HEIGHTING OF BOUNDARY WALL BEHIND CHETAH BLOCK ALONG 200 MTS PARALLEL TO THE RAILWAY TRACK OF FAE UNDER GE MCEME SECUNDERABAD

Amount

Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth for foundation of footing/wall, laying of cable etc. and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter Fair finished surfaces of concrete flat complete all as specified and directed.

M&L For RCC 1:1.5:3 using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete etc. complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns, and stanchions fair finished surfaces complete all as specified and directed.

M&L For RCC 1:1.5:3 using 20mm graded stone aggregate as in Columns and piers etc. complete all as specified and directed.

M&L For RCC 1:1.5:3 using 20mm graded stone aggregate as in lintel band/Beams complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 complete all as specified and directed.

M&l for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in coping including necessary form work and finishing exposed concrete surfaces fair and even and weathering, slightly rounded or chamfered angle and throating complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending sprially for columns, hooks ends and binding with Mild steel wire (annealled) not less than 0.90mm dia (or) securing with clips complete all as specified and directed.

All as per item No. 12 above but 8mm dia and over upto and including 10mm dia in stirrups spaces and bendings complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for applying Two coats of cement base paint over a coat of primer including preparation of newly plastered surfaces complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying two coats of cement base paint complete all as specified and directed.

S&F mild steel work as in fencing posts and struts including cutting tops to shape as directed, drilling holes, nothcing for wire etc, flat iron fillets for securing wire mesh etc including neessary drilling, bolting or rivetting etc and similar work confrming to FE 290 Gde E 165 complete all as specified and directed.

M&L for two coats of synthetic enamel paint including preparation of new steel surfaces embedded in concrete exceeding 10cm in width or girth complete all as specified and directed.

Demolition of brick work of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

Ditto as per Item No. 21 above but except stones

Demolition of stone/boulder masonry any description and in any position not otherwise specifically provided for complete all as specified and directed.

S&F in repairs Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured) complete all as specified and as directed

Material and labour stainless steel 304 grade Concertina punched tape coil of 610mm dia strechable to 6m long, minimum 6 spirals per running meter of coil, made out of SS-304, 2.5 mm thick hard coil (+/-0.05 mm) having blade of SS-304, size 0.50mm thick (+/-0.05mm), barb length of 10 mm, bard width of 13 mm, barb spacing not exceeding 26 mm and clips made of SS-304,complete all as specified and directed.

Supply and fix LED energy efficient security light fitting of capacity of 45 W including GI pipe bracket of 40mm dia, 1.2m long including clamps,nuts and bolts etc for fixing the light on wall complete all as specified and directed. Make:- Havells/C&S/Philips/Wipro

Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables, heavy duty with aluminium conductor of cross sectional area 06 sqmm 4 core with all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. (NOTE: Earthwork & Excavation, GI pipe brick protection etc shall be measured and paid separately under relevant items of this schedule 'A' part) complete all as specified and directed.

S & F hot press moulded SMC junction/ terminal box of size with internal diamentions of 200x140x95 mm with hinged door, incl of 2 way connector 415 V made out of polycarbonate and provosion for fixing of 1 No MCB SP of 6 Amps with DIN bar, drilling hole for cable connections, connecting incomming and out going cable by providing suitable size of cable lugs/ glands, fixing on wallby means of clamp made out of MS flat iron of size 25x3 mm with all fixing arrengement complete all as specified and directed. Make:- Sintex/Havells/C&S/L&T Note :- MCB SP will be measured and paid seperately.

Supply and fix in repair MCB SP C series 6 Amps 240 volts for fixing on item No. 28 complete all as specified and directed.

S & F in replacement PVC insulated and unsheathed (ISI marked) stranded copper conductor 1.5 Sqmm size, 3 core round cable for security light connection from light fitting connector to the terminal box including PVC conduit of suitable size all fixing arrangement complete all as specified and directed.

Supply, spread approved sand in cable trenches providing for cable cushioning as directed. NOTE :- Punned thickness of sand only will be measured and paid.

Supply and lay PCC cable covers for LT cable protection, Class LV, Type 1 of size 250x150x40mm complete all as specified and directed.

M&L for 20 mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to using galvanised iron strip 25×4mm as earthing lead drawn through and including GI protection pipe of light grade 40 mm bore by means of bolts, nuts, checknuts and washers all as shown in Electrical Plate No.3 of SSR Part-I and connected to main switch board including excavation and earth work, PCC chamber in 1:3:6, RCC Cover in 1:2:4 type B-1 reinforced with 8 mm dia MS bars at 10 cm c/c, 20 mm dia medium grade GI pipe with funnel and wire mesh complete and watering arrangement all as specified. (Note: GI pipe 40mm dia, galvanised iron strip 25×4mm upto 7.5m deemed to be included in quoted rate.) complete all as specified and directed.

Supply and fixing Security Light control panel complete with digital timer 24hrs, contactor, MCB TPN 40 Amp to be fixed on wall/pole including fixing arrangement such as clamps, nuts, bolts etc complete all as specified and directed. Make:- Havells HSN Code 8537, SAP Code IHXTS03060 or equivalent in Schneider/C&S/L&T Note :- MCB TPN, contactor,& timer are deemed to be included in the quoted rate.

c devender reddy and co

SAI RUPA CONSTRUCTIONS

A SOMA RAJU

Himagiri Constructions

SN POWER TECH

K LAKSHMAN SINGH AND CO

STANDARD AGENCIES