Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.1 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹17.9 L+₹47,504 (2.73%)Rejected-AOC | L2 | Rejected-AOC Being other than L1 | |
| 3 | L3₹20.2 L+₹2.8 L (16.1%)Rejected-AOC C 89 CECC VILL POST PATHOLI AGRA UP | AGRA | AGRA | UTTAR PRADESH | 283105 | L3 | Rejected-AOC Being other than L1 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
2 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST AGRA
GE East Agra, Military Engineer Services, Gwalior House, 62 Taj Road Agra Cantt 282001
REPAIR TO JOINERY , ROLLING SHUTTERS, GLASS PANNELS AND CONNECTED ITEMS IN OTM ACCN ETC UNDER AREA OF AGE B/R-II OF GE(EAST) AGRA
2022_MES_528384_1
9461/E8
Open Tender
Civil Works
Item Rate
180 days
AGRA
Please refer tender documents
9 documents required · 9 mandatory
₹500
Yes
GE EAST AGRA
₹40,000
Yes
8 Aug 2022
3 Jun 2022
12 Jul 2022
3 Jun 2022
2 Jul 2022
17 Jun 2022
Amount
Taking down chowkats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 sqm each complete all as specified and directed.
Taking down chowkats or frame with shutter (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and directed.
Taking down shutter exc 1 Sqm and not exc 2.00 Sqm each complete all as specified and directed.
Taking down shutter of any description of size exc. 1.0 Sqm but n.exc. 2.0 Sqm each and refixing in same opening after easing and refitting complete all as specified and directed.
M&L Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete all as specified and directed., drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete, quality conforming grade Fe- 290 or E- 165 complete all as specified and directed.
S&F Factory made flush shutter 35 mm thick solid core construction with particle board core and plywood face panels commercial type complete all as specified and directed.
S & F 35mm thick, factory made , llnd class hard wood (Sal) glazed and skeleton shutter open rebated and prepared to receive glass, gauze, etc. (with out sash bars), edges of framing plain, charmfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part l, section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.
Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 176 of SSR 2020 (Part-II).
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm PVC wood grain coloured sheet and reinforced with MS square tube, as shown on drawings as per manufacturers specification complete all as specified and directed.
S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed..
S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.
S&F Aluminium alloy, anodised, 250 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F Mild steel butt hinge medium weight cold rolled of size 100mm long and fixed with screw/ welding complete all as specified and directed.
S&F 100 mm long stainless steel hinges type B-12 and fixed with screw/ welding complete all as specified and directed.
S&F 150mm long aluminium anodized handle cast type complete all as specified and directed.
M&L 100mm long aluminium anodized handle cast type complete all as specified and directed.
S&F Floor door stopper 150mm long of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor complete all specified and directed.
M&L Factory made steel window, with side hung shutters including box type hinge with steel handle made of Z section 125mm long 01 No. in each leaf and 100mm MS tower bolt 02 Nos in each leaf and steel peg stay and tie rod of 10mm dia complete with glazing bars, decorative or welded complete all specified and directed.
M&L Factory made steel window, with side hung shutters including prijecting type hinge with steel handle made of Z section 125mm long 01 No. in each leaf and 100mm MS tower bolt 02 Nos in each leaf complete without glazing bars, decorative or welded complete all specified and directed.
M&L Factory made steel ventilator, with top hung shutters including box type hinge with steel peg stay, complete all specified and directed.
M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S & F galvanized mild steel wire cloth 0.40 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
M&L for 1.00mm thick mild steel black sheet as in steel gate and similar works cut to size, holes punched including round headed screw welded etc complete as specified and as directed.
M&L in repairs for 1.00mm thick mild steel black sheet as in steel gate and similar works cut to size, holes punched including round headed screw welded etc complete as specified and as directed.
S & F 300 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed.
M&L for mild steel barrel tower bolt stove enamelled black with bright bolt and fixed 200mm size . complete all as specified and directed.
M&L for mild steel pressed handle oval type stove enamelled black 150mm size .complete all as specified and directed.
M&L Welding in repairs n.exc 2.5 cm in length and n. exc 6mm thick complete all as specified and directed.
M&L Welding in repair exc 2.5 cm but n.exc 5.0 cm length and n exc 6mm thick complete all as specified and directed.
S&F in repairs Galvanised mild steel wire cloth, 0.40mm nominal dia or wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples/ wooden beads complete all as specified and directed.
S&F in repairs mild steel PVC coated drapery rods, 25mm internal diameter including decoratine type brackets and PVC curtain rings 8 Nos per RM including fixing arrangement with drilling holes in walls, brackets etc complete all as specified and directed.
Hacking out old broken glass (any thickness, size quality or description) from wooden or metal frames, glazed with putty or fixed with beads etc complete all as specified and directed.
