REPAIR TO JOINERY, TILES, EXTERNAL WALL, PLASTER, CHAJJAS, SANITARY FITTINGS, RAIN WATER PIPES AND REPAIRS TO SUNKEN FLOORS INCLUDING LEAKAGE SEEPAGE AT CERTAIN BUILDING IN OTHER THAN MARRIED ACCOMODATION AT VAYUSENA NAGAR NAGPUR

Amount

Taking down of chowkat with shutter without taking off shutters from the frame exceeding 1.5sqm each but not exceeding 4 sqm all as specified and as directed.

All as per item No 1 above but not exceeding 1.5 sqm

Taking down of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed.

Dismantling of cupboard partition of any description fixed in any position with nail all as specified and as directed

Suplly and fixing ply wood grade BWR type BB 18/19mm thick (PLY) ISI marked fixed with screw to timber frame work fixed in repair all as specified and as directed.

Suplly and fixing ply wood grade BWR type BB 12mm thick (PLY) ISI marked fixed with screw to timber frame work fixed in repair all as specified and as directed.

Hacking out old broken glasses any thickness, size, quality or description from wooden frames glazed with putty or fixed with bead all as specified and as directed.

All as per item No 7 above but from metal frame including punching out or drilling out old glazing pins/spring clips and providing and fixing new.

Suplly and fixing 30mm thick 2nd class Hard wood skeleton door shutters complete all as specified and directed.

Suplly and fixing 30mm thick flush door shutter solid core construction with block board case and plywood face panels, commercial type on both sides all as approved by GE complete all as specified and directed.

Suplly and fixing stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples all as specified and as directed.

Supply & fixing sheet glass and glazing of 3 mm thick with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

Suplly and fixing sheet glass ordinary quality obscured or frosted on one side 3mm thick quality with oil putty or beads fixed with screws in sequence not exceeding 0.5 sqm in each pane all as specified and as directed.

Suplly and fixing extruded aluminium bow handles of size150 mm complete all as specified and directed.

Suplly and fixing aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm size complete all as specified and directed.

Suplly and fixing in repairs aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed.

Floor door stopper of aluminium alloy body double and tongue annodised with rubber shoe and fixed of size 150 mm all as specified and as directed.

Suplly and fixing in repairs aluminium anodised barrel tower bolt of extruded section 200 mm long and fixed all as specified and as directed.

Suplly and fixing in repairs extruded aluminium alloy handle fabricated type anodised 150 mm long complete all as specified and directed.

Suplly and fixing in repair hasp and staple, safety type aluminium anodised with hinge pin including bolt to hing plate and fixed with screw 125 mm long all as specified and as directed.

Material and labour for mild steel frame work such as gates, grills with ends of bar shouldered, welded or forged into spikes conforming to Fe 410-0 all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed.

Material and labour for for preparing new surfaces of wood of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

All as per item No 23 above but on steel surfaces over red oxide primer

Suplly and fixing 30mm thick (styles) factory made solid panel PVC door shutters consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site all as shown on drawing on page 146 of SSR Part-II 2004 including taking down the old PVC door shutters as specified & as directed.

All as per item no. 25 above but partly glazed/gauzed i.e. upper panel will be glass pane or wiremesh fitted externally in the clear space & lower panel will be plain colour PVC sheet complete all as specified and directed.

Suplly and fixing solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel tube & fixed in position as per manufacturer's instruction & fixing to wall with ancor bolt or screw with nemani wall plug (size 12 to15 cm long ) all as specified, as shown on drawing on page No 150 of SSR Part-II 2004 including taking down the old PVC door frame as specified & as directed.

Suplly and fixing in repair 300 mm long, mild steel ordinary rat rail springs including roller and roller plate complete and facing down old one all as specified and as directed.

Suplly and fixing in repairs Harrison curtain rails, 25 mm dia, anodised aluminium alloy with fixing brackets, stops, rollers etc including taking down old one all as specified and as directed.

Material and labour for welding in repairs to broken hinges of doors and windows to metal frame all as specified and as directed.

Suplly and fixing in repairs mild steel handle to existing steel windows left or right (as per existing pattern) all as specified and as directed.

Dismantling of wall and celling board (fiber, pulp, insulation, etc) or insulation board / slabs/ blankets, any thickness, including cover fillets all as specified and directed.

Material and labour for providing Gypboard (conforming to IS-2095-1982) manufactured by M/s India Gypsum false ceiling using GI perimeter channel of size 20mm (one flange) x 27mm (web) x 30mm (other flange) x 0.55mm thick along perimeter of ceiling fixed in wall using nylon sleeves and screws suspended from soffit with GI intermediate channels (of size 15mmx45mmx15mmx0.9mm thick) @ 1220mm centre to centre with ceiling angle (of size 25mmx10mmx0.55mm thick) fixed to soffit with GI cleat and steel expansion fasteners which alternate fixed to ceiling section of 0.55mm thick having Knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm) using connecting clip and in direction perpendicular to intermediate channel @ 300 mm centre to centre and Gypboard fixed to ceiling section using 25mm drywall screws @ 230mm centre to centre complete all as per manufacturer’s instructions and as directed.Including 2 coats of OBD over a coat of 1mm thick putty and taking down of old false ceiling complete all as specified and directed.

Material and labour for exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid and 8 mm thick including anodised aluminium / powder coated GI snap grid frame work of size 605 x605 mm for false ceiling including hangers as required at site complete all as per manufacturer's instructions and as directed by Engineer-in-charge

Suplly and fixing steel work in tubular sections including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 etc all as specified and directed.

Suplly and fixing roof trusses (framed),trussed, purlins, crane gantries, rails and fastining and heavy bracket framing (beam, tee, angle,channel or flat section) including distance pieces , cleats etc. Fe 410 -W (Gde E-250) quality-A complete all as specified and directed.

Suplly and fixing mild steel screw bolts(Machine made) with hexagonal or square head at one end and screwed the other end n exc 5 cm long and diametre of neck exc 5 mm but n exc 10 mm dia all as specified and directed.

Material and labour for mild steel plates (Plain or chequred) channel square cut or not chequred (ordinary and counter sunk) forming holes, with or without any attachment for Fe-410-W Gde-E 250 quality 'A' complete all as specified and directed.

Excavation in post holes (or similar holes) in soft/loose soil each n.exe 0.5 Cum & getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc. 25 Cm watering & removing surplus spoil to a distance n.exe 50 mtr complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) Concrete, brick work, masonry, etcany section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Material and labour for plain cement concrete in foundations, filling and mass concrete (PCC) Type D2 1:4:8 (40 mm graded aggregate) etc complete all as specified and directed.

Dismantling asbestos cement, galvalume, fiber sheet (Plan, corrugated , semicorrugated, etc.) sheet in roof covering complete all as specified and directed.

Supply & fixing polycarbonate sheet, plain or coloured of 6mm thickness with multiwall along with other necessary accessories (i.e. Rubber bedding, aluminium strip etc) as in roof covering as specified and as directed.

Suplly and fixing Pre painted GalvaIume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and directed.

Suplly and fixing Pre painted GalvaIume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in ridge of roof covering fixed with self tapping screws etc complete all as specified and directed.

Material and labour for repairs of aluminium anodised or powder coated aluminium door/windows, Toughened glass door of any size,thickness or any section including aluminium beading,5mm thick tinted glass or 12 mm thick prelaminated particle board with decorative choice lamination on both faces,handle ,bottom rail,lockrails and repair/replacement of hydraulic door closer or double action floor spring hydraulically regulated and refixing in same opening all as specified and directed. Note: Hydraulic door closer and double action floor spring and tinted glass and particle board if replaced shall be measured and paid separately rest items deemed to be included in unit rate complete all as specified and directed.

Material and labour for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators , fixed partitions including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever equired including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions.

Suplly and fixing in repairs door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one all as specified and directed.

Suplly and fixing / Suplly and fixing in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed. including taking down old floor spring hydraulically complete all as specified and directed.

Suplly and fixing in repair silding aluminium window locks including removing the old one all as specified and directed.

Suplly and fixing mild steel 4 levers mortice lock, vertical type, size 100 mm all as specified and directed.

Supply & fix for 12 mm thick toughened glass door/ patition of approved colour, design & logo (if required any type) side opening type or sliding type with complete fittings of make DORMA or equivalent as approved including pivot hing/floor spring , handle fancy type (for VIP office doors), locking divice with duplicate kye, Spenders partition fixing rods/clits & other fittings if riquired etc & connecting jobs like tile cutting, demolition pcc, plastring & painting etc not exc. 1.50 Sqm to make site good all as specified and directed. Note- All the fittings will be approve by GE/Engr-in-charge before work started at site) complete all as specified and directed.

Material and labour for providing aluminium composite panels shall consist of following (I) 3 mm thick thermoplastic core of anty toxic LDPE sandwitched between 2 skins of 0.5 mm thick aluminium sheet making a total panel thicckness of 4 mm with outer surface finished with PVDF based coating 30 micron ,ineer surface finished with a thin coat of polyster paint (II) aluminim framing of section 38 mmx50 mm x1.50mm thick (III) aluminium grid shall not be exceed 1.0 sqm each the aluminium grid shall be fixed with clamp 40x6 mm not more than 1 m c/c (IV) Colour shall be approved by GE.

Dismantling of floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Material and labour for non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, over and including 15 mm screed bed in Cement Mortar (1:6) in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles all as specified and directed by Engr-in Charge all as specified and directed by Engr-in Charge

Material and labour for Glazed Ceramic colour tiles in vertical surface of size 350x 250x 7 mm/ 450X 350X 7mm thick over and including Rendering 10mm thick CM 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match with the tile colour complete as specified and directed

Material and labour for Granite (of any type) work (table rubbed and polished) of 18-20 mm thick in steps, jambs, pillars, window-cills, cooking platforms over Screed bed or bedding layer of mortar 15mm thick CM (1:4) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platform and like in cement in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite stone including grinding and polishing complete all as specified and directed.

Material and labour for Dark shade Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Material and labour for rounding to one edge of stone slabs edges, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including floor finishes work and disposal of debris out side MoD land complete all as specified and as directed.

Demolition of Brickwork or stone /boulder masonry built in cement mortar complete all as specified and directed.

Material and labour for Brickwork with fly ash bricks , straight or curved in plan exc 6 m mean radius built in CM(1:6) complete all as specified and as directed.

Material and labour for Brickwork with fly ash bricks ,straight or curved in plan to any radius in half brick thick wall in CM(1:4) complete all as specified and as directed

Taking down cement plaster on brick or stone wall,concrete, etc including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Material and labour for Rendering 15mm thick on fair finish of bricks/concrete/stone surface of wall in CM (1:4) using WPC and finished the surface even and smooth without using extra cement (WPC to be mesuared and paid separately) complete all as specified and directed.

Material and labour for rendering 5mm thick on Ceiling in CM (1:3) finished the surface even and smooth without using extra cement. complete all as specified and directed.

Material and labour for 10mm thick rendering in CM (1:6) finished the surface even and smooth without using extra cement on fair faces of brickwork or concrete surfaces complete all as specified and directed.

Supply only integral water proofing compound ISI marked complete all as specified and directed.

Material and labour for providing 75mm thick PCC (1:3:6) type C2 using 40 mm graded aggregate as Plinth protection / Path finished the surface even & smooth with out using extra cement complete all as specified.

Material and labour for forming construction joint 30mm deep x 10mm wide filled with sealing compound complete all as specified.

Material and labour for water proofing treatment of sunken portion of toilet,cement mix with mastercrete-M-81 of CHOKSEY CHEMICALS (or equvilent product of other company) in the ratio of 2:1,two part of cement and one part of mastercrete-M-81 and applied in two coats @ 0.75 kg /sqm per coat all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for all as specified and directed.

Material and labour for cement concrete (1:5:10) type E2 (using brick course aggregate) as in filling sunken portion where required, complete all as specified and as directed.

Material and labour for plain Cement concrete (1:2:4) type -B1 using 20mm graded aggregate, 40mm thick as in sunken floor, fair finish with using extra cement complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore all as specified and as directed .

Suplly and fixing GI Tubes, ‘medium grade’, galvanised, Concealed with all fitting 15mm including cutting of Stone , Concrete Block or Slab walls and making good complete as specified and directed

Refixing old steel tubing 15mm dia and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

All as per item No 76 above but 20mm bore.

All as per item No 77 above but 20mm bore.

All as per item No 78 above but 20mm bore.

Material and labour for preparation of old plastered ceiling surfaces with applying one coat of white wash complete all as specified and directed.

Material and labour for preparation of old plastered wall surfaces applying one coat of white wash complete all as specified and directed.

Material and labour for preparation of old plastered wall surfaces applying one coat of distemper oil emulsion complete all as specified and directed

Material and labour for preparation of old plastered external wall surfaces applying one coat of cement based paint complete all as specified and directed

Material and labour for preparation of old plastered ceiling surfaces applying one coat of distemper oil emulsion complete all as specified and directed.

