GE/BAS 46/2022-23 SPECIAL REPAIRS TO BLDG NO T-25 OR LIVING (20 MEN) OF 401 (I) ARTY BDE CAMP AT BASOLI GRN UNDER GE BASOLI AND JANGLOT

Amount

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including including Dismantiling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings, complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantiling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings, complete all as specified and as directed.

M&L for 25mm thick plain cement concrete1:2:4, type B-0 using 12.5 mm graded crushed aggregate as in sub base of floor, complete all as specified and as directed.

M & L for Non skid coloured tiles 9-10 mm thick (Square/Rectangular) polished area of each tile exceeding 0.18 Sqn but not exceeding 0.38 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer 15mm thick in cement mortar 1:6 for laying floor finishes, complete all as specified and as directed..

M&L for Glazed ceramic plain / coloured/ printed tile 300x450x6 to 7 mm thick on vertical surface as in Dado. Skirting etc (coloured tile) including 15 mm thick screed bed in CM 1:4 set and jointed with neat cement slurry and printed with white cement to match the tiles inluding dismantling of old tiling removing rubbish off premises, complete all as specified and as directed.

Taking down chowkat with shutter exe 1.50 sqm nexe 4.00 Sqm including iron mongrey and making good in cement mortar in CM I:3 or cement concrete 1:2:4 type B-I, complete all as specified and as directed.

M&L Box type steel windows and ventilator comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes shall be measured and paid separately) with side hung shuttters with steel handle and steel peg stay devotailed or welded incl 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing shown on drg welded to GI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC block etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and direct

S&F 3mm thick sheet glass ordinary quality and glazing oil putty in square n exe 0.5 sqm, complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.48 mm nominal dia of wire and average width of aperture 1.16mm and fixed with tinned tank or galvanised wire staple, complete all as specified and as directed.

M&L for 35mm thick, 2nd class HW, factory made, plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply. The size of rail and stile as per IS:1003 (Part-I),complete all as specified and as directed.

Material & labour 35mm thick 2nd class hard wood factory made glazed and skelton shutters open rebated and prepared to receive glass,gauge etc (without sash bars), edges of framing plain chamffred or rounded,fitted with cut and mitered beads for securing glass, etc size of members of shuters as spd in SSR Part-I, Section 8, clause 8.24 (a), complete all as specified and as directed.

M&L for Pressed steel frame of size 125x60mm for doors with single rebated including mild steel hinge medium weight 100 mm long and 25x3 mm flat iron in holdfast , tie bar all necessary fixing arrangement complete all as specified and as directed.

M&L Plain Cement Concrete 1:3:6 type C-1 using 20mm graded aggregate, filling in pressed steel door frames, complete all as specified and as directed.

S&F angle iron steel work conforming to Fe-410-W (Gde E-250 Quality-A or B) or Fe-290 Gde E-165, as in Flat Iron, roof trusses (framed), purlins, crane gantries, rails and fastenings, heavy brackets framing (Beam, tee, angle, channel or flat section) or any type of Iron steel work required at site including distance pieces, cleats etc complete all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 300mm long, complete all as specified and as directed.

S & F 150 mm long extruded aluminium handles,fabricated type, anodised, complete all as specified and as directed.

S&F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and as directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, complete all as specified and as directed.

S&F 300 mm, MS ordinary halical or rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint on wooden surface over one coat of pink primer including preparation of new surface over 10 cm width or girth, complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint on steel surface over one coat of red oxide including preparation of new surface over 10 cm width or girth, complete all as specified and as directed.

Dismantiling wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and as directed.

S&F in position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600 x 600mm with GI frame work main runner 38 x 24mm cross tee 25 x 24mm and wall angle 24x24mm, using 8 mm thick ceiling panel laminated with PVC film on front face and foil back availavel in due drop texture as per IS-2095, part-I-1996, fixid in the grid of E-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butter fly clips complete all as specified and as directed.

Demolition of PCC in ground floor and paving nexe 15 cm thickness including tiles (Above or below ground level) and removing all the demolished material outside cantt area, complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6, type C-2, using 20 mm graded stone aggregate finished even and fair for plinth protection and finished rough for sub base of floor including necessary form work and mastic filling in plinth protection complete all as specified and as directed.

