SITC of Airconditioning System

Amount

S&D of minimum 1.5 Tr Capacity ceiling suspended [concealed] Split Air Conditioner with R410A / R407C / R-32 Refrigerant, with Rotary / Twin Rotary Compressor with minimum Cooling Capacity not less than 5.4 KW, Air Flow not less than 560 CFM, Moisture Removal should be 1.6 I/hr, EER not less than 2.8 KW/KW, Minimum cu. pipe Length from ODU to IDU not less than 20 MTR & suitable for operation on 230V,+_ 5% , 50Hz, 1Ph AC Supply. with precharged refrigerant, Wired/ Wireless remote & all other accessories complete with refrigerent gas and other necy. items. as per direction by EIC (Make : Mitsubishi heavy industries / O General / Daikin ).

Installation, testing & Commissioning 1.5 Tr Concealed Split type AC Machine with all accessories i.e., fastner, nut bolt, wall cutting, all glass window/grill cutting where needed with S&F heavy gauge ODU iron brecket, IDU tie rod, MS C Channel etc. incl. mending good damages as per direction of EIC.

Supply & fixing of HVAC grade copper pipe with minimum thickness 9 mm Nitril Rubber insulation of following sizes for liquid and gas line between ODU and IDU (Make - Ryoku/Nippon):-

(a) 5/8" (gas line).

(b) 1/4" (liquid line).

Supply & Laying of following PVC insulated Copper Cable ("FRLSH") on wall incl. making connections as per direction of EIC.(As Control Cable from ODU to IDU ) ( Make : KEI/ Finolex/ Pollycab/Gloster)

(a) 3 core 2.5 sqmm

(b) 3 core 1.5 sqmm

Supply, design, fabrication, installation of MS structural work for supports IDU/ODU both where needed i.e., 25x6 mm MS flat bar/ 50x50x6 mm MS Angle/ 50x6 MS C channel/ 25x25x6 mm MS Angle etc with 2 coat painting (Approved by EIC) and vibration pad, stainless steel (SS-304) nut bolts as per site requirement.incl scraffolding and carring charges .(ODU/IDU Support) (As per direction of E.I.C)

Supply & Fixing of perforated GI cable tray for covering of regfrigerent pipe line of Split/Concealed type AC Machine incl. S&F GI connector, 6 mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. (As per direction of E.I.C)

150x50x1.25mm (18SWG)

Supply & laying PVC Drain Pipe (25mm dia) for drainage water including all accessories i.e., elbow, socket, tee, saddeling etc. as per direction by EIC. (make - Oriplast/Supreme)

TERMS & CONDITIONS :- The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/ submission of bill. If any refurbished material is supplied and installed, penal action will be taken as per existing rules

Defect Liabibility Period 1 (One) year

Make & model of each and every material to be approved by EIC

M/s Singh Electrical Works (BID ID -5587789)

FAME ENGINEERING (BID ID -5591643)

ELEGANT POWER (BID ID -5589955)