Material and labour for preparation of newly plastered wall surfaces by applying two coats of distemper oil emulsion over a coat of primer all as specified and directed

Material and labour for 2 mm thick wall care putty in two coats on walls and finished the surfaces smooth and cleaned etc complete all as specified and as directed.

Material and labour for preparation of Newly plastered external wall surfaces by applying two coats of cement based paint over a coat of primer and complete all as specified and directed

Material and labour for preparation of newly plastered ceiling surfaces and applying two coats of distemper over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for preperation of old painted steel surfaces, and applying one coat of Synthetic Enamel paint on steel surface over 10 cm girth including preparation of surface complete all as specified and as directed.

Dismantling water tanks exc 500 ltr but n exc 1000 ltrs complete all as specified and as directed.

All as per item No 92 above but 250 ltr but n exc 500 ltrs.

Suplly and fixing in repair Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

All as per item No 92 above but 1000 ltrs capacity.

Suplly and fixing in repair chromium plated fency type stop cock/angular cock (Weight not less than 575 gms), cast copper allay, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore complete all as specified and as directed.

Suplly and fixing in repair Ball brass valve 20 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed

Suplly and fixing PVC(SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Suplly and fixing PVC(SWR) Bend 110mm bore complete all as specified and as directed.

Suplly and fixing PVC (SWR) Tee 110mm bore complete all as specified and as directed.

All as per item No 98 above but 75 mm bore

All as per item No 99 above but 75 mm bore

All as per item No 100 above but 75 mm bore

Suplly and fixing in repairs brass chromium plated bottle traps 40mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed all as specified and directed.

Suplly and fixing in repair grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) all as specified and directed.

Material and labour for PVC (SWR) floor trap with grating,75 mm bore, including jointing to waste pipe with solvent cement including taking down of existing old trap all as specified and directed.

Suplly and fixing High density poly?ethylene pipes (HDPE) 15mm of pressure rating 6 kgf/cm2fixed complete to walls, ceilings or in floors etc. including taking down old one all as specified and as directed.

Suplly and fixing High density poly?ethylene pipes (HDPE) 20mm of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. including taking down old one all as specified and as directed.

Suplly and fixing in repair Cast iron nahani trap, with grating 100 mm dia including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed.

Suplly and fixing in repair hand Shower (Health Faucet) (ABS Body) with 8mm Dia, 1.5 Meter Long Spirochrome flex tube & Wall Hook all as specified and directed. Make :Jaguar CODE-ALD 587 or equivalent in Kohler/ CERA/ Johnson

Supply and fix in repair Pillar cock 15mm dia, swan neck tap with left hand operating knob with 450mm Long braided hose complete all as specified and directed. Make : Jaquar Code- CON-123BKN or equivalent in Kohler/ CERA/ Johnson

Supply and fix in repair 2-way Bib Cock with Wall Flange, Chromium plated, 15mm complete all as specified and directed. Make : Jaguar CODE-FUS-29041or equivalent in Kohler/ CERA/ Johnson

Supply and fix in repair bib cock, chromium plated, 15mm dia complete all as specified and directed. Make : Jaguar CODE-CON-037KN or equivalent in Kohler/ CERA/ Johnson

Supply and fix in repair 15 mm bore chromium plated fancy type bib taps, (Weight not less than 575 gms), cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

Supply and fix in repair Angle cock, Chromium plated, 15mm complete all as specified and directed.

Supply and fix in repair stop cock, Chromium plated, 15mm complete all as specified and directed. Make : Jaguar CODE-FON-40053 or equivalent in Kohler/ CERA/ Johnson

Supply and fix in repair Soap dish holder (CP Brass) complete all as specified and directed. Make : Jaguar code-AKP-35731P or equivalent in Kohler/ CERA/ Johnson

Supply and fix in repair towel rail complete all as specified and directed. Make: Jaguar Code-AQN-7711 or equivalent in Kohler/ CERA/ Johnson

Supply and fix in repair toilet paper holder with flap complete all as specified and directed. Make: Jaguar Code-AKP-35753PS or equivalent in Kohler/ CERA/ Johnson

Suplly and fixing in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and taking down old one complete all as specified and as directed

Suplly and fixing in repair vitreous china squatting pan, 'Orrissa pattern" size 630x450mm white with integral foot rests, including PVC ' P' or 'S' trap (excluding flushing cistern and flush pipe) complete bedding all as specified and directed.

Suplly and fixing in repair vitreous china wash down water closet pan (Pedestal pattern), white, including fixing of flush pipe, nut bolts, brackets etc complete all as specified and as directed.

Suplly and fixing in repair Plastic water closet seat cover, black/white, closed pattern with flat bottom, and cover and mild steel chromoium plated or aluminised hinging devices complete all as specified and as directed.

Suplly and fixing in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed

Suplly and fixing in repair Vitreous China wash basin, white, flat back of size 550 x 400 mm including CI brackets, waste coupling ,brass CP pillar tap 15mm screwed down high pressure , PTMT bottle trap, pvc supply pipe 15mm from stop valve 450mm etc complete all as specified & as directed Make :Prayag/ Parryware/Haindware

Supply and fix in repair,waste pipe of 32 mm dia low density polythelens (LDPE) pipes of pressure rating 6 Kgf/Sq cm complete all as specified & as directed

Taking down existing plaster, concrete /brick coba /tiling from the roof and roughening the surface ,wire brushing , cleaning and washing with water etc and removing the rubbish to a distance exceeding 1.5km outside the VSN and depositing where directed .

Material and labour for for Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed with chemical compound as per manufactures instruction as approved by GE all as specified and directed.

Material and labour for for Screed bed or bedding layer of mortar 20 mm thick in CM 1:6 with WPC for laying floor finishes all as directed.

Material and labour for grouting in roof through PVC nipples at a spacing of 45 to 60cm C/C including drilling injection points to a depth of 75-100mm, providing 10mm dia PVC nipples and pressure grouting using with and including cement mixed with plasticizing admixture like FOSROC (model CEBEX100) or PIDILITE (model 207 PIDICRET 8AM) @ 225gms/50kg of cement to fill up all capillaries/ voids/ honeycombing areas inside concrete with pressure of 2 to 4 Kg/Sqcm and continued till refusal. After grouting, nozzles to be sealed with the sealing compound/mortar etc, all as per manufacturers instructions and as directed. Note:- After ascertaining the location of leakage/ seepage/dampness, this item shall be operated at the required location.

Material and labour for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate RCC roof slabs to fill undulations to achieve uniform slope complete all as specified and directed.

Taking down carefully existing bitumen tar felt including plaster, roughening the surface ,wire brushing , cleaning and washing with water etc. , and removing the rubbish to a distance exceeding 1.5km outside the VSN and depositing where directed.

Material and labour for roof treatment on RCC roof slab complete as mentioned below, all as specified and as directed:- (i) Cleaning the concrete surfaces of RCC roof slab thoroughly with wire brushes, washed and dried. (ii) Checking the roof slab by flooding test with water till total elimination of leakage/seepage/ dampness all as specified in SSR Part-I (after ascertaining location of leakage/seepage/ dampness, carrying out treatment of pressure grouting shall be operated at the required locations. (iii) Brushing surface with neat cement slurry at the rate of 1.2 kg of cement per Sqm. (iv) Cleaning the plastered roof surfaces and applying a coat of bitumen primer @ 0.3 kg/sqm on top of dry surface and applying hot blown bitumen at the rate of 3kg/sqm. (v) Laying APP modified polymeric membrane 3mm thick with non woven polyester core laid and bonded to the sub-strata and over-laps shall be sealed/fused by flame "torch', application method

Material and labour for applying bitumen base aluminium paint at 0.2 kg/Sqm in two coats over APP modified polymer for non accessible roof.

Material and labour for a coat of hot blown bitumen @1.2Kg/sqm shall be applied over polymeric membrane and blinded with clean dry sand at the rate of 0.5 kg/sqm for accessible roof surface.

Material and labour for rendering 10 mm thick in CM 1:3 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement and finished surfaces fair and even without using extraa cementall as specified and directed. Note: WPC shall be measured and paid separately

Material and labour for repairing of roof, chajjas etc with and including comprising of the following steps:- (a) Cleaning & drying thoroughly existing surface of roofs, chajjas, etc for all foreign matters such as fungus, moss, dust, etc by wire brushing and dusting. (b) Removing loose concrete, surface cracks etc. and then applying/ filled with Dr Fixit crack X or polymer modified mortor in case of wider cracks (bitumen based waterproofing treatment must be removed by mechanical scarification) (c) Applying one coat Dr fixit roof seal top coat (diluted with water 2:1) at the rate of 100-110 sqft/ltr and then allow it to dry for 2-3 hrs (d) Applying two coats Dr fixit roof seal top coat (diluted with water 2:1) embed a glass fibre mest (2 x 2 mm - 40 gms) between the first and second coat as reinfocement complete all as specified and directed. Make: Dr Fixit roof seal or equivalent in SIKA/ STP as approved by GE Note: Work shall be carried out through authorised applicator of the product.