Material and labour 60 mm thick for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-40 Grade Top layer glazed made in white cement and pigment, in different colour and pattern (compressive strength not less than 250 Kg/SqCm) set on dry sand coushining of 50 mm complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:6 on brick wall surface or concrete surface finished even and smoth without using extra cement upto any height inluding Taking down cement plaster on brick or concrete surfaces in any description etc including racking out joints hacking for key scrubbing down with water etc and preparation of newly plastered surfaces of wall and applying two coats distemper oil emulsion including priming of new surface with chalk whiting complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:4 on brick wall surface or concrete surface finished even and smoth without using extra cement upto any height including Taking down cement plaster on brick or concrete surfaces in any description etc including racking out joints hacking for key scrubbing down with water and preparation of newly plastered surfaces of wall and applying two coats of cement base paint including priming surface with chalk whiting etc complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoin, arches pillars but excluding aslar facing dressed stone work and precast concrete article, complete all as specified and as directed.

M&L for brick work with subclass 'B' brick straight or curved on plan exe 6mm mean radius in CM 1:6, complete all as specified and as directed.

Material and labour for half brick wall brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in CM (1:4), complete all as specified and as directed.

M&L for brick work (except bricks) with subclass 'B' brick straight or curved on plan exe 6mm mean radius in CM 1:6, complete all as specified and as directed. NOTE:- Old bricks shall be used as directed.

Excavation in post hole each n exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth in layers n exc 25 cm each in soft and loose soil , complete all as specified and as directed.

M & L for PCC 1:2:4 type B-1 using 20 mm graded aggregates as in foundation of post and poles like including weathering slightly rounded or chamfered angles and throating etc. complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials from site after taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M&L for Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in and incl rigid PVC conduit concealed medium grade with PVC terminal sunk boxes with suitable thickness plastic laminated sheet cover 3mm thick of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed by Engr-in-charge. NOTE :- a) Rate for cutting chases for conduits and sinking for boxes and making good to wall, floors deemed to be included in each point etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for any necessary point with proper fixing clips and no extra cost shall be paid for the job etc all as directed.

All as per item No 36 but for one 3 pin 5 Amp socket outlet on independent board.

All as per item No 36 but for one 3 pin 5 Amp socket outlet on same board.

Point wiring with 2.5 sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes(sheet not less than 1.6mm thick) of adequate size with suitable thickness plastic laminated sheet cover 3mm thick for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS,PVC insulated and unsheathed copper conductor cable (multistranded) as earth wire to common earth dolly, complete all as specified. .

Supplying & Fixing switch piano flush button single pole one way 5 amps 230 volts, complete all as specified and directed

Supplying & Fixing Switch socket combination 2 in 1, 5 pin, 5 Amp flush type. Make :-C&S/Havells/polycab/Plaza

Supplying & Fixing socket outlet 5 amps 5 pin flush type, 230 volts, complete all as specified and directed.

Supplying & Fixing socket out let, 6 pin, 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts, complete all as specified and directed. Make :-C&S/ Havells /polycab/Plaza

S&F ceiling rose surface bakelite two to three terminal isolated body fixed on PVC round block complete all as specified.

S&F in replacement LED tube light fitting 1x16w,230v including LED tube rod with polycarbonate diffuser, 4 feet fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size. complete all as specified

S&F in replacement LED tube light fitting 1x10w,230v including LED tube rod with polycarbonate diffuser, 2 feet fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size. complete all as specified

S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for batten fittings, complete all as specified and as directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store, complete all as specified and as directed.

S&F Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service valu 6.00 BEE. Five Star rated with brushless direct current motor all as specified and directed.

S&F in replacmenet sheet metal powder coated vertical double door single pole and neutral (SPN) distribution board for MCB provision 230 Volts 50 Hz AC supply for 8 Way fitted with copper bus bar rated 200 Amps, neutral link, earth bar complete all as specified.

S&F MCB SPN 63 Amps with 10 KA Breakiing capacity of C series in distribution boards all as specified and dirrected.

S&F MCB SP 6-32 Amps with 10 KA Breakiing capacity of C series in distribution boards all as specified and dirrected.

S&F in replacmenet sheet metal powder coated vertical double door single pole and neutral (SPN) distribution board for MCB provision 230 Volts 50 Hz AC supply for 4 Way fitted with copper bus bar rated 100 Amps, neutral link, earth bar complete all as specified.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate up to 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe up to main board, funnel with wire mesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 metre earthing wire .)

S&F in Replacement of existing sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 4.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 4.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 4.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

Ashoka Engineers

Om Sai Ram Builders