Construction of Storm Water Drain at Sengadu in ward no 49

Amount

Earth work excavation in all kinds of soil including sand, silt, wet sand under water, black cotton, stiff black cotton, clay, hard stiff clay, hard red earth, murram, stoney earth, gravel and shales etc. excepting all kinds of rock and boulders exceeding 0.014 c.u.m. in volume including rough dressing and dumping the excavated materials away from work site manually within 50m initial lead and 2m initial lift as per the direction of Engineer-in-charge. departmental officers etc complete

Conveying the excavated earth from the site to the distance of 15kms out side of the city limit including all initial lead, lift, loading and unloading with transportation charges etc complete as per the direction of departmental officers.

Cement concrete 1:4:8 (one cement, four sand and eight aggregate) using 40mm hardbroken granite stone jelly for foundationincluding dewatering if found necessary andlaid in layers of not more than 15 cm thickand compacted etc.,complete

Supplying and erecting SHUTTTERING including necessary supports for plane surfaces such as Drain walls etc, using mild steel sheets of size 90cm X 60Cm and BG 10 stiffened with welded mild steel angles for boarding supported by Casuarinas props at suitable intervals etc., complete complying with standard specification and as directed.

Cement concrete 1:3:6 (one cement, three sand and six aggregate ) using 20mm hard broken granite stone jelly for all CC items of work excluding centering, shuttering, and cost of reinforcement grill but including curing finishing etc., complete fixtures in CC works wherever necessary as directed by departmental officer etc., complete.

PLASTERING with cement mortar 1:5(one cement and five sand by volume) 12mm thick for all internal/external surfaces complying with standard specifications.

Supplying, fabricating and placing in position TMT/CTD rods for all RCC works including cost of steel and binding wire also in all floors complete complying with standard specification

RCC non pressure spun pipe with socket and spigot ends as per IS 458/2003 manufactured with sulphate resistant cement with 12 mm HI -alumina lining with rubber ring joints.(NP3 Class) ,Lowering RCC pipes and specials into the trenches and laying to proper grade and alignment and Jointing RCC pipes with cement using necessary collars including the cost of jointing materials.complete complying with standard specification

Reinforced Cement concrete 1:2 :4 (one cement, two M Sand & four course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete. (RCC Works)

Supply and manufacturing of RCC Precast Slab 75mm thick in CC 1:2:4 mix using 20mm broken jelly including water curing, moulding, charges etc., complete as per the direction of departmental officers

Hoisting of RCC precast slab 75mm thick jonting and water curing etc complete.,

Add :- GST @ 18%

SS ENGINEERRS (BID ID -1234331)