SPL REPAIR TO BLDG NO P-274 (JCOS LIVING ACCN) AND CATTLE FENCING IN NEW DEFENCE COLONY AND CERTAIN OTHER SANCTIONED WORK OF AGR BR-I UNDER GE (EAST) LUCKNOW

Amount

Taking down chowkhats or frame area not exc. 1.5 Sqm each with shutters including iron mongery (without taking off shutters from the frame) and taken as credit complete all as specified and directed.

Taking down chowkhats or frame area exc 1.5 sqm and not exc 4 sqm each with shutters including iron mongery (without taking off shutters from the frame) and taken as credit complete all as specified and directed .

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down shutters area exc 1 sqm but not exc. 2 sqm each complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) of any section including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling boarding any description fixed any postion with nails complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as specified and directed.

Excavating in trenches not exc 1.5 m width and not exc 1.5 m in depth for foundation etc or for shafts, wells,cesspits , manholes , pier holes etc not exc 10 sqm on plan and not exc 1.5 m in depth and getting out hard/dense soil complete all as specified and directed.

Removing excavated material exc 250 m but not exc 500 m distance and depositing as directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Returning filling in ,including spreading ,levelling,watering and well ramming in layers n exc 25 cm soft/ loose soil complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in posts etc complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specidied and directed.

M&L MS work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

Supply chain link MS galvanised fencing any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh, size and type to any type of standards, rails, straining bolt etc including provision of binding wire complete all as specified and directed.

S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of posts including tying at crossing with and provision of galvanised mild steel wire complete all as specified and directed.

Supply only mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed at other fitted with washer and nut 5 to 10 mm dia and 50cm long complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, platform, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick laid and pointed over 20mm thick screed bed in CM 1:4 and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F pressed steel frames of size 165x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed .

S&F Pressed steel frames of size - 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels,commercial type on both sides etc all as specified and directed.

S&F 100 mm size butt hinges, stainless steel medium weight, cold rolled complete all as specified and directed.

S&F 2nd class hard wood, 35mm thick factory made plain framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as complete all as specified and directed.

S&F factory made 35mm thick glazed and skelton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified and directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L 15 mm thick rendering in cm 1:4 on fair surfaces of walls finished even and smooth without using extra cement with WPC @ 3% complete all as specified and directed. (Note:- WPC shall be measured and paid seperately . )

M&L for 15 mm thick rendering in CM 1.4 on brick work or concrete surface of wall finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick rendering in CM 1.6 on brick work or concrete surface of wall finished surface even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Demolition of brick work or stone/boulder masonary, built in cement motar or cement lime motar incl all quoins,arches,pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles etc. complete all as specified and directed.

M&L for brickwork with flyash bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 etc. complete all as specified and directed.

M&L for brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 etc all as specified and directed.

M&L for preparation of new plastered surface of wall and applying three coats of white wash on wall complete all as specified and directed.

Complete removal of existing treatment and applying two coats of white wash on ceiling including preparation of surface complete all as specified and directed.

Complete removal of existing treatment and applying two coats of white wash on wall including preparation of surface complete all as specified and directed.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efforescent salts, trading oil, greasy sopts etc and preparation of plastered surfaces and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer over & including 2-3 mm thick white wall care putty on walls complete all as specified and directed.

M&L for 1mm thick wall care putty on wall/ceiling etc. complete all as specified and directed.

S&F steel window or ventilator fixed type with glazing bars complete all specified and directed.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in wooden door with beading Ist class and steel window with using flat iron complete all as specified and directed.

S&F in repair sheet glass 4 mm thick ordinary quality and glazing with oil putty area not exc 0.50 sqm in each pane complete all as specified and directed .

S&F 3 mm thick figured glass pin head type and glazing in steel /wooden window in squares area not exc. 0.50 sqm in each pane complete all as specified and directed

S&F sheet glass 4mm thick glass is grounded or abscured or frosted, on one side complete all as specified and directed.

S&F 300 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F 200 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

M&L for mild steel work as in hold fasts, bands, plain angle cleats, clamps, hooks, straps, stay for rain water pipe, pintle hinge, large hasp and staple, clamps conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm thick made out of 5mm thick plain colour PVC sheet reinforced with M.S Sqare tube, single side prelam PVC sheet used instead of plain colour PVC sheet edges will be painted to match with prelam sheet complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles beading, and joined to gether with solvent cement, suppling and fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F 5mm thick PVC sheet fillet with 35mm thick for wall panelling inclusive of fixing on to wall make PVC frame as per specification and drawing complete all as specified and directed.

S&F solid PVC wall linning, consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixed at site on PVC frame complete all as specified and directed.

S&F GI frame for seamless ceiling comprising of Gl perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall LIsing 'nylon sleeves and screws at 450mm centre to centrel intemediate channel 0.9mm thick having two equal fianges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.20m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate shannel at 457mm centre to centre and hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long complete all as specified including 10mm thick POP (Gypsum anhydrous) to flat surface over metal frame work and reinforced with GI wire mesh at different hight or level to provide seamless finish including two coats of plastic emulsion paint over one coat of primer complete all as specified and directed.

S&F 100 to 150 mm wide POP moulded/cornices (seamless) in required pattern/design as in ceiling complete all as specified and directed.

S&F moulding ceiling ring 600mm dia in required pattern/design complete all as specified and directed.

S&F false ceiling with 4mm thick E-coard 'Everest' make white prelaminated embosed reinforced designer ceiling board of approved texure fixed with Gl imposed grid frame work of size not more than 600x600mm having 24mm wide T-section runner made of 0.33mm GI sheet and angle made of 0.45mm. GI sheet suspected with 4mm dia GI wire including two coats of plastic emulsion paint over one coat primer complete all as specified and directed .( Note :- All exposed surface of grid work shall be powder coated white.)

S&F in repair 4mm thick asbestos cement plain building boards, fixed to timber frame work with screw etc complete all as specified and directed.

M&L for preparing of new surfaces of wood or wood based material exc 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing of old surfaces of wood or wood based material exc 10 cm width or girth & applying one coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces on wall and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces on wall and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of plastic emulsion paint over a coat of primer etc complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and applying two coats of plastic emulsion paint over a coat of primer etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete of mosaic floor and paving not exc. 15 cm thickness (below or above ground level ) complete all as specified and directed

M&L for non skid coloured ceramic tiles 7 to 8 mm thick(square/rectanglar) area of each tiles exc.0.11 sqm but not exc 0.18 sqm in floor over and including 20 mm thick screed bed or beding layer for laying floor finishes CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed

M&L for non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc.0.18 sqm but not exc 0.36 sqm, in floors over and including 15 mm thick screed bed in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed

M&L for vitrified coloured ceramic tiles 10 mm thick(square/ rectanglar) polished area of each tile not exc 0.36 sqm in floor etc. over and including 15mm thick screed bed or beding layer for laying floor finishes in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed .

M&L for vitrified coloured ceramic tiles 10mm thick (square/rectangular), polished area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick cement plaster in CM (1:4) etc complete all as specified and directed .

M&L for glazed coloured ceramic tiles 450x350x7-8 /450 x 300 x 7-8/600x300x7-8 mm thick but as on vertical surfaces such as skerting / dado & riser to steps including 15 mm thick rendering in CM 1:4 complete all as specified and directed

S&F in repair vitreous china wash hand basin, white, flat back of size 600x480mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified and directed

S&F in repair coloured (wooden finish) viterious china WC (ET) wall mounted with E dual flushing cistern incl all necessary fitting such as flush pipe waste pipe fixed as in repair of approvad shade complete all as specified and directed .(Make Parryware/Aquarries range Hi-Lites Code No C0235,C0715,C2016.CC8080 or equivalent)

S&F in repair viterious china coloured WHB 600 x 480 mm counter top oval shape E cascade pattern with pillar taps (Cat part No 51011 of Jaquar),cast copper alloy capstan heads CP PVC connection. CP bottle trap (Cat part No 569 of Jaquar )and CP waste coupling 32mm dia complete all as specified and directed.

S&F in repair of 15mm pillar tap, cast copper alloy with capstan head, chormium plated, screwed down high pressure with or without lettered 'Hot'or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

Taking up or down steel tubing and connections 15 mm bore including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore including cleaning for refixing or removal to store complete all as specified and directed.

Cutting chases, pinning in brick walls, making good to facing where required and painted in cement mortar 1:3 to edges of landings steps, cills, sun sheds, shelves, lintels etc and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F 15 mm bore galvanised steel water tubing "medium grade" with all fittings & fixed complete to wall and ceilings or laid in floor complete all as specified and directed.

S&F 20 mm bore galvanised steel water tubing "medium grade" with all fittings & fixed complete to wall and ceilings or laid in floor complete all as specified and directed.

S&F in repair stop cock (Angle valve) 15mm dia cast copper alloy screw down pipe pressure with crutch or butterfly handle scrwed both ends for iron pipe or union complete all as specified and directed.

S&F in repair bib tap for 15 mm bore pipe cast copper alloy chromium plate with crutch or butterfly handle,screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair bib tap 15mm dia long body.chromium plated, fancy type complete all as specified and directed.

S&F in repair CP soap dish holder any type fixed to plugs with chromium plated brass screws complete all as specified and directed..

M&L 18-20 mm thick granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shed of granite stone including griding and polishing types incl 15 mm thick screed bed with CM (1:6) etc all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc all as specified and directed.

S&F in repair health faucet for EWC CP hand hold with flexible pipe complete set complete all as specified and directed.

S&F in repair 15mm dia CP two way tap consisting angle valve to control water suitable for jet cleaner complete all as specified and directed .

S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, Jet spray including PVC connection 600 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple, complete all as specified & as directed.

S&F in repair PVC valveless, syphonic action type 10 ltrs capacity flushing cistern low level white with inlet, ball valve float and handle including brackets complete all as specified & directed.

S&F PVC connection for 15 mm bore pipe 450 mm long complete all as specified and directed.

S&F PVC connection of 15mm bore 600mm long with brass coupling on both ends of superior quality complete all as specified & directed.

S&F in repair brass chromium plated shower rose of 125mm size complete all as specified and directed.

S&F in repair brass CP tubular towel rail of superior quality 20 mm dia 60 cm long between flanges fancy type complete all as specified and directed.( Make : Jaquar Cat Part No. "AQN -CHR- 7711" .)

S&F in repair towel ring 200mm dia superior quality complete all as specified and directed. (Make : Jaquar Cat Part No. "ACN -CHR-1121N " ).

S&F in repair chromoium plated box type toilet paper holder fancy complete all as specified and directed.

M&L cast iron floor trap (without hing) for 110 mm bore pipe with chromium plated grating including jointing to waste pipe with cement concrete 1:2:4 type B1 complete all as specified and directed.

M&L in reapir cast iron floor trap for 75mm bore pipe with chromium plated grating including jointing to waste pipe with cement concrete 1:2:4 type B1 complete all as specified and directed.

S&F PVC (SRW) gully trap 100/125mm setting and jointing with solvent cement etc complete all as specified and directed.

Dismantling of cast iron pipe of 100/75mm bore, jointed in CM and taking out of trenches, complete all as specified and directed.

S&F 100 mm bore CI Soil waste and vent pipes in any length with or without ears, with cement joints, fixed with wall complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm PVC (SWR) bends any radius complete all as specified and directed.

S&F CI bends (any radius), diminishing pieces or tapers (larger bore measured)100/75mm bore pipe complete all as specified and directed.

S&F CI Socket (double) collars complete all as specified and directed.

S&F 100 cast iron sanitary connection socket to fit WC out let complete all as specified and directed.

S&F, CI junction, double (double T) , equal or un equal for 110 mm bore pipe, provided with access door. complete all as specified and directed.

S&F 75 mm dia cast iron soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor/wall complete all as specified and directed.

S&F CI Trap P or S 100mm bore complete all as specified and directed.

S&F CI vent cowls 100mm bore complete all as specified and directed.

S&F 100mm dia of bore pipe stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stay including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F grating doom of size 125 mm dia of PTMT (minium weight 40 grams) complete all as specified and directed.

S&F grating doom of size 100 mm dia of PTMT (minium weight 25 grams)complete all as specified and directed.

S&F glass shelf assembly consisting of 5.5 mm thick glass sheet glass self 12 cm wide with chromium plated brackets fixed with and including chromium plated screws complete all as specified and directed .

S&F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass bracket complete all as specified and directed.

S&F brass chromium plated wall mixer for mixing hot & cold water in 3-in-1 with telephonic hand shower and 1.50m long flexible lead & screwed down for iron pipe of 15mm bore complete all as specified and directed.

S&F rotational moulded polyethylene coloured water storage tanks 1000 Litres capacity(cylinderical vertical with closed top) hoisted and fixed in position including dismantling of tank pf capacity exc. 500 litre & not exc. 1000 litre complete all as specified & directed.

S&F PVC ball valves (float valve), high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 20/ 25 mm bore pipe complete all as specified and directed.

S&F in repair curtain rods, coloured, standrad quality, PVC coated not less than 25mm dia with heads at both ends and middle support, rings etc. complete all as specified and directed.