Material and labour for for repairing of walls and other vertical surfaces with and including comprising of the following steps:- (a) Cleaning & drying thoroughly existing surface of walls for all foreign matters such as fungus, moss, dust, etc by wire brushing and dusting (b) Removing loose concrete, surface cracks etc. up to 5 mm width must be fillied with Dr Fixit crack X or polymer modified mortor in case of wider cracks (c) Use Dr Fixit Raincoat Neo directly from the container (stir content well before use) with brush /roller apply a self priming coat of Dr Fixit raincoat Neo on the vertical surface in SSD condition diluting 1 Ltr coating with 100 mm clean portable water (d) Applying two coats of Dr Fixit raincoat Neo without dilution as waterproof top coat either by roller or brush with force coverage at the rate of 3.7 -4.1 Sqm/ltr to achive 100-110 micron DFT complete all as specified and directed. MAKE: Dr Fixit rain coat neo or equivalent in SIKA/ STP as approved by GE Note: Work shall be carried out through authorised applicator of the product.

Material and labour for liquid water proofing concrete surface for roof/chajjas by applying 1 coat primer of Tiki Aquaseal ARR/PU S/PU AHS or equivalent in SIKA/ STP and then applying 2 coat of Tiki Aquaseal ARR/PU S/PU AHS or equivalent in SIKA/ STP as per direction of manufacturers including cleaning of existing surface all specified and directed . Note: Work shall be carried out through authorised applicator of the product.

Material and labour for preparation of brick wall surfaces thoroughly by cleaning, washing and removing dust, dirt, oil and loose particles and applying two coats of water proofing liquid Dr. Fixit Pidicrete URP or equivalent in SIKA/STP/Asian on brick surface and mixing with cement as per manufacturer's instructions .

Material and labour for removing loose concrete from chajjas, perapets, fascias, pillars, columns etc in area not exc 2 sqm on plan and repairing the same with cement mortar 1:3 or cement concrete type B-0 ,1:2:4 (12.5mm graded aggregate) including white washing/ distempring/ weather proof paint/ cement based paint as per existing surface complete all as specified and directed.

Material and labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old/new surfaces.

Material and labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces all as specified and as directed.

Material and labour for applying acrylic smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over and including one coat of paste with rusting material over one coat of putty (if required) including complete removal of existing surface finish with wire brush and washing complete as per manufacturer instructions and as specified and directed by engineer- in-charge. Note: (i) Paste of rusting material shall be applied as per manufacturers instructions. Make : Asian/Berger/ Nerolac (ii) Make of acrylic Smooth exterior paint shall be from Asian / Dulux/Nerolac as approved by GE. (iii) 1mm thick wall care cement putty where ever required shall be measured and paid separately.

Material and labour for for dampness rectification on external wall surface :- surface preparation, removing existing putty/plaster/POP surface from the affected wall with wire brush/grinder/hammere etc up to brick level. Coating:- Applying two coats of Dr fixit pidifin 2k/ berger or equivalent (a two component , anti-fungal, acrylic waterproofing coating) over cleaned surface with brush and allowing it to dry for 24 hrs Finishing the surface: Applying plaster over the treated surface with water proofing compound and applying 1 coat of putty over plaster to provide proper finish after that one coat of acrylic based single component liquid elastomeric water proofing coating (Berger HS W/C roof guard or equivalent) with synthetic fibre @ 20% dilution over base coat and 2 coat of premium polyurethene based acrylic emulsion (Berger platina weather coat long life or equivalent) as finish coat in desire shade after proper curing as directed by Engr-in-charge. Note:- Required scaffolding is encluded for painting in any height.

Material and labour for for silicon gel filling with gun to fill gaps between aluminium door frames/similar articles to arrest water coming inside from cills/jams and similar joints in other places complete all as specified and as directed. Note:- Make of silicon shall be approved before use by GE/EIC.

Material and labour for for repair of joints of old APP membrane as in roof, chajja, parapet etc sealing with torching method including fixing of new APP membrane with primer and any other adhesive where is required etc complete all as specified and as directed.

dhanshree enterprises (BID ID -3197913)

M/s Prakash R. Verma (BID ID -3201569)

Bidder Name

M/s Prakash R. Verma

dhanshree enterprises

Dua Construction