S&F 3 mm thick sheet glass ordinary quantity and glazing with oil putty in square not exceeding 0.5 Sqm in each panel complete all as specified and directed.
S&F 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.
S&F 4 mm thick Figured glass, pin headed type and glazing with glazing clips in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.
M&L applying Two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer including preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth complete all as specified and directed.
M&L applying Two coats of synthetic enamel paint (Ordinary tint) over a coat of red oxide primer including preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth complete all as specified and directed.
M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding of hold fast etc including making good all disturbed surfase of existing position complete all as specified and directed.
M&L Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
M&L for fixing in repair Floor spring for alumium door etc complete all as specified and directed.
M&L for fixing in repair mortice lock device complete with double keys for each lock in aluminium door etc complete all as specified and directed.
S & F in repairs 5mm thick sheet glass in aluminium door/ window etc complete all as specified and directed.
S & F in repairs rubber gasket for aluminium door and window complete all as specified and directed.
S & F in repairs aluminium beading of suitable size for fixing sheet glas in aluminium door and window complete all as specified and directed.
S&F anodized aluminium door & frame 2mm thick incl- 5.00mm thick tinted glass in half portion and in other half portion 12 mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination complete and fixed with anodized aluminium snap beading, glazing clips, joining clips, screws and 02 Nos of aluminium handle on each door shutter, aluminium anodized tower bolt 200mm long 02 Nos on each shutter and mortice lock device complete with double keys for each lock, 01 No Hydrolic door closer for each shutter complete all as specified and directed with following specifications:- (a) Aluminium door frame = 101.50x44.45mm (b) Aluminium style/top & middle rails of shutter = 83.5x44.45mm (c) Aluminium bottom rail of shutter = 114.50x44.45mm (d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed
S & F Anodised aluminium three track sliding window made of extruded profiles with reqd size of aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and plain glass on two shutters and aluminium wire cloth on one shutters with two nylon roller on each shutters including star lock handle complete all as specified and directed.
S & F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.complete all as specified and directed.
S & F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed
S&F aluminium anodised grill (DG 104) 10mm x 5.2mm thick on Deco grill or equivalent fixed with 'F' section approved make complete all as specified and directed.
S&F in repirs 12 mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination complete and fixed with anodized aluminium snap beading, glazing clips, joining clips in aluminium door/ window/ partition etc complete all as specified and directed.
S & F in repair cast iron Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in widthand of weight between 61 to 80 kg and fixed complete all as specified and directed.
Taking down and refxing of aluminium shutter in the same position after repairing and making it smooth functional including replacement of unserviceable top pivot and adjustment of floor door stopper (size of shutter n.exc 2.50 sqm each) complete all as specified and directed.
Taking down rolling shutters and re-fixing to its original position after cleaning all parts, straightening rails, changing damaged strips, bottom rail,guide rail, helical spring as required, greasing, oiling, servicing for smooth functioning of all parts completed all as directed for the following sizes :- (a) Area of rolling shutter n exc 10 sqm Each Note: Lath strips, bottom rail, spring, gears, guide rail etc. will be measured and paid seperately as supply only
Taking down rolling shutters and re-fixing to its original position after cleaning all parts, straightening rails, changing damaged strips, bottom rail,guide rail, helical spring as required, greasing, oiling, servicing for smooth functioning of all parts completed all as directed for the following sizes :- (a) Area of rolling shutter exc 10 sqm and n exc 20 sqm Each Note: Lath strips, bottom rail, spring, gears, guide rail etc. will be measured and paid seperately as supply only
Supply only mild steel spring made out of 6mm to 11mm dia high tension steel wire confirming to IS 4454 having 65 to 100 helical for rolling shutter for smooth working condition (dia of spring 100mm to 150mm)complete all as specified and directed
S&F in repair gear box for rolling shutter made out of 1mm thick mild steel sheet including painting with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
Supply only 75mm wide laths strips 1mm thick for rolling shutter including mild steel clips at either ends duly painted with and including two coats of synthetic enamel paint (shades to match with the existing) over a coat of red oxide primer complete all as specified and directed.
Supply only mild steel bottom rail lock plate with two handles 150mm wide and 3mm thick including necessary locking arrangement on both sides and painting to bottom rail with and including two coats of synthetic enamel paint to match with existing over a coat of red oxide primer complete all as specified & directed.
S&F in repair Ball bearing for rolling shutters complete all as specified and directed .
Supply only 65 to 75mm wide guide rail, 3mm thick suitable for rolling shutter complete all as specified and directed.
S&F in repair steel rolling shutters,1 mm lath thickness with ball bearing,as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, gear operated type with bevel gear box and crank handle complete all as specified and directed.
S & F in repir of 1mm thick top cover galvanized iron sheet for steel rolling shutters complete all as specified and directed.
M/S OMKAR SINGH YADAV
C P Singh and Co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .