick work (table rubbed and polished ) in steps ,jambs,pilllars,window cill,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2)using marble dust with admixture of pigment to match with shade of granite, laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for machine cut Cudappah stone slab on cooking platform/shelf, 20-25mm thick, laid over and including 20mm thick cement screed base in CM(1:6), and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for rounding to edges of granite stone slabs one edge such as in countertype WHB platform etc. complete all as specified and directed.

Demolition of cement concrete(unreinforced) in ground floor and paving, not exc 15cm in thickness (below or above ground level) complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C-2 using 40mm graded aggregate as in plinth protection, finishing even & fair without using extra cement, laid in bays with construction joints 6mm thick, filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,and weathering, slightly rounded or chamfered angles and throating, all as specified and as directed (Note :-Reinforcement where provided shall be measured and paid for separately)

Taking down chowkhats or frame (with shutter without taking off shutter from the frame), area not exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frame (with shutter without taking off shutter from the frame), area exc 1.5 Sqm but nexc 4 sqm each complete all as specified and directed.

Supplying and fixing pre-painted steel sliding window, 3- track (2 glass panel and 1 wire mesh panel), sliding window fabricated from roll formed sections, made of galvanised steel, cloloured, powder coated ( Base steel as per IS 513 'D' quality, galvanised as per IS 277 with zinc of 20 gm/Sqm) with total coated thickness 0.58mm, epoxy coated 5-7 micron thick, finish painted with a polyster paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyster powder up to 50-60 microns thick.Section of mesh should be of size- 35x49mm.The window should be paneled with 5mm thick plain float glass, corner bracket for internal and external frame made of glass filled nylon, EPDM Gasket . THe sections are to be cut to length,joined and assembled by means of corner bracket.The above frames should be fixed to concrete/masonry wall by means of self expanding screw complete all as specified and directed. ( Note : Glazing and wire mesh will be measured and paid for separately.)

S&F 18 mm Factory Made Solid PVC Moulded door shutters, with particle board core, for cupboard shutters, shelves ,kitchen cabinet etc complete all as specified and directed.

S&F continuous (piano) hinges,mild steel, bright finish or electrogalvanised, width of flaps 30 mm complete all as specified and directed.

S&F 125mm hasp and staples,aluminium anodized including bolt to hinge plate and fixed with screws complete all as specified and directed

S&F mild steel framed work conforming to Fe-290 (Gde E-165) , such as guard bars/grills/grating etc , with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chromate primer complete all as specified and directed.

S & F factory made 35 mm thick plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed.

S & F 35 mm thick 2nd class hardwood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc , size of members of shutters as specified in SSR Part -I,section 8,clause 8.24 (a), fitted to chowkhats for doors etc complete all as specified and as directed..

S&F PVC door frame, size 50mm x 47mm, made out of 5mm plain coloured PVC sheet, reinforced with MS square tube, supplying & fixing in opening as per specificationn complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails . MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width, stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails , lock rails and bottom rails on either side and as gap insert for top rail and bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S frame welded /sealed to the stiles & rails with suitable PVC sheet beading , and jointed together with solvent cement , supplying and fixing in the frame at site as per specification and drawing.

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed

S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.

S&F mild steel cold rolled medium weight butt hinges 100mm size fixed screws to wooden frames or with welding to steel frames complete all as specified and directed .

S&F, 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised, of size 150 mm complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised, of size 125 mm complete all as specified and directed.

S&F 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel spring complete all as specified and directed.

S&F 300mm long mild steel ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and directed.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and directed.

S&F framed work conforming to Fe-290 ( Gde E-165), as in doors or gates, of angle or other section with gusset plates ,rails,braces etc complete, drilled for fixing of steel gate sheeting or other covering,doors ,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,running rails and guides ) and hanging also, fastening and fixing complete all as specified and directed.

S&F MS Peg set of six, powder coated, as approved by GE, complete all as specified and directed.

M&L for Drapery rod, fancy type, mild steel pipe 25 mm dia with PVC coating fixed in the MS hooks and finials/side brackets (both side), shade as approved by GE complete all as specified and directed.

M&L for cutting holes in brick walls, exc half brick but nexc one brick, in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 using 20 mm graded crushed stone aggregate , complete all as specified and directed.

M&L for treating small article such as stops, covers, gully, gratings and hold fast ends & post, backs of chowkat etc with creosote oil, tarred area n exc 0.10 Sqm each complete all as specified and directed.

Taking down old steel tubing & connection including cleaning for refixing for 15mm bore pipe complete all as specified and directed.

Taking down old steel tubing & connection including cleaning for refixing for 20mm bore pipe complete all as specified and directed.

Taking down old steel tubing & connection including cleaning for refixing for 25mm bore pipe complete all as specified and directed.

S & F Tubes medium grade, 15mm bore galvanised with all fittings and fixed complete to wall (Conceiled)and ceiling or laid in floors complete all as specified and directed.

S&F Tubes medium grade, 20mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F Tubes medium grade, 25mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good to max with existing specifications , cutting not exc 10 cm in girth complete all as specified and directed.

S& F, in repair, Stop valve / Angle valve, fancy type, cast copper alloy, chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed.

S& F, in repair, 15 mm bore bib tap cast copper alloy, chromium plated, long body, fancy type with capstan headed, screwed down, screwed for iron pipe complete all as specified and directed.

S&F, in repair, for 15mm chromium plated brass WHB mixer, fancy type, swan neck, long nose, screwed down high pressure with or without lettered 'HOT' and 'COLD' and flynuts, 15 mm dia complete all as specified and directed.

S&F, in repair, fancy type, wall mixture of brass, chromium plated, 3 in 1 system with 'HOT' and 'COLD' arrangement, with provision for both hand shower & overhead shower complete all as specified and directed.

S&F, in repair, C P glass corner shelf, set of three single including screws and CP bracket complete all as specified and directed.

S&F, in repair, Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf, 12cm wide with chromium plated bracket guards and railing 600 mm long complete all as specified and directed.

S&F, in repair, stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union, overall Size 915mmx460mm with bowl size 410mm x330mm x 160mm complete all as specified and directed.

S&F, in repair, kitchen plate rack, made of stainless steel 1mm thick, complete size 1200 x 900mm x 200mm width, of trade pattern complete all as specified and directed.

S & F soap dish, stainless steel, approx size (160mm x 160mm x 90mm) complete all as specified and directed.

M&L for 32 mm bore Low Density Polyethelene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm fixed to walls or in floors etc complete all as specified and directed.

S&F, in repair, PVC connection 450 mm long, 15mm size with PTMT nuts complete all as specified and directed.

S&F, in repair, grating doom 125mm dia, PTMT with waste hole (Min weight 40 gm) complete all as specified and directed.

S& F, in repair, chromium plated shower rose 125 mm size and 15mm dia with or without swivel joints including fixing to pipe and union complete all as specified and directed

S&F, in repair, PVC Bath Cabinet made of hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size. Complete all as specified and directed. (Make- Prayag Cat Part No 554 or equivalent as approved by GE.)

S & F, in repair, Towel rail 600 mm long and 20 mm dia, brass chromium plated, D-type, fixed with screws and wooden or plastic cleats complete all as specified and directed.

S & F, in repair, towel ring, brass chromium plated, round type, fixed with screws and wooden or plastic cleats complete all as specified and directed.

S&F, in repair, vitreous China squatting pan of pattern Orissa Pan , size 580 x440 mm white with integral foot rests any pattern (excluding flushing cistern and flush pipe) complete and including provision of PCC bedding, connection to flush pipe , trap etc & making good the disturbed surface to match with existing specifications complete all as specified and directed.

S&F, in repair, 10 litre PVC valve less syphonic action type flushing cistern, low level, white with inlet ball valve, float and handle with flush pipe complete all as specified and directed.

S& F, in repair, vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall, with pedestal complete all as specified and directed.

S&F CP waste fittings, brass chromium plated, for sink , 32mm dia with long screws sinks and fly nuts , flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F CP waste fittings, brass chromium plated, for sink, 40mm dia with long screws sinks and fly nuts , flange end bedded in red lead cement and other in fixed all as specified and directed.

M&L for 75mm dia PTMT multi floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern ), including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store complete all as specified and directed.

