Upgradation of Bedroom, Bathroom and interior arrangements in 14 rooms of First floor at Hotel Tamilnadu, Thanjavur District.

Amount

Dismantling clearing away and carefully stacking the materials of floor and wall tiles etc., including stacking the materials useful for reuse as directed by the corporation Officers etc.,complete.complying with standard specification

Dismantling and clean removal of cement plaster from walls and upto exposure of bricks including stacking the materilas for reuse etc., complete.complying with standard specification

Dismantling,clearing away and carefully stocking the materials useful for the reuse of EWC,Wash basin and pipelines etc., complete.complying with standard specification

Providing polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust,foreign, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier.the mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface.After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour, etc., complete.complying with standard specification

Brickwork in Cement Mortar 1:5 (One cement and five sand) using IInd class Ground moulded chamber burnt bricks of size 9"x4½"x3" including cost and conveyance of all materials and labour charges and all other incidental charges etc.,complete complying with standard specification.

Plastering in cement mortar 1:5 (One cement, and five sand) 12mm thick including curing and finishing neatly complying with standard specification and as directed by the Corporation Officers etc. complete.complying with standard specification

Flooring with Anti Skid ceramic tiles of approved quality, colour design and of size 600mmx600mmx8mm laid in cement mortar 1:3 (One Cement and Three Sand) 20mm thick including pointing the joints with same colour cement to the full depth of the tiles including cost and conveyance of all materials and labour etc. complete.complying with standard specification

Dadooing the side walls with joint free special glazed Vitrified tiles of Rak or Equivalent approved quality colour, design and of size 600mmx600mmx8mm in cement mortar 1:2 and pointing with white cement including finishing the joint and polishing the tiles surface glass etc.complete.complying with standard specification

Flooring with Double Charged Vitrified Tiles Matt/Glazed finish of approved quality, colour design and of size 800mmx800mmx10mm laid in cement mortar 1:3 (One Cement and Three Sand) 20mm thick including pointing the joints with same colour cement to the full depth of the tiles including cost and conveyance of all materials and labour etc. complete.complying of standard specification.

Supply and fixing 35mm thick Solid core flush door shutters with Teak ply on both sides with Teakwood lipping alround of required size. The rate is including polishing with melamine polish ,and fixing furniture fittings such as 150mmx25mmBrass hinges-3 nos,200mmx12mm Brass tower bolt -2 nos,Brass door stopper-1 no and Brass ornamental handles for inner and front etc., as directed by the corporation officers complying with standard specification.

Supplying and fixing in position of 10mm thick Ornamental FALSE CEILING arrangements with aluminium anodised ' T' Section and 'L' angle frame work of grid size 60x60cm with aluminium T section and 'L' angle of size 25x25x2mm thick and the same is supported @ suitable intervals by adjustable type 6 mm dia MS rod with suitable threaded nuts suspended rods hung from ceiling at 120 cm c/c in both directions and fixing Gyp board in the Grid so as to give a seat to false ceiling including painting the 6mm dia MS rod etc.,Necessary opening and arrangements for fixing electrical fitings should be provided with suitable frame work 8 mm thick calcium silicate board designed and perforated for false ceiling etc.complete complying with standard specification

Supplying and fixing Cornice 4"x4" with plaster of paris (Ready Made) including one coat of primer etc., complete.complying with standard specification

Supplying and fixing Hydraulic door closer of approved quality using Aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment like HARDWYN make, GAZEL or equivalent with ISI Monogram etc., complete.complying with standard specification

Supplying laying, jointing in position of best quality PVC waste pipe (6kg / cm) of approved make (Finolex) and providing leak proof joints including making connection to all Sanitary fittings, dismantling, masonry, RCC works wherever necessary and making good of dismantled portion complying with standard specifications

110 mm dia PVC Pipe

75 mm dai PVC Pipe

Supplying, laying and jointing of following dia CPVC pipes of approved ISI make and quality including fixing CPVC specials but excluding cost of CPVC specials and cutting, threading of pipes , concealing the pipes into wall with necessary clamps and nails , dismantling the wall, laying pipes and making good the dismantled portion to original condition with necessary brick work and plastering wherever necessary etc. complete as directed by the Corporation Officers.

25mm dia CPVC pipe

20mm dia CPVC pipe

15mm dia CPVC pipes

Supply and fixing the following PVC and CPVC specials for pipe connection arrangements for inlet outlet source and overflow etc., including cost of pipes specials valve labour charge for lifting aligning, cutting,threading and fixing in position etc.,complete as detailed below.

25 mm Dia CPVC Elbow

25 mm Dia CPVC Tee

25 mm Dia CPVC coupling

25 mm Dia CPVC Union

20mm Dia CPVC Elbow

20mm dia CPVC Tee

20mm dia CPVC Union

20 & 15mm dia CPVC elbow

75mm dia PVC Plain elbow

75mm dia PVC Door Elbow

75mm dia PVC Door Tee

75mm dia PVC Tee

110mm dia PVC Door Tee

110mm dia PVC Bend

110mm dia PVC Cowl

110mm dia PVC Tee

Supplying and fixing 25mm dia Gun Metal values (Heavy Duty), GI fittings, pvc specials of various sizes of approved quality and ISI brand as per standard specification

Supply and fixing 100 mm dia PVC Nahini trap of size with SS Gratings 100mm x 75mm of approved quality etc. complete as directed by the Corporation Officers.

