Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹5.7 L
EMD Value
₹11,386
Closing Date
20 Jan 2026, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer PRI NMA Mayabunder
Office of Executive Engineer PRI NMA Mayabunder
Repairing and maintenance of Pay and Use Toilet Block at Mohanpur ward No. 02 under Gram Panchayat, Kishorinagar.
2026_RDPRI_21457_1
171/EE/PRI/NMA/MB/25-2026
Open Tender
Civil Works - Buildings
Works
90 days
Kishorinagar
Refer Tender Document
5 documents required · 5 mandatory
₹500
Executive Engineer PRI NMA Mayabunder
₹11,386
20 Jan 2026
13 Jan 2026
20 Jan 2026
13 Jan 2026
20 Jan 2026
13 Jan 2026
With cement mortar 1:4 (1 cement : 4 fine sand)
Nominal concrete 1:3:6 or richer mix (including equivalent design mix)
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)
Foundations, footings, bases of columns, etc. for mass concrete
Ridges plain (500 - 600mm)
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
Dismantling wooden ballies in posts and struts including stacking within 50metres lead.
Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.
1:4 (1 Cement : 4 Fine sand)
Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately).
6 mm thick Cement fiber board as per IS: 14862
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
15 mm nominal dia Pipes
20 mm nominal dia Pipes
20 mm nominal bore
15 mm nominal bore
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 Palverised sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick stone aggregate 40 mm nominal size, well rammed and consolidated and grouted with Pulverised sand including necessary excavation, levelling & dressing & finishing the top smooth.
23 x 23cm Surface drain.
Providing and Fixing in position eves or facia board with 18 mm thick wood plastic composite board of 30cm wide including fixing to wooden frame wherever necessary, all complete as directed as directed by Engineer-in-charge.
ELECTRICAL WORKS
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC Conduit, with piano type switch, suitable size PVC box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
Group C
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
Supplying of prewired LED tube light T5 20W/22W (MAKE INTENSO LXS BATTEN 4 FEET 20 W) (Make: Havells'Polycab/Crompton) or Equivalent to ISI Standarad.
Installation, testing and commissioning of pre-wired, LED FITING of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
6 way, Double door
Single Pole MCB
40 Amps, 2 Pole Isolator
Supplying and fixing brass batten/ angle holder including connection etc. as required.
Supplying of LED Lamp 9W (Make: Bajaj/ Havells /Usha /Orient/Crompton or equivalent to ISI standard)
Supplying and fixing rewirable porceline with fuse unit of 32 to 40 amps on energy meter board.
Supplying and fixing of Wooden meter board of Size 10" X 12" for fixing of Energy meter or equivalent to ISI standarad.
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.45 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.88 MB
NIT171GPKishorngar.pdf
Tender Documents • 3.21 MB
BOQ_22694.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .