REPAIR/REPLACEMENT/CLEANING OF SEWAGE LINE MANHOLE, SEPTIC TANK AND SOAK WELL INCLUDING CLEANING OF DRAIN AND MISC WORK ETC AT MANASBAL UNDER GE 970 EWS.

Amount

M&L for cleaning of SGSW / RCC / PVC sewage line upto 250mm dia by rodding / auger rods & drain pipe machine as required from manhole to manhole including gully trap and getting out the sludge from any size of manholes & gully traps before & after cleaning process of SGSW / RCC / PVC sewage line and well flushing using clean water through water bowser pipe of any capacity (arranged by the Contractor) and removing the sludge etc to a distance n.exc 250m and burying the same underground by digging pit of suitable size from habitant area and returning & filling with excavated materials upto ground level including removal of surplus soil to a distance n. exc 250m with and including taking off manholes / gully trap covers and re-fixing the same after cleaning process complete all as specified and directed by Engr-in-Charge. Note : 1. The Contractor / site supervisor will attend the complaint cell of AGE B&R-III to receive the complaint slips daily at 0900hrs to carry out the complaints and completion report will be submitted to concerned JE / AGE in the same day i.e. before 1700hrs. 2. If Contractor is to be failed to carry out to completion the jobs within the stipulated time period, the recovery will be chargeable at the rate of Rs. 75.00 per RM for every day.

M&L for cleaning / taking off of sludge (solid / semi solid) of any state from manhole of any size including gully trap having depth upto 3.00m by using machinary or manually as required and removing the same to a distance n.exc 250m and burying the same underground by digging pit of suatible size from habbatient area and returning & filling with excavated materials upto ground level including removal of surplus soil to a distance 250m with and includig taking off manholes / gully trap covers and re-fixing the same after cleaning process complete all as specifed and directed by Engr-in-Charge. Note : 1. The Contractor / site supervisor will attend the complaint cell of AGE B&R-I to receive the complaint slips daily at 0900hrs to carry out the complaints and completion report will be submitted to concerned JE / AGE in the same day i.e. before 1700hrs. 2. If Contractor is to be failed to carry out to completion the jobs within the stipulated time period, the recovery will be chargeable at the rate of Rs. 165.00 per Each Job for every day.

M&L for opening / cleaning of blocked WC of any type, traps and CI / PVC drain pipe including fittings (i.e. access door bends / tee etc) of any size at any floor & position with and including taking down of CI / CP / PVC grating and refixing the same at position with appropriate materials / fittings i.e. white cement, solvent, nuts & bolts etc and well flushing, pressure pumping, taking out all residue materials etc and removing the same to distance not exc 250 mtr, burried the same underground by digging pit of suatible size from habbatient area and covering same wrt the earth level including removal of surplus soil to a distance 250m, complete all as specified and directed by the Engr-in-Charge. Note : 1. The Contractor / site supervisor will attend the complaint cell of AGE B&R-III to receive the complaint slips daily at 0900hrs to carry out the complaints and completion report will be submitted to concerned JE / AGE in the same day i.e. before 1700hrs. 2. If Contractor is to be failed to carry out to completion the jobs within the stipulated time period, the recovery will be chargeable at the rate of Rs. 65.00 per Each Job for every day.

M&L for dewatering of contaminated waste effluent from septic tank, soakage well of any capacity by sewer jetting cum suction machine vehicle / honey sucker machine vehicle from any location and disposal to suitable place i.e. authorised civil location with and including taking off & re-fixing manholes covers etc complete all as specified and directed by Engr-in-Charge. Note : 1. The Contractor / site supervisor will attend the complaint cell of AGE B&R-III to receive the complaint slips daily at 0900hrs to carry out the complaints within 48 hrs from receipt of compalints slip and completion report will be submitted to concerned JE / AGE before 48hrs as per complaint slip time. 2. If Contractor is to be failed to carry out to completion the jobs within the stipulated time period, the recovery will be chargeable at the rate of Rs. 730.00 per Cum for every day.