S&F 20mm dia gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F peg set of solid body 125 mm to 175 mm CP brass fancy type complete all as specified and directed.

M&L for water proofing treatment to sunken portion of slab with 3mm thick polymeric water proofing membrane of weight not less than 3kg/sqm and making good in all respect complete all as specified below and directed. (a) 10mm thick plastering in Cm (1:4) using 100% coarse sand on roof/parapet walls with WPC @3% by weight of cement . (b) Applying a coat of bitumenous primer @ 0.50 litre.Sqm on prepared surfaces and allow to dry. (c) Applying a coat of hot blown bitumen grade 85/25 @ 1.20 kg/Sqm over primer. (d) Supply and laying of 3mm thick (minimum) ploymeric water proofing membrane weighing not less that 3 kgs/Sqm (e) Applying a tack coat of hot blown bitumen grade 85/25 @ 1.20 Kgs/Sqm

M&L for cement concrete type E-2 1:5:10 (40mm brick aggregate)/cinder filling in sunken floor portion in WC/Bath complete all as specified and directed

M&L for 25 mm thick cement concrete type B-1, 1:2:4 type B1 (20 mm graded stone aggregate) over sub base complete all as specified and directed

Demolition and breaking up any dia and above drain pipe( Salt glazed ware, AC,PVC or Reinforced concrete) set in cement mortar etc all as specified and directed.

S&F PVC (SWR) 75 mm bore pipes single socket in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) 100/110 mm bore pipes single socket in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

M&L PCC 1:2:4 type B0 using 12.50mm graded stone aggr as in coping benching finished fair and even incl necessary form work complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position complete all as specified and directed.

M&L precast RCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in cover slab of manholes set in CM (1:4) complete all as specified and directed.

S&F for TMT bar 6mm to 8mm dia, cut to length bent to shape required including cranking and bending for hooking ends and binding with mild steel (annealed) wire not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F for TMT bar 10mm dia and over cut to length bent to shape required including cranking and bending for hooking ends and binding with mild steel (annealed) wire not less than 0.9mm dia or securing with clips complete, all as specified and directed.

M&L for mechanical grinding and polishing of old kota stone flooring with mirror finish complete all as specified and directed .

S&F aluminium powder coated glazed three track sliding window shutters of section 38x20x1.30 mm thick and channel size 92x38x1.30 mm thick including 4mm thick plain sheet glass ordinary quality including all necessary sutiable screw, jointing cleats, rubber packing, aluminium snap beeding, suitable wheel and locking arrangements to the frame complete all as specified and directed. (Note :- Glass panes and wire mesh should be measured and paid separately .)

S&F standard aluminium anodised grill size of mesh 75x75 mm using U channel 25x12mm complete all as specified and directed.

S&F aluminium anodised frame/chowkat of aluminium door section of 100x44x1.50 to 1.8 mm thick fixed with rawal plug and screw or wire expansion hold fasteners complete all as specified and directed.

Providing and fixing anodized aluminium partly glazed and partly paneled door shutter side hung type using 1.50mm thick standered door section having size of styles, top rails 83x44mm where as bottom rails will be made up of 100x44mm including necessary joining cleats glazing clips, rubber packing, anodized aluminium snap beading screws, anodized aluminium fittings such as 100mm long 3 No. aluminium hinges B-21 ,type 01 No. aluminium tower bolt 200mm long and one no mortise lock 100mm size 4 levers (vertical type) and 01 No 300mm size long aluminium sliding bolt and 02 No fancey type fiber glass 150mm dia circular handle shall be provided to each door and glazing of top panel shall be made of 5.50 mm thick sheet glass Saint gobin and pannelling shall be provided with 12mm thick exterior grade pre laiminated partical board with both side choice laminations complete all as specified and directed.

S&F aluminium body door closer hydraulically regulated, designation No.3, universal type,suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. and fixed complete all as specified and directed.

S&F in repair for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty with & including replacement of floor tiles if any broken during repair work and making good disturbed surfaces matching to the existing surfaces complete all specified and directed.

S&F anodised alumium glazed window shutter sliding type using 1.30 mm thick aluminium open three track section having size of style & top rails 83x44mm, bottom rils 100x44mm including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading screws, anodised aluminium fittings complete and glazing shall be done by using 5 mm thick plain sheet glass and steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed

S&F anodised aluminium grill (opening of grill not more than 100x100mm) fixed to windows or ventilators with anodised aluminium U channel 25x12mm size complete all as specified and directed .