S&F 110 mm dia PVC (SWR ) pipes, single socketed, in any length with rubber rings joints fixed to walls complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

S&F 110 mm dia PVC (SWR ) branch pieces,double (double Y), equal or unequal, with access door, rubber ring joints fixed to wall complete all as specified and as directed.

S&F 110 mm dia PVC (SWR ) bends, any radius, with access door complete all as specified and as directed.

S&F 75 mm dia PVC (SWR ) bends, any radius, with access door complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and directed.

M&L PVC(SWR) Tee of 110mm dia with access door etc complete all as specified and directed

M&L PVC(SWR) Tee of 75mm dia with access door etc complete all as specified and directed

S&F PVC (SWR) gully trap 125 x 110 mm, setting and jointing with solvent cement complete all as specified and directed.

S & F stack clamps, out of 50mm by 5mm flat iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore etc complete all as specified and directed.

Dismantling water tanks exc 250 litre but n exc 500 ltr capacity complete all as specified and directed.

S& F 500 litres, double layered, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I-2009 complete all as specified and directed.

S & F 20mm bore ball valve, high pressure, PTMT with epoxy coated aluminium rod & high density polyethylene float ball and fly nut, screwed for iron pipe complete all as specified and directed. ( Note : Minimum weight - 210 gm)

S&F 20mm dia gun metal,globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 25mm dia gun metal,globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking down carefully any type point wiring (light, fan, socket bell or power) , complete with fitting such as switches ceiling roses,lamp holders sockets,regulators,call bell light fitting with PVC conduit surface /concealed or wooden pattens including sunken cast iron /pressed steel terminal boxes etc complete all as specified and directed.

Taking down carefully Main switch and Distribution boards, any make and size, complete all as specified and directed..

Taking down the ceiling fan in situ and refixing after servicing, repairing and painting to ceiling fan including scratching old paint and preparation of surface for painting with one coat of white/grey enameled paint complete all as specified and directed.

Taking down carefully old unserviceable sub-main wiring, any type, with wooden batten/PVC surface conduit of any size complete all as specified and directed.

M & L for sub-main wiring two single core PVC insulated FRLS cable of size 6.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and one run of 6.0 Sqmm multistranded copper conductor cable as continuous earth wire complete and making good the disturbed surface to match with existing specifications complete all as specified and directed . (Note :-Two Nos of 6.0 Sqmm Wire and one No of 6.0 Sqmm Earth wire in One RM length and PVC conduit shall be measured as one unit length.)

M&L for sub-main wiring with two single core PVC insulated cable of size 4.0 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 20mm dia with all conduit fitting,fixing accessories and 4 Sqmm multistranded copper conductor cable as continuous earth wire and making good the disturbed surface to match with existing specifications complete all as specified and directed by Engineer in charge (Note :- Two Nos of 4 Sqmm Wire and One No of 4 Sqmm Earth wire in One RM length and PVC conduit shall be measured as one unit length.)

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of anti-corrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed by Engineer in charge.

One light point/Bell point controlled by one switch.

One fan point/Exhaust Fan point controlled by one switch.

One socket point controlled by one switch on same board.

One socket point controlled by one switch on Independent board.

Description all as per item No 118 above but with 1100 volts grade copper stranded conductor cable of size 2.5 Sqmm with 1.5 Sqmm solid copper conductor PVC for 3 pin switch socket outlet 15 Amp on independent board complete all as specified and directed by Engineer in charge .

M&L for bell push piano flush type AC 230 volts, 5 Amps, single pole, one way complete all as specified and directed by Engineer in charge.

S & F, in repair, for bell ding dong AC 230 volts, single pole, one way complete all as specified and directed by Engineer in charge.

S & F, in repair, for switch piano flush type AC 230 volts, 5 Amps, single pole one way complete all as specified and directed by Engineer in charge.

S & F, in repair, for Socket outlet 3 pin, 5 Amps and AC 230 volts, flush type complete all as specified and directed by Engineer in charge

S & F , in repair, for switch socket combination 3 pin 5 and 16 Amps, AC 230 volts, flush type complete all as specified and directed by Engineer in charge

S & F, in repair, for ceiling rose surface bakelite 65 mm x50 mm, three terminal, AC 230 volts, flush type complete all as specified and directed by Engineer in charge

S & F, in repair, fan regulator step type of polycarbonate complete all as specified and directed by Engineer in charge.