Supplying and fixing in position best quality (Hindware or Equivalent) approved make, colour glazed Earthenware wash hand basin oval shape of size 560x450mm in granite table top including cost of 15mm brass chromium plated pillar cock 32mm dia CP bottle trap, 15mm dia CP angle valve, 15mm dia brass nipple, 15mm dia Nylon connections including fixing the hand wash basin in position with a pair of M.S. angle 50x50x6mm etc. Complete as per standard specification.(wash hand basin should be got approved by corparation officials before use on work)

Supplying and fixing in position White / Colour Glazed Mario EWM Model Cascade Type Parryware / Hindware / Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 7.50 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Departmental officer before use on works) with 10 litres capacity flushing tank with all internal dual flush fittings with normal seat cover Wall Fitting

Supplying and fixing of CP Angle Cock Tap type 15mm dia of Heavy duty make including testing for leakage etc., complete complying with standard specification.

Supplying and fixing in position CP shower rose with CP Shower Arm of Hindware/Jaquar or Equivalent of size 15mm dia inlet and 100mm dia outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the departmental officers before use on works).

Supplying and fixing in position Indian make bewelled edge mirror of approved quality and brand of size 1000 X 780mm with necessary 8mm water proof ply back, PVC frame with bottom stand of approved colour with brass screws,rawal plugs etc., complete complying with standard specifications. (The mirror Should be got approved by Engineer before use on works.) mirror of approved quality and brand of size 1000X 780mm with necessary plastic back, PVC frame with bottom stand of approved colour with brass screws,rawal plugs etc., complete complying with standard specifications. (The mirror Should be got approved by corparation officials before use on works.)

Supplying and fixing 60 CM S.S Towel Rack of ( Essess or Equivalent) approved make as per standard specifications

Supply and fixing CP type Soap dish jaquar or equivalent etc ., complete as directed by the corporation officers complying with standard specifications.

Supply and fixing in position of Heavy Duty make S.S Screw Down long body tap or any ISI approved make and quality of 15mm dia S.S Screw Down long body tap etc. complete. complying with standard specifications.

Supply and fixing of Health faucet of approved quality and make including fixing in position etc., complete.complying with standard specifications.

Supply and Fixing 15mm dia Brass CP Hot and Cold Wall mixer 3 in 1,CP shower Arm and CP Shower rose of Hindware or equivalent and ISI approved quality including cutting, threading and jointing using adhesives etc., complete complying with standard specification.

Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The wall putty shall be got approved by the departmental officer before use of work).

Painting Two coats with Plastic Emulsion paint (Dr.Fixit or equivalent) over one coat of primer (Prime seal of Dr. Fixit or equivalent) after cleaning the surface over old wall surfaces including scaffolding etc., complete. as per standered specification.

Painting one coat with ready mixed Synthetic enamel paint of approved quality and colour over mild steel grills including cleaning, preparing the surface etc., complete.complying with standard specifications.

Supplying, fabrication and fixing of 30mm thick both side pre laminated WPC door shutter with frame of required size 0.75m x 2.00m & 0.90 x 2.00m including necessary brass furniture fittings such as 125mm x 25mm brass hinges-3Nos , 200mm x 12mm brass tower bolt - 1No, 150mm x 12mm brass tower bolt - 2Nos,150mm brass handle - 2Nos, cylindrical lock - 1No, T.W lippings around the shutter etc., including cost, conveyance of all materials and labour charge for fixing complying with standard specification.

Supply and fixing T.W Head rest of size6.00x1.20m as per the drawing enclosed.The Head rest to be made with 19mm thick BWP plywood over the 2"x1" size Teak wood Scantling frame.The frame to be fixed at 0.6mm centre to centre interval both Horizontally and Vertically on the wall with necessary screws and nail . The exposed surfaces to be finished with 4mm thick veneer of approval quality and design .All the veneer portion to be polished with melamine polish matt finish.The rate is including cost of all materials labour and conveyance etc,. complete.complying with standard specifications.

Supply and fixing in position of ribbed wood wall panelling using 19mm Tk WBP plywood 50mmx25mm teak wood beading at 50mm interval and finished with 4mm thick veneer sheet including polishing with melamine polish etc., complete as direded directed by the corporation offices.

Supply and fixing of dressing mirror of size 0.78x1.00m with Luggage rack size 1.80mx0.45x0.15m.The unit to be made with termite proof/water proof plywood of 19mm thick as shown in the sketch.The exposed surfaces to be finished with 4mm thick veneer sheet of approved quality and colour. The mirror to be provided with 55mm thick special type of approved quality and the luggage rack should leave one drawer arrengements of file 0.30mx0.45mx0.15m .The luggage supported by 4nos of M.S angle of size 2"x2"x1/4"-0.60m and embedded on wall. the rate is including cost of materials labour for fixing etc. complete.complying with standard specifications.