S&F 12 mm thick toughened glass door shutter of opening size 1.1x 2.00 metre in single leaf with necessary eatching including all fittings and pivot at top fancy type glass handle of size not less than 300 mm on both sides of shutter to match with colour of glass shutter top and bottom aluminium rail with suitable locking arrangement and all necessary fitting complete all as specified and directed .

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings converting window into door openings etc. or cutting out defective brick work for under pinning, including providing fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard core etc to store and rubbish not exc 50 mtr built in cement mortar complete all as specified and as directed.

Forming jambs etc to opening (to fore going items) including cutting, toothing and properly bonding in to old work ,also facing jointing and pointing to match existing work complete in CM 1:4.complete all as specified and directed.

M&L for cement concrete in type B-1, 1:2:4 (20mm graded stone aggregate) in walls any thickness size or shape including pilasters, columns, pillars (including caps and bases)complete all as specified and directed.

M&L 18/19 thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one faces etc all as specified and directed.

M&L 0.90 mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions etc all as specified and directed.

S&F ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in and fixed etc all as specified and directed.

M&L 2nd class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails not exc. 3 sqcm etc. complete all as specified and directed.

S&F 100/125 mm size fancy type brass handle for cub board shutter etc. complete all as specified and directed.

S&F sink made of stainless steel 1 mm thick kitchen or laboratory with plug, washer and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever bracket and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm incl 32 mm dia waste pipe of polythelene of low or high density, 32 mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B-0 etc all as specified and directed.

S&F 15 mm dia CP kitchen sink tap with swinging spout (wall mounted model) with flange etc. complete all as specified and directed. (Make- Jaquar Cat No- ORB-ESS-105347)

S&F white vitreous china laboratory sink size 600 x 450 x 200 mm with plugs, washers and waste cupling including beding in cement motar to fixed in RCC slabs with all necessary arrangement and connecting union to waste pipe etc complete all as specified and directed.

S&F sink cock with regular swinging spout (table mounted modle) 15 mm dia (Make:- Jaquar Cat No SOL-6357 ) etc. complete all as specified and directed.

S&F in repair 32mm brass chromium plated bottle trap for wash hand basins with inlet and outlet screwed for pipes or connections including necesssary packing,union and cap complete all as specified and directed.

S&F steel windows with side hung shutters (glazed) including projecting type hingess with steel handle and steel peg stay complete with glazing bars dovetailed or welded etc complete all as specified and directed.

S&F steel windows with side hung shutters (mosquito proof) including projecting type hingess with steel handle and steel peg stay complete without glazing bars dovetailed or welded etc complete all as specified and directed.

S&F framed work such as grills,grating, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railling; framework of watertanks and similar work conforming to Fe 290. Gde- E-165 etc complete all as specified and directed.

S&F formwork to soffits of suspended slabs such as roof slabs, floor slabs,CB slab, landings and similar work, not exc 200mm thick (Horizontal or slopping) for rough finished surfaces etc. complete all as specified and directed.

S&F framed work as in door or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel,sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete quality conforming to Fe-410W (Gde E-250) etc complete all as specified and directed.

S&F 1 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size holes punched; including round headed screws, clout nails or rivets and fixed to steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc as required complete all as specified and directed.

M&L for providing reinforced cement concrete ( 1:1.5:3) (Nominal mix) (using 20 mm graded crushed stone aggregate) as in roof slabs, CB slab etc complete all as specified and directed.

S&F rolled mild steel plate girder or single stanchions ,built up one beam or channel section with flange plate.caps,bases,splices,angle brackets,cleats and other connections confirming to Fe 410-W (Gde E-250,quality -A) complete all as specified and directed.

M&L PCC (1:2:4) 25 mm thick type B 1 (using 12.5 mm graded aggregate) as in floor etc complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete all as specified & directed.

Taking down carefully copper/aluminium sub main wiring from existing concealed PVC conduit complete and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall complete all as specified and directed.

Disconnecting/dismantling of old existing unserviceable DB's any way 240 Volts with their unserviceable.burnt MCB's/Isolators complete all as specified and directed.

Taking down & re-fixing the same after completion of wiring including connecting of electric connection of ceiling fan/exhaust fan with three core copper flexible wire 23/0.0076 complete all as specified and directed.

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and including concealed PVC Conduit medium grade, ISI marked not less than 19.5 mm / 20 mm dia along with conduit fixing accessories and with pressed steel terminal box thickness 1.6 mm painted with one coat of black bituminous paint as a primary and two coats of enamel paint with 3 mm thick laminated sheet (Make: Hylam) for provision of switches/regulators as per specified SSR and as directed by Engineer- in- Charge. . NOTE:-After rewiring cutting chasing portion should be matched with existing finishes of walls complete all as specified and directed.

