Providing and fixing of wooden flooring and wooden blinds at One stop shop extended portion

Amount

"Providing and fixing Hollow core partition wall using 50x50 mm Chir wood frame 600 mm c/c on both directions excluding door opening portion with antitermite treatment as per direction of Engineer incharge and as per specifications (Drawing enclosed) as below :1. 50x50 mm Chir wood frame 600 mm c/c on both directions shall be fixed upto roof/beam height i.e. 10ft/8ft. Frame should be supported at floor and roof with horizontal post (wherever required) of size 50X50mm thick Chir wood 2. 12 mm thick MDF board both side (upto height i.e. 7ft of total false ceilig height of 8 ft) shall be fixed on both sides of chir wood frame. Laminate (1mm) of approved quaity & colour shall be fixed/pasted over MDF board upto 7ft height.3. Frosted glass of 8mm thickness (Saint Gobain or equalvent etc.) shall be fixed in a heigt of 1ft (12") at the top end of 8ft height wall panneling. complete as per direction engnieer incharge. Teak wood beading 25mmX20mm is to be used for glass fixing. Teak wood beading and frame is to be finished with melamine polish.4. Total thicknees of hollow core wall partition shall be 76mm. (Chir wood frame + MDF board on both sides + laminate on bothsides)5. The cost is inclusive all labour, material etc complete in all respect as per drawing & design enclosed & approved by engineer in charge.6. Area of aminated parttion below false ceiling only to be measured for payment. (Perspective view shall be as per enclosed drawing-A) "

Providing and fixing of 30mm thick Flushdoor of approved brand with 5mm thick glass fixed in the half portition with 25x20mm teak wood beading to be finished with melamine polish. On the remaing part of the door should be finished with 1mm thick mica as per approved brand and shade and colour. The door also shall have the door closer of good quality make of dorma or equalent with approved brand mortise lock, stopper etc. with brass accessosries. The cost is inclusive all labour, cutting, makeing hole etc. complete in all respect as per approved by engineer in charge.

Providing and fixing of horizontal venetian wooden blinds made of resin which, along with being water-resistant, is given a wood finish which does not warp. Blinds are made of basswood having a moister content of 8-12% and weight about 1.7 kg per sq. mtr. The weight factor is crucial for smooth lifting and the low moisture prevents the slats from wrapping. The blinds are fitted on specially extruded aluminium headrails duly powder coated and fitted with stainless steel drive rods with engineered double cord lift mechanism. As in wooden blinds, 50mm width basswood blinds stack less and give much more clear visibility as compared to 25mm wide blinds. Ladder Tapes add privacy and elegance.

Bidder Name

Amount

Rashmi Enterprises(GSTN-08AAEFR3518G1ZA)

AK JAIN AND ASSOCAITES(GSTN-08ABTPJ7664B1ZB)

M/S B L Sharma(GSTN-08AMXPS0110J1ZR)

Gurukirpa Contractor(GSTN-08GRMPS9256R1Z9)

M/S B L Sharma

Rashmi Enterprises

AK JAIN AND ASSOCAITES

Rashmi Enterprises

Gurukirpa Contractor

AK JAIN AND ASSOCAITES