M&L for cleaning of septic tank of any capacity and depth including inlet / outlet chamber after mixing of contaminated waste effluent and sludge etc of septic tank by mixing machine to change the state of solid / semi solid sludge to liquid state by using extra water provided by the Contractor if required and getting out through sewer jetting cum suction machine vehicle / Honey sucker machine vehicle from any location and disposal to suitable place i.e. authorised civil location with and including taking off & re-fixing manholes covers etc complete all as specified and directed by Engr-in-Charge. Note : 1. The Contractor / site supervisor will attend the complaint cell of AGE B&R-III to receive the complaint slips daily at 0900hrs to carry out the complaints within 48 hrs from receipt of compalints slip and completion report will be submitted to concerned JE / AGE before 48hrs as per complaint slip time. 2. If Contractor is to be failed to carry out to completion the jobs within the stipulated time period, the recovery will be chargeable at the rate of Rs. 1000.00 per Cum for every day.

M&L for excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shaft,wells,cesspits,manholes,sewage line,pier holes n.exc 10 Sqm on plan and n. exc 1.5m in depth and getting out in soft/loose soil compete all as specified..

M&L PCC (1:3:6) type C2 in foundations, filling and mass concrete to sub base of manholes etc all as specified.

M&L for brick work in repairs with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 incl demolition of brick work in any mortar complete all as specified and directed.

M&L PCC (1:2:4) type B1 as in coping, haunching and benching to manholes complete all as specified

M&L Rendering 10mm thick in CM (1:4) mixed with liquid WPC as per Manufactorer~s instruction to concrete surface finished even and smooth w/o using extra cement.

Supply only liquid Water Proofing Admixture @ 200 ml/50 Kg of cement complete all as specified

M&L reinforced cement concrete pipes 150mm dia class NP3 laid and jointed complete with collars or spigot/socket ends incl demolition and disconnecting of existing sewage line complete all as specified.

Returning, filling in soil, including spreading,levelling ,watering and well ramming in layers n.exc 25 cm thick each layer as in soil all as specified.

Removal of excavated incl material (Soil) to a distance n.exc 50M and depositing where directed at a level not exceeding 1.50M above the starting point.

M&L precast RCC (1:2:4) type B1 , set in cm (1:6) as in manhole cover slabs. (Note : Reinforcement shall be measured and paid separately).

S&F Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending etc., and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified.

Dismantling of cast iron, PVC, swg Pipe or asbestos pipe set in any motrar in connections of any dia.

S&F PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in tranches or in floors or wall (110mm bore) all as specified.

S&F PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in tranches or in floors or wall (75mm bore) all as specified.

S&F PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in tranches or in floors or wall (50mm bore) all as specified.

S&F PVC (SWR) bend 110mm dia any radius all as specified.

S&F PVC (SWR) bend 75mm dia any radius all as specified.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 75 mm dia all as specified

S&F PVC (SWR) junction single (single T) equal or unequal (75/ 110mm dia) all as specified.

S&F PVC (SWR) vent cowl 75mm dia all as specified.

S&F PVC(SWR) floor trap, plain with grating including jointing with solvent cement & fixed to 75mm dia out let. Including dismantling of tiles and packing the trap with cement concrete and connecting with PVC bend complete all as specified.

S&F Stack clamps for 100/110 mm bore of pipe made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof etc all as specified.

S&F Stack clamps for 75 mm bore of pipe made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof all as specified.

Taking up or down steel tubing and connections 15 mm bore complete all as specified.

Taking up or down steel tubing and connections 20 mm bore complete all as specified.

Refixing old steel tubing and connections in new or old position (wall, ceiling, floors etc) for 15 mm bore of pipe.

Refixing old steel tubing and connections in new or old position (wall, ceiling, floors etc) for 20 mm bore of pipe all as specified.

S&F galvanised mild steel water tubes,15 mm bore with all fittings, 'medium grade', ISI marked, galvanised, fixed to walls and ceiling or laid in floors complete all as specified.