Supplying and fixing wooden cot side box with drawer arrangements of overall size 0.45x0.45x0.45m to be made with 19mm tk WBP plywood in all sides. In the side box one drawer arrangements to be made. All exposed surfaces to be finished with 4mm thick veneer sheet and polished with melamine polish to glossy finish. The rate is including cost of all material and labour charge for making etc. completed.complying with standard specifications.

Supply and fixing of Dressing stool of size 0.45mx0.45mx0.45m as shown in the sketch made out of 18mm thick BWP plywood of approved colour and design having load bearing capacity of 100kg/m2 and resistance to insect attack,fungus , water and fire etc., complete. The exposed surfaces to be finished with 4mm thick veneer sheet and polished with melamine polish. complete,complying with standard specifications.

Supply of SS Chairs made out 1" dia SS ERW tube 16 gauge with 1 ring made with 12mm SS ERW tube with 3" cushion for both seat and back covered with good quality of fabric cloth. The four legs and three cross supports to be provided for back rest. The rate is including cost and conveyance of all materials etc., complete.complying with standard specifications.

Supplying and fixing of Ornamental Teapoy of size 90x60x60cm(H) made out of best teak wood scantlings (3"x3" legs),2"x2" teak wood runners all round top and bottom and intermediate and 2"x1" teak wood runners at 0.10m centre to center for rack arrangements and top covered by 10mm thick plain glass with grinded edges all round and finishing the wood surfaces with best melamine polish finish etc., complete.complying with standard specifications.

Providing TW Ornamental decorative cot of size 1.55m x 1.85m using TW scantling of size 50mm x 150mm for all round frames, 50mm x 150mm for intermediate frames (4 Nos) and 0.10m x 0.10m x 0.38m for legs. The top portion is covered with 19mm thick BWR termite free water proof plywood. Necessary TW carved beadings of size 40mm x 15mm are to be provided on top and bottom of alround frame, as per the photo model. The alround frame is to be made with ornamental design carving works and the entire exposed surfaces to be polished with melamine polish to a glossy finish after preparing the surface with required sealer coatings. The rate is including cost and conveyance of all material and as directed by the corporation officers complying with standard specification. 1 No TW cot size 1.55m x 1.85m

Supplying and fixing of window curtain Track etc., complete.complying with standard specifications.

Supplying and fixing of curtains with frills arrangements of approved design match to the interiors including stitching with polyester backing cloth all inclusive etc., complete.complying with standard specifications.

Supplying and fixing open type wardrobe of size 2½'x6' made out of 18mm thick partial board with both side laminated. All edges to be finished with same colour tape mica by fevicol SR. The rate is including cost and conveyance of all materials etc., complete.complying with standard specifications.

Supply, fabricating and fixing in position of TV cabin below television as shown in drawn of size 3.00m x 0.45mx 0.60m made with 19mm BWP Plywood finished with 1mm thick laminated sheet of approved quality etc., complete. The rear side is to be projected to a height of 6" on 3 sides. The rate is including cost of all materials, conveyance, labour for making and fixing in position etc., complete. complying with standard specifications.

Conveyance charges for loading and unloading of debris dismantled bath room tiles etc., clearing away from the side to 10 km apart through lorry etc., complete complying with standard specifications.(1 Load =2.83 M³)

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator)

Wiring with 2 x 4 sq.mm. (56/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitablePVC rigid pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with painting of suitable colour for Concealed PVC pipe power Plug point.

Wiring with 2x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point.

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug)

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.

Supply and run of RG-06 unarmoured Co-axial cable for TV in rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour.

Supply and run of 2 pair unarmoured 0.5mm telephone cable in rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour.

Supply and fixing of 1 no one module TV socket with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections.

Supply and fixing of 2 nos one module RJ-45 I/O socket ans 2 nos RJ-11 I/O Socket with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections.

Supply and installation of 18W 9 inches square/round false ceiling fitting white/ warm white colour glowing with its electrical connection etc., complete.

Supplying and fixing of approved quality suspended hanging light complete in all aspects complying with standard specification.

Supply and installation of 20W 4 feet LED tube light fitting with its electrical connection etc., complete.

Supply and installation of LED foot lamp light fitting with its electrical wiring connection etc., complete.

Supply and installation 8 inches PVC Air ventilation Exhaust fan with its electrical connection etc.,complete.

Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230v 50 c/s single phase AC supply on suitable TW board with push switch to that with its electrical connection etc., complete.

Supply and fixing of 32A key tag legrand make or equivalent to that, with its electrical connection etc., complete.

Removing and reinstallation of 1.5 TR split type AC unit with its copper tube, copper bend, Rubber hose, brazing rod and accessories complete., etc.

Supply and installation of 18W 2 feet LED mirror light fitting with its electrical connection etc., complete.

GST at 18%

TPR CONSTRUCTIONS (BID ID -1223723)