S & F, in repair, lamp holder, PVC Polycarbonate type body, with back plate for batten fitting with and including 9 watt LED lamp complete all as specified and as directed by Engineer in charge.

Supply and fixing, in replacement, decorative wall light fitting with and including lamp 9 Watt, made up of Polycarbonate , City-1 , Cylindrical shape , with LED lamp 9 Watt complete with fixing arrangements on wall all as specified and directed. (Make:City 1 of Havells or equivalent in Bajaj/Philips as approved by GE)

S & F, in repair, Smart bright Batten Series, LED luminaire using LED 22 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LED and delivers consistent light output, stable color, start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets complete all as specified and as directed. ( Make : Philips Cat part BN 021 LED 22S 6500/4000 PSU GR S1 or equivalent in Havells/ Wipro as approved by GE).

S & F, in repair, LED Decorative /mirror light fitting 9 watt along with fixture, surface mounted suitable for indoor application , connector block, etc . complete with all accessories, internally pre-wired and including round wood block, connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer in charge. Make- Surya Catpart No Visco SLEBT 10W or equivalent in PHILIPS/Havells as approved by GE)

S & F, in repair, Bulk head endura LED light fitting complete with and including 10 watt LED lamp and making necessary electric connection to ceiling rose with copper conductor of suiyable size & length complete all as specified & directed. (Make :- Surya Cat part No Corvi neo SLE BH10W or equivalent in PHILIPS/Havells as approved by GE)

Supply & fix LED Security Light Luminaire 25 Watt 6000K with high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base pole adapter,powder coated, pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed . (Make: Surya Cat part No SLEUL25WIP66 or equivalent in PHILIPS/Havells as approved by GE)

Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, metallic body complete with Metalic louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with PVC flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.

Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 250 mm sweep, Plastic body complete with louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with PVC flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.

S&F, in replacement, sheet metal enclosure distribution boards, double door factory made Vertical TPN 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB 100 amps and MCB SP 40 A-12 Nos circuits comprising of 3 phase 4 wire of suitable rating all as specified and directed.

S & F, in repair, Sheet metal enclosure DBs Single Pole and Neutral 8 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and directed by Engineer in charge

Supply and fixing, in replacement, MCB single pole and neutral , 240 volts, 40 Amps, 'B' Series complete all as specified and directed by Engineer in charge

Supply and fixing, in replacement, MCB single pole 240 volts, 6 Amp to 40 Amps, 'B' Series complete all as specified and directed by Engineer in charge

Supply & Fixing, in repair, single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel as shown in Electrical Plate No. 3 complete all as specified and directed including testing on completion including the material and labour for the followings : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) Reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

Supply & fixing electronic energy meter tamper proof, design digital technology, SINGLE phase 1 x 240 volts 50 HZ 0.4% basic current for direct connected meter and 0.2% of basic current for CT operated meter with LCD display class-1 accuracy as per IS : 13779 Microprocessor based single phase energy meter of 10-60 Amp complete with fixing accessories on finished wooden box complete all as specified & directed at site . Note :- 1. Old UNSV Meter shall be deposited to AGE E/M Store Yard 2. The New meter shall carry 5 year guarantee.

Supply , laying and testing cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cables ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 3.5 core 35 Sqmm including taking out old unserviceable cable complete all as specified and directed by Engineer in charge

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth , for foundation, etc or for shafts, wells, cesspits, manholes, pier holes,etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and as directed.

M&L for returning , filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

M&L for removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

Supply and spreading clean and dry fine sand free from sharp materials (unwashed) laying in trenches around the cable for cushioning in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness complete all as specified and as directed. (Note :- Punned thickness shall be measured.)

Supply and laying brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class ‘B’ bricks laid dry flat complete all as specified and directed by Engr in charge.

M&L for GI Tubes,of size 40 mm dia light grade, galvanised, with all fitting , laid in trenches for protection of cable in road /drain crossing complete all as specified and as directed.

Schedule of credit amount of Rs. 158230.00 to be deducted during AOC

SUBHASH CHNADRA RAI

RAVI ENTERPRISES

Tiki Water proofing Co