S&F galvanised mild steel water tubes,20mm bore with all fittings, 'medium grade', ISI marked, galvanised, fixed to walls and ceiling or laid in floors complete all as specified.

S&F in repair rotational moulded HDPE water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, ISI marked, double layered hoisted and fixed in position including connecting up pipes including 20mm bore brass body ball valves, high pressure and 25mm bore gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified.

S&F PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe 600mm long, fixed in repair complete all as specified and directed.

S&F vitreous China squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate ) bedding, connection to trap, outgoing flushing pipe, anti sypohonage pipe,100 mm bore 'P' or 'S' of pipe etc, fixed in repair complete all as specified.

S & F in repair vitreous China wash hand basin white flat back of size 550 mmx400mm fixed on and fixing of cantilever brackets of mild steel angle 35 mm x 35 mm x 5 mm, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe (rigid quality) including fixing of tap etc. complete all as specified and directed. Note :- Pillar tape shall be measured & paid seperately as supply only under respective item of BoQ".

Supply only pillar tap cast copper alloy with capstin heads chromimium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nuts, screwed for iron pipe 15 mm bore complete all as specified.

S&F in repair brass chromium plated shower rose 65mm to 90 mm size with swivel joints, complete all as specified and directed by Engr-in-Charge

S & F kitchen Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboaratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including supply and fixing cantilever brackets of mild steel angle 35 mm x 35 mm x 5 mm, 32mm dia brass waste coupling ,32 mm dia PVC waste pipe (rigid quality) and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410 mm x 330 mm x 160 mm, fixed in repair complete all as specified and directed.

S&F tubular towel rail of brass chromium plated, 20 mm dia, 'D' type, 60 cm long between flanges ,fixed in repair complete all as specified and directed.

S& F in repair PVC connections 15 mm, 450 mm length with PTMT nuts at both ends complete all as specified and directed.

S&F in repair bib taps long body cast copper alloy chromium plated with capstan head screwed down, screwed for iron pipe or for brass ferrule 15 mm bore of approved make complete all as specified and directed.

S&F in repair for 15 mm bore angle valve cast screwed down, high pressure, with crutch or butter fly handle, for iron pipe or for unions complete all as specified.

S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15 mm bore, fixed in repair complete all as specified and directed by Engr-in-Charge

S &F in repairs grating round 100 mm size with waste hole of Stainless steel (minimum weight 100 gms) complete all as specified and directed by Engr-in-Charge

S&F mild steel tubing of 25 mm dia with PVC coating for curtain rod fancy decorative type including fancy type PVC rings decorative holder and chromium plated brass brackets (wall to wall or flush to wall) for securing to curtain rod, fixed in repair complete all as specified and directed by Engr-in-Charge

S&F in repair vitreous china wash down water closet pan (pedestal pattern),white, complete all as specified and directed by Engr-in-Charge

S&F in repair plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engr-in-Charge

S & F in repair, Toilet paper holder of vitreous china fixed to walls with chromium pated (CP) brass screws, complete all as specified and directed by Engr-in-Charge.

S&F in repair health faucet with min 1.5 m long glexible pipe incl necessaey arrangement for hanging and connection to GI pipe or stop valve complete all as specified and directed by Engr-in-Charge

S&F in repair stainless steel plate rack (utensil rack) of size (1200 mm x 900 mm) and depth 300 mm made with 0.63 mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/ bolts, complete all as specified and directed by Engr-in-Charge

S&F in repair galvanized steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with galvanized steel wire steples complete all as specified and directed by Engr-in-Charge

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge

M&L for Non skid ceramic joint free coloured tiles 300 x 300 x 7 to 8 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed by Engr-in-Charge

Glazed ceramic coloured tiles 300 x 200 x 6 to 7 mm thick, in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed by Engr-in-Charge.

M/S B A Traders

M/S MOHAMMAD YOUSUF RATHER