All as per item No 175 above but 5 Amp socket outlet, independent complete all as specified and directed.

All as per item No 175 above but on the same board complete all as specified and directed.

All as per item No 175 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth duly complete all as specified and directed.

S&F switch piano flush type 5 Amp one way, single pole, 240 volts complete all as specified and directed.

S&F socket outlet 5 Amp, 5 Pin, 240 volt, flush type, complete all as specified and directed.

S&F switch socket outlet, two in one 5 & 15 Amp, 6 pin, multipurpose combination,complete all as specified and directed.

S&F for modular switch 1 way 6 amp 230 volt single pole one way complete all as specified and directed.. Make- Crabtree/ Havells/ Anchor/ Roma or equivalent as approved by GE

S&F for modular for socket outlet multipurpose 2-in-1, 5 pin 6 amp 230 volt modular type complete all as specified and directed.. Make- Crabtree/ Havells/ Anchor/ Roma or equivalent as approved by GE

S&F for modular for socket outlet multipurpose 2-in-1, 6 pin 6/16 amp 230 volt modular type complete all as specified and directed.. Make- Crabtree/ Havells/ Anchor/ Roma or equivalent as approved by GE

S&F for modular switch 1 way 16 amp 230 volt single pole one way complete all as specified and directed. Make- Crabtree/ Havells/ Anchor/ Roma or equivalent as approved by GE

S&F in repair modular metal flush box, including inner plate & white cover plate with frame, 2 modular way complete all as specified and directed. Make- Crabtree or equivalent as approved by GE

S&F in repair modular metal flush box, including inner plate & white cover plate with frame, 3 modular way complete all as specified and directed. Make- Crabtree or equivalent as approved by GE

S&F in repair modular metal flush box, including inner plate & white cover plate with frame, 4 modular way complete all as specified and directed. Make- Crabtree or equivalent as approved by GE

S&F in repair modular metal flush box, including inner plate & white cover plate with frame, 12 modular way complete all as specified and directed. Make- Crabtree or equivalent as approved by GE

S&F lamp holder with back plate suitable for batten fittings (white colour) complete all as specified and directed.

S&F ceiling fan regulator electronic 5 step for 1200/1400 mm sweep complete all as specified and directed.

S&F in repair ceiling rose, 3 phase/PVC/polycarbonate, isolated body three terminals complete all as specified and directed.

S&F wall mounted 4' LED tube light along with fixture, 2x20 W complete all as specified and directed.

S&F in repair MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed.

S&F in replacement MCB, single pole, 240 Volts, of capacity (6-32 Amps) as ordered breaking capacity 10 KA complete all as specified and directed. Make-Legrand Cat No-603231 to 603237 or equivalent as approved by GE .

S&F in repair MCB SPN, 40 to 63 Amps, 240 Volts , breaking capacity 10KA complete all as specified and directed. Make-Legrand Cat No-603272 to 603274 or equivalent in Hager/Seimens.

M&L for wiring with two single core 4 sqmm multi-stranded copper conductor PVC FRLS insulated and unsheathed cable ISI marked drawn through in and including PVC conduit medium grade concealed in wall for sub main connection including 2.5 Sqmm PVC insulated unsheathed stranded copper conductor as earth wire complete all as specified and directed.

All as per item No. 197 above but two single core 6 sqmm including 4 Sqmm PVC insulated unsheathed stranded copper conductor as earth wire complete all as specified and directed.

S&F in replacement surface mounted LED downlighter suitable for 12W LED 6000K with durable polycarbonate housing using AI. Heat sink & high brightness LED, with diffuser for glare free light, with removable driver to be connecting with ceiling rose with 1.5 sqmm twin core copper cable complete all as specified and directed.

S&F single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with one single pole MCB amp complete all as specified and directed.

S&F ceiling fan of 1200 mm sweep,230V,350-370 RPM,with air delivery of 215 cmm or more with BEE STAR RATED including provn of fan hook made of MS of required size and shape,hanging with the help of down rod upto 04 feet and connecting with provn of 3 core copper cable of size 1.5 sqmm from ceiling rose to fan complete all as specified and directed. (Make:- Khaitan/Havells/Crompton/Bajaj/Usha)

R P construction company

M/S SWATI CONSTRUCTION

Skyline Encon